Hortensus HOR-BSL Butterfly Solar Lamp Owner’s Manual

June 10, 2024
Hortensus

Hortensus - logo

HOR-BSL Butterfly Solar Lamp
Owner’s Manual

Hortensus HOR BSL Butterfly Solar Lamp

Hortense’s butterfly solar lamp
www.hortensus.eu

HOR-BSL Butterfly Solar Lamp

Front & Back light shining, beautiful as a “butterfly”!
Please read and follow all instructions to operate.
Save this manual for future reference.

Features

| ZERO Electricity Cost
---|---
| PIR Detective
| Outdoor
| Solar Powered
| Light on/Off automatically
| Cordless

Working Modes

Hortensus HOR BSL Butterfly Solar Lamp - Working Mode

Please press the Button to adjust to different working mode:

Press 1st time for Mode A. Press 2nd time for Mode B.
Press 3rd time for Mode C. Press 4th time for of

Hortensus HOR BSL Butterfly Solar Lamp - Mode

Mode A: Automatically turns on at the dust (<30lux) and remains 20% bright, up to 5 hours after which it turns off.

Hortensus HOR BSL Butterfly Solar Lamp - Modeb

Mode B: Automatically turns on to full brightness (400lm) when motion is detected in the range ≤ 6mtrs and then turns to 3% brightness in 20 seconds of no motion.

Hortensus HOR BSL Butterfly Solar Lamp - Mode c Mode C: Automatically turns on to full brightness (400lm) when motion is detected in the range ≤ 6mtrs and then turns off in 30 seconds of no motion.

Installation

Hortensus HOR BSL Butterfly Solar Lamp - Installation

  1. Please use the card to measure hole position correctly and drill 3 holes of ɸ6mm.
  2. Fix 3 expansion plugs into the holes.
  3. Fix 3 screws into the expansion plugs with a spare space.
  4.  Insert the notch to the lower screw and fasten the whole lamp well.
  5.  Press the back button to adjust to the demanded working mode.

Notice

  1. This is a solar powered lamp, please install it in a location where can get enough sunshine.
  2. Please note the lighting time depends on sunshine duration & weather.
  3. The lamp will light up automatically at dusk.
  4. Built-in intelligent IC is with over-charge, over-discharge and over-voltage protection.

Warning

  1. The lamp is equipped with an internal Li-ion battery, which is replaceable. If any need, please contact seller for new battery, 18650 2000mAh/3.7V.
  2. When replacing the battery, please connect positive and negative electrode correctly.
  3. If the battery is taken out and put back in or replaced with new ones, please toward the solar panel to sunshine or a strong light to activate the lamp.
  4. Non-professionals please do not disassemble the lamp.
  5. Please do not dispose the battery with household garbage to avoid explosion.

DECLARATION OF CONFORMITY

Confinity NV, Drop 16, 9830, Sint-Martens-Late, Belgium declares the following device in sole responsibility:
Brand name: Hortensus
Product type: Hortense’s butterfly solar lamp
Item number: HOR-BSL

Complies with the following harmonization rules:
EN IEC 55015:2019+A11:2020
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN 61547:2009
EN IEC 60598-2-1:2021
EN IEC 60598-1:2021
EN IEC 62493:2015
EN IEC 62031:2020
Signed for and on behalf of:
Sint-Martens-Late, Belgium – JAN 2022
A. Pippin – Product Manager

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Hortensus User Manuals

Related Manuals