avantalk Clan K2 Wireless Earbuds For Kids User Manual
- May 15, 2024
- Avantalk
Table of Contents
avantalk Clan K2 Wireless Earbuds For Kids User Manual
Product Overview
LED Charging Indicators
Use with Cellphone
When first removed from the charging case, the earbuds will enter pairing mode
automatically(LED will flash BLUE and RED). Select “Avantalk Clan K2” or
“Avantalk Clan A2” in your phone’s Bluetooth menu.
NOTE: The earbuds does not have a manual pairing mode. If you want to pair a different device, you need to disconnect from the currently paired device in order to enter the earbuds into pairing mode.
Charging
To charge the earbuds:
To charge the case:
The LED on the case will flash red when out of battery. Connect the case to a
5V/500Ma-2A rated USB charger or a PC USB port to charge.
Subsequent Use
For subsequent use, your earbuds should automatically reconnect to the last- paired device within a few seconds when taken out of the case. If not, select “Avantalk Clan K2” or “Avantalk Clan A2” in your device’s Bluetooth menu.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance coldvoid the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class Digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with theinstructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver disconnected.
- Consult the dealer or an experienced radio/TV technician for help.
Contact Us
Support Tickets
avantalk.com/submit-a-ticket
Support Email : support@avantalk.com
Support Numbers
| US | +1 800 232 2078 | 9am-6pm PST | Mon-Fri |
|---|---|---|---|
| CA | +1 800 232 2078 | 9am-6pm PST | Mon-Fri |
| UK | +44 208 068 2023 | 9am-6pm PST | Mon-Sat |
| DE | +49 322 2109 7297 | 9am-6pm GMT | Mon-Sat |
| FR | +33 17 634 0312 | 11am-9pm CET | Mon-Sat |
| IT | +39 069 4803 330 | 9am-6pm CET | Mon-Sat |
| ES | +34 93 1786 261 | 9am-6pm CET | Mon-Sat |
| AU | +61 2 8310 9897 | 11am-7pm AEST | Mon-Fri |
FAQhttp://avantalk.com/support/clan-k2′
Product Registration See QR code on the product
Manufacturer:
Avantronics Limited
Luohu District, Shenzhen 518000 China
+ 86 755 8228 5022 support@avantalk.com
US Importer:
Avantree Corporation
San Jose, California 95119 USA
+1 800 232 2078 support@avantalk.com
UK Importer:
Avantree Limited
Watford, WD180 0HQ UK
+44 20 8068 2023 support@avantalk.com
Servicer in Europe:
Gizmex GmbH, Sternstr. 67, 40479 Dusseldorf, Germany
+49 322 2109 7297 support@avantalk.com
Model No: ATBH-TW24
Dispose of the packaging and this product in
accordance with the latest provisions.
Z-PKQG-TW24-V0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>