Yimao Technology YM-JQ-350YK Rechargeable LED Light Instruction Manual
- May 15, 2024
- Yimao Technology
Table of Contents
YM-JQ-350YK Rechargeable LED Light
Instruction Manual
YM-JQ-350YK Rechargeable LED Light
- Put the specification in the place where it needs to be installed, mark the approximate position of the hole on the wall with a pen.
- Drill two holes on wall .
- Fix the screws on the wall.
- Hang the lamp base on the screws and tighten the screw in side of base. Done
Using method:
- Recharging: Use the cable in package to charging with the USB-C port.
- Power display: lt respectively displays 30%-60%-90% power. The indicator ight will be on when the light is on, the corresponding power ndicator will flash during the charging process, and the indicator will stop flashing when t is fully charged.
- 3 Light Colors: After turn ight on, just tap the touch sensor to choose ight colors.
- Turn Light on /off &Dimmable: Short press the another touch sensor to turn light on/off long press to dim.
- Remote Control: The remote control distance s 4M/13FT.Aim at the picture ight.
Warranty:
Dear Customer: For your better using experience, We offer 1 year after
sale service, lf you have any question, please don’t hesitate to contact us v
a amazon email from your order page. we are always here providing prompt
response and good solutions to you within 12 hours.
Information
| Item Name | Picture Light | Model | YM-JQ-350YK |
|---|---|---|---|
| Voltage | DCSV | Electric ty | 2A |
| Material | A uminium+iron+PC | Light Source | LED |
| CCT | White/Warm/Nature | Wattage | 2.SWMAX |
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>