Hortensus HOR-BSL4W Butterfly Solar Lamp Owner’s Manual
- June 10, 2024
- Hortensus
Table of Contents
OWNER’S MANUAL
Hortensus butterfly solar lamp 4W
Please read and follow all instructions to operate.
Save this manual for future reference.
INSTALLATION
1. Hole
2. Expansion Plug
3. Screw
4. Mounting Hole
5. Button
- Please use the card to measure hole position and drill 3 holes of φ6mm
- Fix 3 expansion plugs into the holes.
- Fix a screw to the lower expansion plug with a spare space, insert the notch onto the screw.
- Straighten the whole lamp and fasten the upper screw.
- Press the button to adjust to demanded working mode.
Notice
- This is a solar powered lamp, please install it in a location where can get enough sunshine.
- The lamp will light up automatically at dusk.
- Please note the lighting time depends on sunshine duration and weather.
- Built-in intelligent IC is with over-charge, over-discharge and over-voltage protection.
Warning
- The lamp is equipped with an internal lithium battery, which is replaceable. If and need, please contact the seller for new battery.
- If the battery is taken out & put back in or replaced with new ones, please toward the solar panel to sunshine or a strong light to activate the lamp.
- Non-professionals please do not disassemble the lamp.
- Please do not exposure the battery with household garbage to avoid explosion.
Working Modes
Please press the Button to select working mode:
Press 1st time for Mode A.
Press 2nd time for Mode B.
Press 3rd time for off.
Mode A: When battery capacity >30%, lamp automatically turns on to full brightness when motion is detected within the range of ≤6mtrs and then dims to weak brightness(front light ON & back light ON) in 20 seconds of no motion. When battery capacity <30%, lamp automatically turns on to full brightness when motion is detected in the range ≤6Mtrs and then turns to weak brightness (front light OFF & back light on) in 20 seconds of no motion.
Specifications
| Power/Lumen | 4W / 500LM |
|---|---|
| LEDs | SMD2835*56PCS(Front 54PCS+Back 2PCS) |
| Beam Angle | 90° |
| Li-ion Battery | 2000mAh/3.7V, replaceable |
| Solar Panel | 2,4Wp |
| Detection Angle/Area | 120° / 2 – 6Mtrs |
| IP Degree | IP65 Waterproof |
| Warranty | 24 months(battery 12months warranty) |
| Lifespan | 35,000hrs |
| Installation Height | 2- 4Mtrs |
Features
| ZERO Electricity Cost
---|---
| PIR Detective
| IP65 Waterproof
| Super Bright
| Solar Powered
| Light on/off automatically
| Cordless
| Multi-functional
DECLARATION OF CONFORMITY
Confinity NV, Dorp 16, 9830, Sint-Martens-Latem, Belgium
declares the following device in sole responsibility:
Brand name: Hortensus
Product type: Hortensus butterfly solar lamp 4W
Item number: HOR-BSL4W
Complies with the following harmonization rules:
EN IEC 55015:2019+A11:2020
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN 61547:2009
EN IEC 60598-2-1:2021
EN IEC 60598-1:2021
EN IEC 62493:2015
EN IEC 62031:2020
Signed for and on behalf of:
Sint-Martens-Latem, Belgium – MARCH 2023
A. Pappijn – Product Manager