EAGOU GIARY MR20190617020202 Professional Woods Lamps Skin Analyzer Instruction Manual
- May 15, 2024
- EAGOU GIARY
Table of Contents
EAGOU GIARY MR20190617020202 Professional Woods Lamps Skin Analyzer
Product Information
Specifications:
- Weight: 2.12 pounds
- Size: 11.39 x 7.88 x 2.95 inches
- Material: ABS
- Light Source: 4PCS*365nm UV lamp tubes
- Plug Type: US plug
Working Principle:
Dermal melanin and collagen can emit blue fluorescence after absorbing a
long wave of UV light. The fluorescence’s manifestation will change following
different skin conditions, which mainly depends on the condition of epidermis
and dermis. The skin state which can’t be identified by our naked eye can be
clearly detected and displayed by the professional woods lamp skin analyzer.
Product Usage Instructions
- Clean the protective cover and magnifying lens.
- Clean the skin surface or the part you want to detect.
- Connect the power cord of the lamp to the power supply, press the switch then the light will be on in a few seconds.
- When using the skin analyzer lamp, it should be kept at a distance of 5-6cm from the skin surface.
- Observe the skin through the magnifying glass in a dark room. You can install the black shield to create a dark environment.
Analyzer Lamp’s Indication & Skin Condition:
| Analyzer’s Lamp Indication | Skin Condition |
|---|---|
| Blue white | Normal and healthy skin |
| Bright fluorescent | Hydrated skin |
| Purple fluorescent | Thin skin without enough moisture |
| Light violet | Dehydrated skin |
| Yellow or sometimes pink | Oily areas of the face and comedones |
| Brown | Pigmentation and dark spots |
| White spots | Horniness layer of the skin and dead cells |
| White fluorescence | Thick cornium layer |
Frequently Asked Questions (FAQ)
-
Q: How should I clean the woods lamp skin analyzer?
A: You can use a soft cloth dampened with mild soap and water to wipe the surface of the lamp gently. Avoid using harsh chemicals that may damage the lamp. -
Q: Can the woods lamp skin analyzer be used on all skin types?
A: Yes, the analyzer can be used on various skin types, but results may vary based on individual skin conditions. -
Q: How often should I use the woods lamp skin analyzer?
A: It is recommended to use the analyzer once every few weeks to monitor changes in your skin condition over time.
Please read the instruction before using the lamp.
Product Specifications
- Weight: 2.12 pounds
- Size: 11.39 x 7.88 x 2.95 inches
- Material: ABS
- Light Source: 4PCS*365nm UV lamp tubes
- Plug Type: US plug
Packing List
- 1*woods lamp skin analyzer
- 1*operating instruction
- 1*detachable black shield
Working Principle
Dermal melanin and collagen can emit blue fluorescence after absorbing a long wave of UV light. The fluorescence’s manifestation will change following different skin conditions, which mainly depends on the condition of epidermis and dermis. The skin state which can’t be identified by our naked eye can be clearly detected and displayed by the professional woods lamp skin analyzer.
Use Steps
- Clean the protective cover and magnifying lens.
- Clean the skin surface or the part you wanna detect.
- Connect the power cord of the lamp to the power supply, press the switch then the light will be on in a few seconds.
- When using the skin analyzer lamp, it should be kept at a distance of 5-6cm from the skin surface.
- Observe the skin through the magnifying glass in a dark room. You can install the black shield to create a dark environment.
Analyzer Lamp’s Indication & Skin Condition