Rolgno B87 Head Torch Rechargeable User Manual
- May 15, 2024
- Rolgno
Table of Contents
Rolgno B87 Head Torch Rechargeable
Product Information
Specifications:
- Product Name: Portable Multifunctional Headlamp
- Model: B87
- Battery Type: Polymer lithium battery
- Battery Capacity: 2000mAh
- Light Source: 3 XTE white light + 2 2835 patch red light
- Brightness: 20-400Lm
- Color Temperature: 6000-6500K
- Battery Life: 4 hours in strong light mode, 15 hours in low light mode
- Charging Input: 5V/1A
- Focus: Fixed focus
- Material: ABS+Aluminium
- Dimensions: 61.544.543.5 mm
- Weight: About 96g
- Operating Temperature: -25°C to 50°C
- Waterproof Rating: IPX4
- Charging Method: Type-C charging
- Charging Time: 3-4 hours
Product Usage Instructions
Package List:
- Headlamp
- Bag
- Instructions
- Type-C charging cable
How to Charge:
- This product uses a Type-C charging interface for charging.
- The charging indicator light of the product flashes with three green beads during charging, and the fully charged indicator light stops flashing and remains on.
- Please be sure to use the factory-compatible charging cable for charging.
- Please place the charging device out of reach of children to avoid non-standard charging and potential safety hazards.
Operation of Lighting Modes:
Power button: Click the button within 5 seconds to cycle through the following lighting modes:
- A1: White Light – High Brightness
- A2: White Light – Middle Brightness
- A3: White Light – Low Brightness
- A4: White Light Flashing
- A5: Red Light
- A6: Red Light Flashing
- A7: Off
Sensor switch:
Click the button to turn on the induction mode, and click again to turn it
off. The induction mode can only be activated when the normal mode is turned
on, and the induction switch only has the functions of turning on and off
induction.
FAQ
-
Q: What is the battery life of the headlamp?
A: The headlamp has a battery life of 4 hours in strong light mode and 15 hours in low light mode. -
Q: What is the waterproof rating of the headlamp?
A: The headlamp has a waterproof rating of IPX4, which means it is resistant to splashing water from any direction. -
Q: How long does it take to fully charge the headlamp?
A: It takes approximately 3-4 hours to fully charge the headlamp.
Overview
Portable multifunctional headlamp
Specification Information
The above data is from laboratory testing, and there may be slight errors when used in different environments.
Product Diagram
Package List
How To Charge
- This product uses a Type-C charging interface for charging.
- The charging indicator light of the product flashes with three green beads during charging, and the fully charged indicator light stops flashing and remains on.
- Please be sure to use the factory-compatible charging cable for charging.
- Please place the charging device out of reach of children to avoid non-standard charging and potential safety hazards.
Operation Of Lighting Modes
- Power button: Click the button operated within 5 seconds), and the sequence is: A1 (White Light-High Brightness); A2 (White Light-Middle Brightness); A3(White LightLow Brightness); A4 (White Light Flashing); A5 (Red Light); A6 (Red Light Flashing); A7 closed.
- Sensor switch: Click the button to turn on induction mode, and click again to turn it off. The induction mode can only be activated when the normal mode is turned on, and the induction switch only has the functions of turning on and off induction.
- To switch modes in the state, click on the power button.
- Each of the above gears has a memory function (the memory function is activated while opening the gear, without waiting for time). Press and hold the 2S conventional button, the product will close, and open it again to return to the gear before closing.
- If you have any questions about the product, please feel free to contact us at any time.
Note
- Do not use this lamp in extremely cold (25°C below zero) or hot (above 50°C) environments.
- The product uses a rechargeable lithium battery. Please charge according to the requirements. Improper charging methods will lead to battery damage, even short circuits, fire, or explosion.
Maintenance
- Do not rub the product against other hard objects for its wear may affect light transmission.
- It is prohibited to throw and hit the lamps at will during use to prevent damage to the lamps.
Notices:
- Please fully charge the lamp before placing it for a long time to prevent over-discharge and damage of the battery caused by self-discharge of the lamp.
- Please read through the instructions before using the lamp to learn its proper use and maintenance.
- Children shall be supervised and guided by adults while using the lamp.
- As the light of the lamp is too strong, please do not shine on the human eye. The bright light will cause blurred vision for a short time, especially for children.
- Do not disassemble this product by yourself.
- Do not modify this product by yourself.
FCC Compliance Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.