PHILIPS WL140V LED34S CoreLine Wall Mounted Light Instructions
- May 15, 2024
- Philips
Table of Contents
PHILIPS WL140V LED34S CoreLine Wall Mounted Light
Specifications
-
Product: CoreLine Wallmounted WL140V
LED34S/830 PSED ELB3 WH -
Power: 38.5 W
-
Dimensions: D390 mm
-
Luminous Flux: 3,350 lm
-
Color Temperature: 3000 K
-
Emergency Lighting: DALI, IP65, ELB3h/EL-DC
Product Usage Instructions
Lighting
The CoreLine Wallmounted WL140V LED34S/830 PSED ELB3 WH is a high-performance wall-mounted luminaire suitable for various indoor and outdoor lighting applications. Follow these steps for proper usage:
Installation
- Ensure the power supply is switched off before installation.
- Mount the luminaire securely on the wall using appropriate fixtures.
- Connect the luminaire to the power source as per the provided wiring diagram.
Operation
To operate the luminaire:
- Switch on the power supply.
- Use the dimmable feature if desired for adjusting the light intensity.
Maintenance
Regularly clean the luminaire and check for any signs of damage. Replace the light source when necessary following the provided instructions.
FAQ
Is the CoreLine Wallmounted luminaire suitable for outdoor use?
Yes, the luminaire is IP65 rated, making it dust and jetproof, suitable for outdoor applications.
Can the light intensity be adjusted?
Yes, the luminaire is dimmable, allowing users to adjust the light intensity as needed.
CoreLine Wall- mounted
WL140V LED34S/830 PSED ELB3 WH
CoreLine Wall-mounted, 38.5 W, D390 mm, 3350 lm, 3000 K, DALI, IP65, ELB3h/EL-
DC
CoreLine wall-mounted solutions deliver on the CoreLine promise of innovative,
easy-to install and high quality luminaires. These circular-shaped, surface-
mounted luminaires are suitable for both ceiling and wall installations and
are easy to apply in circulation areas such as corridors, hallways and
staircases. The modern, unobtrusive design, combined with a homogeneous light
distribution, ensures this luminaire will blend into the architecture of most
buildings. And thanks to the push-in connectors, installation of the CoreLine
WL140V is fast and straightforward. This family includes Interact ready
luminaires with integrated wireless communications, ready for use with
Interact gateways, sensors and software.
Product data
Product data|
---|---
General Information| | | Glow-wire test| Temperature 850
°C, duration 30 s
Light source replaceable| No| | EU RoHS compliant| Yes
Number of gear units| 1 unit| | |
Driver included| Yes| | Light Technical|
Product family code| WL140V [Coreline Gen3 Wall Luminaire]| |
Luminous Flux| 3,350 lm
Lighting Technology| LED| | Saturated Red (R9)| <50
Type of emergency lighting battery| Lithium| |
Correlated Color Temperature (Nom)| 3000 K
Value ladder| Performance| | Luminous Efficacy (rated) (Nom)| 87
lm/W
CE mark| Yes| | Color rendering index (CRI)| >80
Warranty period| 5 years| | Flickering value (PstLM)
– Flickering value as| 1
Flammability mark| –| | per EN 61000-3-3|
ENEC mark| –| | Stroboscopic effect visibility measure
(SVM)| 1.6
Beam angle of light source| 120 degree(s)| | Power
consumption during Central DC| 3 W
---|---|---|---|---
Light source color| 830 warm white| | emergency mode|
Optic type| Symmetrical| | |
Luminaire light beam spread| 120° x 120°| | Approval and
Application|
Unified glare rating CEN| 25| | Ingress protection code| IP65
[Dust penetration-protected, jet-
| | | | proof]
Operating and Electrical| | | Mech. impact
protection code| IK10 [20 J vandal-resistant]
Input Voltage| 220-240 V| | Sustainability rating| –
Line Frequency| 50 or 60 Hz| | Protection class IEC|
Safety class II
Initial CLO power consumption| – W| | Photobiological risk|
Photobiological risk group 0 @200mm
Average CLO power consumption| – W| | | to EN62778
Inrush current| 18 A| | Photobiological risk
specification| 0.2 m
Inrush time| 0.025 ms| | |
Power Consumption| 38.5 W| | Initial Performance (IEC
Compliant)|
Power Factor (Fraction)| 0.9| | Luminous flux
tolerance| +/-10%
Connection| Push-in connector 6-pole| | Initial chromaticity|
(0.4338,0.4030) SDCM <3
Cable| –| | Power consumption tolerance| +/-10%
Number of products on MCB of 16 A type
B| 34| | |
| | | Over Time Performance (IEC Compliant)|
Temperature| | | Control gear failure rate at median useful
life| 5 %
Ambient temperature range| 0 to +25 °C| | 50000 h|
| | | |
| | | Lumen maintenance at median useful **life*| 80
Controls and Dimming| | | 50000 h|
| | | |
Dimmable| Yes| | |
Driver/power unit/transformer| Power supply unit with DALI interface,| |
Application Conditions|
| DC compatible for central emergency| | Performance ambient
temperature Tq| 25 °C
| lighting (integrated)| | Maximum dim level| 1%
Control interface| DALI| | Suitable for random
switching| No
Constant light output| No| | |
| | | Product Data|
Mechanical and Housing| | | Order product name| WL140V
LED34S/830 PSED ELB3 WH
Housing Material| Polycarbonate| | Full product name|
WL140V LED34S/830 PSED ELB3 WH
Reflector material| Polycarbonate| | Full product code|
871869997872300
Optic material| Polycarbonate| | Order code| 910505101558
Optical cover material| Polycarbonate| | Material Nr.
(12NC)| 910505101558
Fixation material| –| | Numerator – Quantity Per
Pack| 1
Housing Color| White| | EAN/UPC – Product/Case| 8718699978723
Optical cover finish| Opal| | Numerator – Packs
per outer box| 1
Overall height| 85 mm| | EAN/UPC – Case| 8718699978723
Overall diameter| 390 mm| | |
| | | |
Emergency Operation| | | |
Emergency flux**| 350 lm| | |
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, March 11 – data subject to change