Lucci decor 269603 Celine Table Lamp Instruction Manual
- June 4, 2024
- Lucci decor
Table of Contents
Lucci decor 269603 Celine Table Lamp
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this product. Please keep the instructions for future reference
Warranty
- This luminaire is covered by a 12-month warranty from the date of purchase. Please retain the proof of purchase.
- Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
- Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.
Installation Requirements
-
Select a suitable location for this luminaire:
- Ensure it is on a flat and stable surface.
- This product is suitable for indoor use only.
- Do not place flammable material near or over the luminaire.
- Ensure the luminaire is not installed in the direct line of an air vent/system.
- If the luminaire is placed in an area prone to moisture, ensure that the area is well ventilated, and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty.
-
Do not exceed the maximum wattage rating.
-
Take care not to pull any electrical wires during unpacking as this may damage the connection.
-
Lay out all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement. -
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
-
Do not plug into the mains power socket-outlet before or during assembly. Only do so after the portable lamp is fully assembled with the globe installed and is ready to use for the first time.
Installation Directions
-
Remove all packaging material from the product and fabric lamp shade.
-
Install the holding bracket onto the glass lamp shade (Sold separately).
NOTE: The lamp shades are sold separately under the following SKU#s: SKU# 269604 (Frost/Rib black) SKU# 269605 (Opal black) SKU# 269606 (Smoke black) SKU# 269611 (Frost/Rib white) SKU# 269612 (Opal white) SKU# 269613 (Smoke white) -
Align the bracket of the lamp shade to the magnetic of the lamp base. Check and ensure the lamp shade is attached stably onto the magnetic points.
-
Install an E27/ES globe (A – Not included) into the lamp holder. Do not exceed the maximum rated wattage.
-
Select a suitable location for the luminaire. See the installation requirements above.
-
Insert the plug into the mains power socket outlet and ensure it is fully plugged in.
-
Turn the power on at the mains power socket outlet.
-
Use the cord-line switch to turn the luminaire on/off.
Installation Instructions
Safety Tips
- Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire.
- This luminaire’s external flexible cable or cord cannot be replaced; if the cable or cord is damaged, the luminaire shall be destroyed.
- To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
- Young children should be supervised to ensure that they do not play with the portable lamp.
- Handle the luminaire and shade with care to avoid any damage or breakage.
- Select a suitable location away from liquids and hazards.
- To clean, wipe with a soft damp cloth. Do NOT soak or immerse the product in water or other liquids.
- Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
Specifications
Specifications
SKU #
|
269603
|
269610
Colour
|
Black
|
White
Glass shade
| Sold separately under the following SKU# SKU# 269604 (Frost/Rib Black) SKU# 269605 (Opal Black) SKU# 269606 (Smoke Black)| Sold separately under the following SKU# SKU# 269611 (Frost/Rib White) SKU# 269612 (Opal White) SKU# 269613 (Smoke White)
Rated Voltage
|
220-240V~ 50Hz
Rated Wattage
& Lamp Holder
|
45W Max. ES/E27 globe
Weight
|
3.0kg
Dimensions
| L:150mm W:140mm H:95mm (Excluded glass shade)
L:250mm W:150mm H:290mm (Included glass shade)