AUN M6 Auto Focus Projector User Manual

AUN M6 Auto Focus Projector

Product Information

Specifications:

• Focus Camera
• Lens
• IR Receiver
• 3.5mm Jack SPDIF/OPTICAL
• USB
• LAN HDMI
• Speaker
• AC Socket
• Air Vent
• Power/Focus Button
• Foot Pad e-Actuator

Safety Cautions:

• Do not put the projector where warm air flows directly to avoid product damage.
• Ensure no objects are blocking the vent to prevent overheating.
• Prevent foreign objects from falling into the projector.
• Keep the projector away from liquids to avoid damage.
• Use soft packing material during transport to prevent damage.
• Avoid looking directly into the lens when the projector is on to protect your eyes.
• Do not touch the front vent after long use to prevent burns.

Caution:

• Do not attempt to repair the projector yourself. Contact authorized customer service for help.
• Avoid placing the projector in rainy or moist environments to prevent fire or electric leakage.

Parts and Panel Instruction:

• Focus Camera
• Lens
• IR Receiver
• 3.5mm Jack SPDIF/OPTICAL
• USB
• LAN HDMI
• Speaker
• AC Socket
• Air Vent
• Power/Focus Button
• Foot Pad e-Actuator

Product Usage Instructions

Projector Locating:
Place the projector on a flat surface horizontally. Press the power button to turn on the projector.

Turn ON/OFF:

• Turn ON: Touch the button on the top of the projector or press the turn-on button on the remote control.

  ---

• Turn OFF: Touch the button twice on the top of the projector or press the button twice on the remote control to shut down the system according to the presented message.

Remote Operation and Pairing:

Remote Control Pairing:
Press the button of the remote control or enter into settings and select Remote & Accessories to go to the pairing interface. Press and hold the Bluetooth remote control for more than one second. The indicator light flashes quickly. After successful pairing, the indicator light changes from fast flashing to slow flashing for 2 seconds and then goes out.

FAQ:

• Q: What should I do if a foreign object falls into the projector?
  A: Turn off the power immediately and contact a professional technician to remove the object.

• Q: How do I clean stains or fingerprints on the lens?
  A: Use a cotton sheet with 75% medical alcohol to wipe the lens gently.

Please read this manual carefully before use and keep it for future use.

Safety Cautions

Thanks for your purchasing of our projectors. Please read through this user manual and keep it properly after reading it for future reference.

1. Do not put the projector in the place where the warm air flows from the air conditions directly. Condensation of water or high temperature may lead to product damage.
2. Please ensure no gathering things around the projector and the vent is not blocked to avoid overheating.
3. Please prevent foreign objects such as nails or paper scraps from falling into the projector. Don’t insert any metal objects such as iron wires or screwdrivers into the projector. If any foreign object falls in, please turn off the power immediately and ask a professional technician to take it out.
4. Put the projector far away from the liquid to avoid damage by liquid leakage.
5. Please use soft packing material to protect the projector if any long-distance transport is needed. In the meantime, prevent violent crashes and shaking. Use a cotton sheet with 75% medical alcohol to wipe the lens if any stains or fingerprints on it.
6. Do not look into the lens directly after the projector is turned on, the strong lights might hurt your eyes.
7. Do not touch the front vent after a long time running, the vent may be heated and might burn your skin.

Caution

• Please do not open the projector and conduct repair by yourself. If there is anything wrong, please contact with authorized customer service center for help.
• Please do not locate the projector in the rain or heavy moisture to avoid fire or electric leakage.
• Don’t pile objects around the projector
• Don’t locate the projector in hot or heavy moist
• Don’t block the air vents (in & out)
• Don’t put it in a dusty or smoky environment

Parts And Panel Instruction

Device Connectivity

Quick Guide

Projector Locating
Please put the projector on a top flat surface horizontally. Press the power button to turn on the projector.

Turn ON/OFF

• Turn ON
  Touch the button on the top of the projector or press the button on the remote control to turn on the projector.

• Turn OFF
  Touch the button twice on the top of the projector or press the button twice on the remote control to shut down the system according to the message presented.

Remote Operation and Pairing

Remote Control Pairing
Press the button of the remote control or enter into settings and select Remote & Accessories to go to the pairing interface, Press and hold the Bluetooth remote control for more than one second, and the indicator light flashes quickly, send pairing or clear pairing voice, after successful pairing, the remote control indicator light changes from fast flashing to slow flashing for 2 seconds and then goes out. If there is no pairing or the cancellation is successful, repeat the above operation.

Focus Adjust

Press the Focus+/Focus- buttons on the remote control to adjust the focus to make the image clear. Or turn on the Auto Focus setting to enable the autofocus feature, then it will adjust the focus automatically whenever any place or angle changes.

Home Interface Instruction

Wi-Fi Connection
Go to the Setting interface to select details of the Wi-Fi connections setting area. Or go to the settings menu by pressing the settings button on the remote control, select network & internet to choose the Wi-Fi and connect it as you want.

Apps Download and Installation
Move to the search interface and input the app name to find the right app to download and install.

Bluetooth Connection
Go to Remote & Accessories in the settings, select Add Accessory to search for Bluetooth devices and then choose the right one for connection.

File Browser
Go to MediaPlayer to select all kinds of files in internal or external USB memory devices to open and show on the screen such as audio, video or picture files. Users can install other file browsers for more file formats from the APP Store or Google Play Store if necessary.

Screen Mirroring
Open EshareSever in APPS, then follow the instructions shown on the screen to realize screen mirroring. (This feature is available for Windows, IOS and Android devices)

Quick Settings

Auto Focus
Go to Quick Settings in the settings, and select Auto Focus to enable the autofocus feature to free your hands for imperceptible focus adjustment.

