PHILIPS WT065C LED Ledinaire Waterproof User Manual
- May 15, 2024
- Philips
Table of Contents
WT065C LED Ledinaire Waterproof
User Manual
WT065C
WT065C LED Ledinaire Waterproof
Dimensions (mm)
Product Description| CCT(K)| System light
output(Lm)| 23/42| Energy Efficiency Class
of Light source| L| A|
WT065C LED29_48S/840 PSU L1200| 2900/4800| 30/53| D| 1207| 660-880| 1.15
WT065C LED41_68S/840 PSU L1500| 4100/6800| 23/42| D| 1507| 940-1160| 1.35
WT065C LED29_48S/840 PSU L1200 TW1| 4000| 2900/4800| 30/53| D| 1214| 660-880|
1.3
WT065C LED41_68S/840 PSU L1500 TW1| | 4100/6800| P(W)| D| 1514| 940-1160| 1.5
Cable
gland MUST be installed before installation, to safeguard IP protection.
| LED29_48S| | LED41_68S
---|---|---|---
I max| 14.2| | 15
Tref [µs)| 222| | 240
| | Max. Nr of products|
Drivers/ MCB16A tyoe Bl max.I| 36| | 31
Drivers/ MCBlOAtype B[max.]| 22| | 19
Drivers/ MCB16A tvoe Clmax.l| 60| | 52
Drivers/ MCBlOAtvpeClmax.l| 37| | 32
ATIENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
-The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
-Do not store/install/use the luminaire in corrosive environment with hazardous substances, e.g., Sulphur, chlorine, phthalates etc., or on the location where it is exposed to conductive dust, heavily grease (esp. mineral oil or distillates, e.g., petroleum), heavily naphthenic treated with hydrogen.
-Do not install the luminaire on the location where it is exposed to direct sunlight. UV radiation will damage the material over time, resulting in loss of waterproof sealing and IP65 rating.
-Do not stare into LED light beam.
-This product is not suitable for cold & humid storage areas, especially where obvious temperature gradients are present, such as ventilation opening, door, etc.
Disconnect before servicing
The light source and/or control gear and/or the external flexible cable
countified in this luminaire shall duly be replaced by the manufacturer or his
service agent or a similar qualified person.
This product contains a light source of energy efficiency class: see table RO
or label.
Storage, installation, use, operation and maintenance of the products needs to
be performed exactly according the instructions in this manual and/or other
instructions as may be provided by us to guarantee safe use of the product
over its entire lifetime. Failure to adhere to these instructions wil
invalidate your entitlement to warranty. Bolts with indication of torque
strength on the drawing need to be lightened using a cab rated torque wrench.
Pre-assembled bolts need to be retightened again to the required torque
specification to assure maximum strength over lifetime. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>