Rolgno Z1 Magnetic LED Wall Sconces User Manual

June 16, 2024
Rolgno

Rolgno Z1 Magnetic LED Wall Sconces

Product Name: Magnetic LED Wall Sconces

Product parameters

  1. Battery: 3.7V 2000mAh lithium battery
  2. Charging Interface: 5V/1A TYPE-C
  3. Lighting angle can be adjusted 360 degrees
  4. Fixed base with glue/screws

Functions

  1. Lighting, can be used as a night light, reading light, outdoor light, flashlight, photo light, etc.
  2. Timing and remote control function.
  3. The light has 3 color temperatures + 4 levels of brightness that can be adjusted.
  4. With the memory function, the light will display the same color temperature and revert to the lowest brightness level when turned on again.

Installation Steps

  1. Take out the base and fix it in the desired location using glue or wall nails. If using glue, first fix the glue to the base.
  2. Attach the light magnetically to the base and adjust it according to the lighting direction you need.

Installation Steps
Note: If using glue, please ensure that the wall surface is clean and flat before applying the adhesive.

  1. It can also be used directly on a desktop.

How to Use the Lamp

  1. Press the button to turn it on.
  2. Short Press: cycle through low brightness, medium brightness, high brightness, super brightness, and off.
  3. Long press for 3 seconds to cycle through cool light, warm light and natural light.”

How to use the remote control

Specific Instructions

Button 1 : Press once to turn on the light, and press again to turn off the light.
Button 2 : Every time you press the button, the light color will change. There are a total of 3 color temperature buttons.
Button 3: Touch the wall light switch button. After turning on the wall light, press and hold the Mate button for 6 seconds until the light goes out to complete the remote control synchronization. One remote control can control multiple wall lights at the same time.
Button 4: Decrease brightness.
Button 5: One-click return to cool light color temperature.
Button 6 :Increase brightness.
Button 7-9: Timer function. You can choose 60/120/180 minutes timing. After pressing, the light will turn off automatically at the corresponding time.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals