FALCON EYES FAL-F7II PockeLite RGB LED Light User Manual

F7II
RGB LED Light

Product Overview

Scene mode

1. Press the F dial to switch between lighting scene effect and its speed;
2. Turn the F dial up or down to select the lighting effect scene or lighting effect speed;
3. Turn the brightness dial up or down to adjust the brightness.

RGB mode

1. Press the F dial to select the Red, Green, Blue parameters to be adjusted;
2. Turn the F dial up or down to change the selected parameter.

L_GEL mode

1. Press the F dial to select the L_GEL color code;
2. Turn the brightness dial up and down to adjust the brightness.

R_GEL mode

1. Press the F dial to select the R_GEL color code;
2. Turn the brightness dial up and down to adjust the brightness.

Bluetooth reset

1. Press the F dial to select “?”;
2. Turn the F dial up to display “YES”;
3. Press the F dial to reset Bluetooth connection.

Product Specifications

USB charging port:5-15V2A / Support QC3.0 quick charge / Type—c USB charging port
CRI| 96
LUX| 2500K: 0.3m 4900 / 0.5m 1610 / 1m 397 / 2m 101
5500K: 0.3m 5230 / 0.5m 1750 / 1m 434 / 2m 111
Footcandles| 2500K: 0.3m 455 / 0.5m 150 / 1m 37 / 2mQ 9
5500K: 0.3m 486 / 0.5m 163 / 1m 40 / 2m 10
Dimensions| 160x86x15mm
Weight| 365g
Temperature permit range| -8°c — 38°c /O°c -35°c /Storage -8°c – 65°c

DeSal Lite+
App Lighting Remote Control App

iOS
“DESAL Lite+”
Seach “DESAL Lite+” on  APP Store to download

Android Harmony OS
http://www.falconeyes.com.hk/DeSalLite+.apk
Use your scan tool scan the QR code to download

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Designed by FalconEyes in China

Warranty Card (For Staff)
Date :
Department: ____
Staff :
Fault conditions : ____

Warranty Card (For user)
Name : ____
Model : ____
Date of purchase : ____
Tel : ____
Address :

Warranty Notice
If the user needs to maintain the product during warranty period, please fill out this warranty card and send the product (along with warranty card) to the assigned service point.
The situations below will not be considered in the warranty.

1. The warranty period is expired. (One year warranty, starting from the date of purchase)
2. Any damage or loss caused by man-made and unauthorized repair or modification.
3. Any damage caused by misuse. (E.g. using the light in humid, overheat or frozen environment; impact; high voltage charging and inflow of any liquid etc.)
4. Accessories are not covered by the warranty.
   www.falconeyeshk.com www.falconeyes.com.cn

Remove the protective film before use

Precautions

Please read this manual before using the light and follow the instructions. Make sure that the product is intact and that there are no missing parts. Do not open or repair the unit yourself. If there is any defect, please contact an expe rienced technician.

List of items

Product Overview

On/Off & Function Switch

1. Press & Hold the power button for 1.5 seconds to turn on or off;
2. Press the power button to switch the light mode.

Color Temperature Mode

1. Press the F dial to select the color temperature or GM parameter;
2. Turn the F dial up and down to change the parameters;
3. Turn the brightness dial up and down to adjust the | (Intensity) parameter.

HSI mode

1. Press the F dial to select the H (hue) or S (saturation) parameter to be adjusted;
2. Turn the F dial up and down to change the parameters;
3. Turn the brightness dial up and down to adjust the | (Intensity) parameter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>