Auto Keystone (Horizontal & Vertical)
Go to Quick Settings in the settings, and select Auto Focus to enable horizontal and vertical auto keystone features to keep the screen in normal shape and at the best view angle for the audience.

Auto Obstacle Avoidance
Go to Quick Settings in the settings, and select Auto Obstacle Avoidance to enable the auto obstacle avoidance feature to avoid obstacles located in the projection area automatically to keep the audience always watching complete images.

Auto Rotation Correction
Go to Quick Settings in the settings, and select Auto Rotation Correction to enable auto rotation correction for screen balance automatic adjustment.

Auto Position
Go to Quick Settings in the settings, The Auto Position feature is enabled by default. In this case, the e-actuator will lift to the right position when you hold the projector body for a few seconds, then it will project the image on the wall or screen in the right shape and position you want.

Silent Mode
Go to Quick Settings in the settings, and select Silent Mode to enable silent mode for more quieter system running while watching at night.

Virtual Mouse
Go to Quick Settings in the settings, and select Virtual Mouse to enable the remote control as a mouse to reach some point of some apps for full operation.

Bluetooth Speaker Mode
Go to Quick Settings in the setting, select Bluetooth Speaker and choose OK to enter into Bluetooth Speaker mode when there is a popping box appearing. Then find the projector Bluetooth name on your phone and tap it to pair to use the projector as a Bluetooth speaker. When the projector stays in Bluetooth speaker mode, the projector will stop projection.

General Settings

Image Setting
Go to Projector Setting in the settings, and select Image to adjust brightness, contrast, saturation, sharpness and colour temperature.

Sound Setting
Go to Projector Setting in the settings, select Sound to adjust the audio balance, bass, treble, and equalizer and enable or disable surround sound effects.

Source Input
Select Inputs in the setting or press the button on the remote, then select HDMI as a signal source mode, and press the OK button on the remote control to switch the input source from HDMI. You can enable and disable Consumer electronic control features such as HDMI Control(CEC/ARC), Device Auto power off, TV auto power on, and Menu control for a better user experience when extra HDMI devices are connected.

Projection Mode
Go to Projector Setting in the setting, choose Projection Mode to select the right mode for the projector according to the actual projection requirement.

Keystone Setting
Go to General Setting in the setting, choose Projector Setting, and turn off autofocus, then you can see Vertical Correction and Horizontal Correction for you to adjust the keystone in a vertical or horizontal direction.

Rotate Correction
Go to General Setting in the setting, choose Projector Setting, turn off autofocus, and then you can see Rotate Correction for you to adjust the image angle to keep balance.

Screen Zoom
Go to General Settings in the settings, choose Projector Setting, and turn off autofocus, and then you can see Screen Zoom for you to adjust the screen zoom in and zoom out.

Off-Axis Setting
Go to General Setting in the setting, choose Projector Setting, and turn off autofocus, then you can see Vertical Off-Axis and Horizontal Off-Axis for you to adjust the screen position in a vertical or horizontal direction.

Four Point Keystone
Go to General Setting in the setting, choose Projector Setting, turn off autofocus, and then you can see Four Point Keystone to adjust the keystone manually.

Custom Calibration
Go to General Setting in the setting, choose Projector Setting, and turn off autofocus, then you can find Custom Calibration to calibrate the image properly if image sharpness or shape abnormality happens. Follow the instructions on the screen to operate it during the calibration.

Language Setting
Go to System Preferences in the settings, select the language you want by pressing the up and down buttons, and then press the OK buttons to confirm it.

Screen Saver
Go to System Preferences in the setting, select Screen Saver then you can change the screen saver automation and when to start it.

Factory Restore
Go to System Preferences in the settings, and select Reset by pressing the OK buttons to start factory restore. This operation will erase all data from the device’s internal storage Google account, system and app data, settings and downloaded apps.

Basic Specifications/Parts

Projection Distance

Projection distance

The projection size and distance data here above in the table are calculated based on the throw ratio. The actual data may be different, so please just take it as a reference.

Cleaning Method

Cleaning Method

How to Clean

• Please disconnect the power adapter before cleaning.
• Please don’t use insecticide or other volatile chemicals on the projector or its lens.
• Please don’t let rubber or ethylene products contact the products for a long time. The coating will be damaged or peeled off.

Clean Projector

• Please wipe with a soft and dry cotton cloth. If it is very dirty, please wipe it with a soft cloth dampened with diluted neutral detergent and use a dry cloth to make it dry. If you use chemical fibre cloth, please be careful.
• To avoid damage or coating peeling off, please don’t use thinner, benzene or other solvents.
• Do not scratch the projector with nails or other hard objects to avoid scratching.

Clean Lens
Please use a professional cleaning kit such as an air blower, lens cleaning tissue etc. to clean the lens. Or it may cause scratches.

Clean Ventilation Holes

• Too much dust will cause the projector to overheat. Please clean ventilation holes at least every 1,000 hours of use.
• Turn off the projector>Disconnect the power adapter>Insert the brush into a mini vacuum cleaner>Use it to clean the outside of the projector
• Avoid direct use of vacuum cleaners without connectors, or use nozzles for cleaning.

Warm Hint:
The projector system might be updated Irregularly, and the operation maybe different, please refer to actual operations.

WARRANTY CARD

Please fill in the requested information for official service and warranty.

• Customer Name:
• Product Model:
• Series Number:
• Address:
• Date of Purchase:
• Dealer Name:
• Phone No.:
• Failure Description:

This warranty is void if the failure of the product and accessories or any part, sealant or component thereof is due to (i) misuse, (ii) tampering, (iii) negligence, (iv) misapplication, (v) abuse, (vi) accident, and/or, (vii) a failure to properly (a) maintain, (b) clean, (c) reassemble, (d) submerge.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>