Hortensus HOR-SFL1.5W Fairy Dolar Lamp 1.5W Owner’s Manual
- May 15, 2024
- Hortensus
Table of Contents
Hortensus HOR-SFL1.5W Fairy Dolar Lamp 1.5W
Specifications
- Product Model: HOR-SFL1.5W
- Total Dimensions: 16286.576.7mm
- Power: 1.5 W
- Lumen: 220 LM
- Solar Panel: 0.5 Wp, Monocrystalline siliconsolar panel
- Battery: Lithium 14500/500mAh/3.7V, Replaceable
- Charging Time: 6-8 hours
- LED Type: SMD 2835*13 pieces (12 front + 1 back)
- Operating Time: 2-3 nights
- PIR Sensor Range: 6m
- IP Rating: IP65
- Material: ABS+PC, anti-UV, fire-resistant
- Installation Height: Less than 4m
- Net Weight: 0.15kg
- Warranty: 24 months (battery warranty: 12 months)
Features & Advantages
- Patent design, smart, beautiful, fluent structure design, durable, easy to install.
- Original created 360-degree IP65 waterproof.
- Front & back light shining, achieve the desired effect of both lighting and decoration.
- Special invisible buttons, modern and fashionable.
- Auto switch working mode, keep long lighting time.
- Adopt optical lens optimized light, not only makes the light much brighter, also Anti-UV.
- Multifunctional can meet different applications in different seasons.
- High-quality mono-crystalline silicon solar panel, high conversion solar photo electricity, high energy tans-action rate, long lifespan of more than 20 years.
- Use the new generation SMD LED as a light source, with the features of high brightness, low light decay, and long lifespan.
- High-performance lithium battery, bigger capacity brings longer lifespan.
- Scientific human induction design, wide angle detection way, makes the body movement detection in large angle and longer distance.
- The battery is replaceable, enhancing longer working time.
- Long lighting time, widely used for gardens, entrances, pathways, villas, schools, pavilions, etc
Product Image
Specifications
Installation Instruction
- Measure Card
- Expansion Plug
- Screws
- Notch
- Button
- Please use the card to measure hole positions and drill 2 holes.
- Fix 2 expansion plugs into the holes.
- Fix screws to the expansion plugs with a spare space.
- Hang the notch onto the screws and fasten the lamp.
- Press the button to turn on the lamp.
Working Modes
- When battery capacity >30%, the lamp automatically turns on to full brightness (220lm) when motion is detected in the range ≤6Mtrs and then turns to weak brightness (front light ON & backlight on) in 10 seconds of no motion.
- When battery capacity <30%, the lamp automatically turns on to full brightness (220lm) when motion is detected in the range ≤6Mtrs and then turns to weak brightness (front light OFF & backlight on) in10 seconds of no motion
Remarks
- The switch is a cut-off switch, which reduces battery consumption and enhances longer storage time.
- This lamp can get solar charged in any mode.
- This is a solar-powered lamp, please install it in a location where can get enough sunshine.
- Please kindly note the lighting time depends on sunshine duration and weather.
- The lamp will light up automatically at dusk and off at dawn.
- Built-in IC is with over-charge, over-discharge, and over-voltage protection.
- The lamp is equipped with an internal lithium battery, which is replaceable. If any need, please contact the seller for a correct new battery.
- If the battery is taken out and put back in or replaced with new ones, please toward the solar panel to sunshine or a strong light to activate the lamp.
- Non-qualified personnel should not disassemble the lamp.
- Please do not dispose of the battery with household garbage to avoid an explosion.
DECLARATION OF CONFORMITY
Confinity NV, Dorp 16, 9830, Sint-Martens-Latem, Belgium declares the
following device in sole responsibility:
- Brand name: Hortensus
- Product type: 1.5W Solar Wall Lamp
- Item number: HOR-SFL1.5W
Complies with the following harmonization rules:
- EN IEC 55015:2019+A11:2020
- EN IEC 61000-3-2:2019
- EN 61000-3-3:2013+A1:2019
- EN 61547:2009
- EN IEC 60598-2-1:2021
- EN IEC 60598-1:2021
- EN IEC 62493:2015
- EN IEC 62031:2020
Signed for and on behalf of:
Sint-Martens-Latem, Belgium – MARCH 2023
A. Pappijn – Product Manager
FAQ
(Frequently Asked Questions)
- Q: How long does it take to charge the battery?
- A: The battery charging time is between 6-8 hours.
- Q: What is the warranty period for the product?
- A: The product comes with a 24-month warranty, with the battery specifically covered for 12 months.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>