Forlim KDL-546-L Electric Grinder User Manual
- May 15, 2024
- Forlim
Table of Contents
Forlim KDL-546-L Electric Grinder
Thank you for purchasing the electric grinder.
BEFORE USING FOR THE FIRST TIME
To ensure safety and maintain the high quality of the product, we recommend that you read and follow the instructions carefully.
- Do not immerse the appliance in water or any other liquid to avoid harm to humans or the product.
- Use for pepper and salt only, please do not use for other purposes.
- Do not force the grinder to tighten or twist it, or attempt to speed up the mechanism.
- Keep body parts (e.g.fingers) and utensils away from the grinding head to avoid injury. Please hold the grinder tightly when using it.
- Keep this product away from children.
- Do not dismantle the product by yourself; Otherwise, the warranty will be invalid.
- If you are not using the grinder for a long time, please remove the batteries.
- Keep away from flammable, explosive gas, and high-temperature environments.
PRODUCT SPECIFICATION
- Product Name: KDL-546-LElectric Grinder Set
- Model: KDL-546-L
- Rated voltage/power: 9V / 3.6W
- Operating noise: <72dB
- Main material: stainless steel, Acrylic, ABS (acrylonitrile, butadiene, styrene)
- Product Size: 6363242mm
- Place of origin: China
Note
Product specifications may vary slightly due to different measurement methods,
subject to the actual product.
PRODUCT DESCRIPTION
- Grinder Knob
- Mill Top Cover
- Motor Section
- Battery compartment (Batteries not included)
- Container
- Built-in LED Light
HOW TO INSTALL THE BATTERIES
- Unscrew the upper cap in an anti-clockwise direction and remove it from the body
- Install 6 AAA batteries into the battery compartment as shown.
- Put the upper cap back on the body and turn it to fix in a clockwise direction.
HOW TO USE
- Unscrew the lower part of the transparent container in a clockwise direction and remove it from the body.
- Put pepper or salt into the container, attach and lock the upper body and container by rotating it in reverse.
- Use the adjuster to adjust the grind size according to your preference.
- Turn the mill upside down to start grinding.
This product features an adjustment knob that can be rotated multiple times between the finest and coarsest settings.
- To Adjust to a Fine Grind: Rotate the adjuster from “COARSE to “FINE”. Continue rotating for a few circles until the desired fineness is achieved.
To Adjust to a Coarse Grind: Rotate the adjuster from “FINE” to “COARSE”. If the adjuster becomes loose, it may be due to pepper grains stuck in the burr. Simply rotate the grinder for 1 second to loosen the burr and then continue adjusting. This is a normal occurrence with ceramic burrs and will not affect its normal use. If the adjuster falls off, please assemble the components in the orders shown below.
TROUBLESHOOTING
- To Adjust to a Coarse Grind: Rotate the adjuster from “FINE” to “COARSE”. If the adjuster becomes loose, it may be due to pepper grains stuck in the burr. Simply rotate the grinder for 1 second to loosen the burr and then continue adjusting. This is a normal occurrence with ceramic burrs and will not affect its normal use.
- If the adjuster falls off, please assemble the components in the orders shown below.
- If the grinder does not work or stops while grinding:
- Please check that the batteries are alkaline.
- Please check that the batteries are installed correctly.
- Please confirm that there is sufficient battery power.
- Please adjust the adjuster in a counter-clockwise direction.
- If the above steps are all correct and the grinder still does not work properly, please contact the vendor for maintenance service.
NINGBO KAIDELI ELECTRIC CO., LTD.
Address: Binhai Industrial Zone, Xidian Town, Ninghai,
Zhejiang, 345613 China
Post-sale service: [email protected]