Geek Smart L-B202 Fingerprint Door Lock with Bluetooth User Manual
- June 4, 2024
- Geek Smart
Table of Contents
Geek Smart L-B202 Fingerprint Door Lock with Bluetooth
Welcome
GeekSmart bids you welcome to a world of smart home devices, smart locks, and
smart surveillance. We at GeekSmart strive to explore and develop the the
smart home industry for the good of all. We combine bridge cutting-edge
technologies to develop products fit and ready for the market. Please visit
our website www.geektechnology.com
Before installing, please scan the QR codes to watch our easy step-by-step
installation video. If you have questions regarding the installation process
please contact us by mail
customercare@geektechnology.com or by phone
1-844-801-8880/(862)352-0406.
Scan the QR code for more assistance and support
Important Notes
- Do not use the power drill for installation.
- Please read all the instructions before contacting customer support.
- User, as mentioned below, may have problems using our fingerprint reader:
- Users under seven years old or over eighty years old.
- Fingerprint indistinct.
- Do use our latch in our box,or else it will cause our lock not work.
- If you have a new door, please drill the holes according to Drill Template, you can visit our website which can help you finish the installation with videos.
Please contact customer support before returning the product to the store.
- Any fingerprints can unlock GeekSmart L-B202 in Factory Default Mode.
FCC
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
fora Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.his equipment generates uses and
can radiate radio frequency energy and, ir not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there IS no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/IV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Product Description
Preparing For Installation
Include in the box
Check the door’ s dimensions
- Step 1 : Measure to confirm that the door is between! 3/8″~2″(35mm~50mm) thick
- Step 2 : Measure to confirm that the hole in the door is 2″(50mm)
- Step 3 : Measure to confirm that the backset is either 2%11~2¾11 (60~ 70mm)
- Step 4 : Measure to confirm that the hole in the door edge is 1″ (25 mm)
NOTE : If you have a new door, please drill the holes according to Drill
Template
Installing Latch and Strike Plate
- Install latch into the door, Make sure latch fit for inside opnerningor outside the opening door.
- Install the strike into the door frame, and make sure the latch can go into the strike smoothly
The installtion of the battery
- Disassembly of battery cover by a screwdriver.
- Insert 4* AAA batteries according to the positive and negative poles.
- Install the battery cover, and secure it with the screw.
Installing Exterior Handle
Remember to attach a rubber gasket to the handle before insertion.
Installing Interior Handle
- Connect two cables,one from the inside spindle of the exterior handle,one from the interior handle
- Insert interior handle into door, secure it using screws B into the exterior handle.
- Use the rubber plug cover the screw.
Important check your lock After installation.
Before activate your APP make sure that your lock has been installed properly.
- Touch the lock’s fingerprint reader,The law will remind you to add the master’s fingerprint.
- Close the door and check if the latch can go smoothly into the strike plate
- Close the door and check if the latch properly inserts into the strike plate on the door frame.
App operation guide
App Download Instructions
- Scan the QR code to the right, you can use Android and IOS to download the APP.
- Android version software can be downloaded in the Google Play store. Search “GeekSmart”.
- iOS version of the software can be downloaded in the iPhone App Store. Search “GeekSmart”.
Adding new Door Lock by app.(Note: You should stand close to the door
lock)
-
(DClick “Add device”
-
Select the lock.
-
Select lock L-B202.
-
Turn on Bluetooth.
-
Touch the fingerprint reader
-
Select your lock
Fingerprint management
- Note: please click”+” symbol on the upper right corner to add a fingerprint
- Input fingerprint account name and action time
- Scan fingerprint into the system
After the enrollment of the administrator into the APP.The administrator will have the top Management right in the lock and the system. The administrator can add the user fingerprint and set their valid time. Even the administrator can delete any user fingerprinting. And check all the records of the unlock record for the system.
Users management
- Please click”+” in the right upper corner to add new user
- Choose access schedule for these users
- Admin can see and manage all user.
Adm ins can send Ekeys to emails. The receiver needs to download the GeekSmart
app and log in to use the Ekey.
Administrators can manage all users, delete Limited time user or Permanent
user and view unlock records.
Specifications
Troubleshooting
-
Q: After the door lock is installed, there is no response or abnormal behaviour.
A: Please check as follows:- Check the battery installaton direction and make sure that the battery has suffcient power.
- Make sure the battery cover is in place.
-
Q: What prompt will i receive when the battery is low?
-
Low power, there will be a voice reminder when unlocking, and the power can be viewed in the APP vdoor lock setting interface.
-
The remaining power can be provided about 50 times to unlock, please replace battery in time
-
-
Q: What should I do if the battery is totally dead?
A: There is a microUSB port at the head of the front handle. You can use this interface to temporarily power
the door lock through a power bank etc. -
Q: I can’t fit the battery cover in place.
A: Please check as follows:- Check the battery pole orientation.
- Check the cable from inside spindle of exterior handle with interior handle
-
Q: I lost my phone, how to reset the door lock as soon as possible for safety?
A: In this case, we recommend that you perform a factory reset and set a new administrator. -
Q: The fingerprint recognition success rate is different from what the manual says.
- When entering the fingerprint, please try to move the position of the fingertip slightly every time you enter the fingerprint, so that you can enter a larger fingerprint area. Please try to cover areas that are frequently used.
- Fingers are too dry, wet, oily or dirty.
- There is direct sunlight on the sensor.
Lock Operation
Use a microfiber cloth and wipe across the fingerprint reader surface.
NOTE: THE FIRST 2 FINGERPRINTS ADDED ARE ADMINISTRATOR.When 2admin- userfingerprints have been collected, adding new fingerprints will prompt normal-user fingerprint collection.
Delete all fingerprints (Factory Reset)
Use Reset Needle to hold press the setting button on the interior handle for 9-lOseconds. After prompting “initialization success” the lock has been reset and ALL FINGERPRINTS (INCLUDING ADM INS).
Geektechnology Ltd. 120 Route 46 West, Parsippany, NJ 07054.
Toll Free 1-844-801-8880
(862)352-0406
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>