Gardner Engineering Limited TBC11 Multi Slot Camera Disc Instruction Manual
- May 15, 2024
- Gardner Engineering Limited
Table of Contents
Gardner Engineering Limited TBC11 Multi Slot Camera Disc
Align your camera on the disc to check the most suitable disc for your installation. Please print in A4 at 100% Print for accurate results.
Notes
All Tolerances +/- 0.5% unless otherwise
Statated
All Measurements are Raw Materials Only and allowances are needed for Welding
Tracks & any additional coatings such as Powder Coating / Spray Paints Etc.
Gardner Engineering Limited (GE) makes no representation or warranties,
express or implied, concerning the reuse of the data provided herewith,
regardless of its format or the means of its transmission. We make every
effort to ensure accurate information, however, there is no guarantee or
representation to the user as to the accuracy, currency, suitability or
reliability of this data. The user assumes all risks associated with its use.
GE assumes no responsibility for actual or consequential damage incurred as a
result of any user’s reliance on this data.
Align your camera on the disc to check the most suitable disc for your installation
Notes
All Tolerances +/- 0.5% unless otherwise
Statated
All Measurements are Raw Materials Only and allowances are needed for Welding
Tracks & any additional coatings such as Powder.
Coating / Spray Paints Etc
Gardner Engineering Limited (GE) makes no representation or warranties, express or implied, concerning the reuse of the data provided herewith, regardless of its format or the means of its transmission. We make every effort to ensure accurate information, however, there is no guarantee or representation to the user as to the accuracy, currency, suitability or reliability of this data. The user assumes all risks associated with its use. GE assumes no responsibility for actual or consequential damage incurred as a result of any user’s reliance on this data.
Align your camera on the disc to check the most suitable disc for your installation
Please print in A4 at 100% Print for accurate results
Notes
All Tolerances +/- 0.5% unless otherwise
Statated
All Measurements are Raw Materials Only and allowances are needed for Welding
Tracks & any additional coatings such as Powder.
Coating / Spray Paints Etc
Gardner Engineering Limited (GE) makes no representation or warranties, express or implied, concerning the reuse of the data provided herewith, regardless of its format or the means of its transmission. We make every effort to ensure accurate information, however, there is no guarantee or representation to the user as to the accuracy, currency, suitability or reliability of this data. The user assumes all risks associated with its use. GE assumes no responsibility for actual or consequential damage incurred as a result of any user’s reliance on this data.
Align your camera on the disc to check the most suitable disc for your installation
Please print in A4 at 100% Print for accurate results
Notes
All Tolerances +/- 0.5% unless otherwise
Statated
All Measurements are Raw Materials Only and allowances are needed for Welding
Tracks & any additional coatings such as Powder.
Coating / Spray Paints Etc
Gardner Engineering Limited (GE) makes no representation or warranties, express or implied, for the reuse of the data provided herewith, regardless of its format or the means of its transmission. We make every effort to ensure accurate information, however, there is no guarantee or representation to the user as to the accuracy, currency, suitability or reliability of this data. The user assumes all risks associated with its use. GE assumes no responsibility for actual or consequential damage incurred as a result of any user’s reliance on this data.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>