ZO-Memory Memory 7 Pro Video Recording Monitor User Manual
- May 15, 2024
- ZO-Memory
Table of Contents
ZO-Memory Memory 7 Pro Video Recording Monitor
Packing List
- Carry Case*1
- Monitor*1
- Tempered Screen Protector*1
- User Manual*1
- HDMI Cable*1
- SDI Cable*1
- Hot Shoe Mount*1
- Dusting Cloth*1
- SD card*1
Buttons And Ports
- Power ON/OFF Button
- Custom Function Buttons
- HDMI Interfaces
- 3.5mm Headphone
- DC Input
- SD Card Slot
- 1/4″-20Thread Hole
- USB Upgrade Port
- NP-F Battery Plate
- SDI Interfaces
Monitors Assist Icons
User Interface
- Video Input
- Resolution
- Zoom
- SD Card
- 3D-LUT
- Power Indication
- Switching Signal
- Waveform Menu
- Marker Menu
- Focus Menu
- Exposure Menu
- Color Menu
- Recording and play back
- System Settings
- Lock Screen
- Playback Button
- Audio Meter
- REC Button
Operation Guide
-
Boot Method
Short press the power on/off button to turn on the monitor, long press 3 seconds to turn it off. -
RGB Gain and Offset
-
Format SD Card
-
Shortcut Key Preset
There are two shortcut keys, Fl and F2, F3, on the top of the host, and you can choose function presets.
-
High Precision Waveform
-
Matte
-
Peaking
-
HDR Monitoring
-
3D-LUT Input Method
-
Place the LUTfile in the LUTfolder on the SD card and insert the SD card into the monitor
-
Click the Color Menu-3D-LUT, turn on and then selecting Custom, click the Import button and wait for the system to retrieve the LUT file in the SD card that needs to be loaded
-
Click on the LUTfile that needs to be loaded, then click Import and wait for the file to be imported into the system
-
Click the LUTfile, enter the file selection, select the desired LUT, and click to confirm that the LUT is loaded successfully
Note: LUTfile name only support English, do not allow any other languages , special characters, spaces, otherwise it will fail to be imported 1 -
3D-LUT Output Method
-
Click the color management-3D-LUT icon, open X select the corresponding LUT file, and the preset LUT color adjustment effect can be recorded into the file synchronously during recording.
-
The LUT for HDMI/SDI output is the same as the LUT that is turned on.
-
DCI-P3
-
Recording Playback: Custom File Name
-
Trigger/TimeCode camera synchronization recording function
-
This position represents the camera position. click up and down to adjust
-
This position represents the shooting site, click up and down to adjust
-
This position represents the number of cameras, it is not adjustable and the digital number increases with the number of shootings
Notes
-
Exceptions in Connection
- a. Zoom, Anamorphic, Waveform, these three functions can only be opened one at a time. Such as when the Anamorphic function is open, has opened the Zoom or Waveform will be forced to close.
- b. When HDMI IN, there is no SDI output. When SDI IN, both HDMI and SDI can be output.
-
SD Card Description:
SD Card Identification and Use Problems- a. The SD card of this product does not support hot-swapping, if the SD card is inserted and removed during use, causing abnormalities such as the card cannot be recognized and the screen interface cannot be operated, please restart the device.
- b. The newly purchased SD card has to formatting by monitor’s “SD Card Format” function before normal use.
- c. The recommended capacity of SD card is 32G-128G
-
Record and Playback
The Abnormal Phenomenon of Using Recording and Playback: Synchronous recording (Trigger/TimeCode)- a. The camera needs to support HDMI Trigger/TimeCode
- b. Trigger/TimeCode function is turned on
- c. When recording video using 1080!60/50, the format of the recorded video will be converted to 1080P30/25.
Technical Parameters
Please-note:
- CD Recording file, It is under “Video” folder of root directory in SD card.
- The LUT file to be imported, It is under “Lut” folder of root directory in SD card, and the LUT files should not exceed 50.
Tel+86 0755-21004986
URL:wwwzeroone-video.com
Address:2C, 2nd Floor, Building 6, Longbi lndestrial Park
No.27 Dafa Road, Bantian Street, Longgang District.Shenzhen Shenzhen ZO Video
Technology Co., Ltd.