termichy Space Saving Bottle Drying Rack Instruction Manual

Table of Contents

Keep baby bottles and pump accessories high and dry.

Check all components to confirm the items in the package.
Wash the product before first use with warm soapy water, rinse thoroughly.
Place tray on a flat surface.
Insert drain board into the tray.
Insert all rods into their respective holes.
Maintaining bottles, baby teats and other accessories high and dry will help keep them clean.
Periodically washing the product will help maintain its cleanliness.

Note:

Do not microwave, boil or steam this drying rack, avoid damage to the product.
Please check the product before each use. If there is any damage, please replace it in time.
Make sure all accessories are properly connected before each use.
Do not get close to the fire.
Please keep it in a safe place where children do not reach it.
Washing thoroughly before initial use and periodically.
Dishwasher safe, but not over 80 degrees Celsius.

termichy-Space-Saving-Bottle-Drying-Rack-fig-1

Children’s Safety

 Keep the product away from children to avoid accidents.

Heat Resistance

 Do not expose the product to high temperatures, such as a microwave, sterilizer, or dishwasher.

Cleaning

 Do not use rough sponges or brushes, as they might damage the product.

Disposal

 Dispose of the product according to local regulations when it is no longer usable.

Insert the draining board into the tray ensuring that it fits securely in place.
Align the five supporting rods with the corresponding holes in the draining board and press until each rod is firmly in place.
Once assembled, the rack should be stable and ready to hold bottles and accessories.

termichy-Space-Saving-Bottle-Drying-Rack-fig-2