PHILIPS SM350C KeyLine Suspended Lighting Instruction Manual

PHILIPS SM350C KeyLine Suspended Lighting Instruction Manual

ASSEMBLY INSTRUCTION

Family| Family code| Light source| (Dimensions ( mm )|
---|---|---|---|---
name| | class| A1/A2| B| C| D min| D max
| SM350C L600| | _562 568| 70| 70| 300| 360| 1,380_ 1,512
KeyLine| SM350C L1200| D| _1122_ 1128| 70| 70| 800| 920| 2,560 2,780
| SM350C L1500| | _1402_ 1408| 70| 70| 1000| 1200| 3,1483,423

SM350C

Light line

L-corner

Accessories| | | | | | | | | 0,75mm2
| | |
---|---|---|---|---|---|---|---|---|---|---|---|---
SP350Z EP WH| –| –| –| –| –| 4| –| –| –| –| 2| –
SP350Z EP BK| –| –| –| –| –| 4| –| –| –| –| 2| –
SP350Z EP SI| –| –| –| –| –| 4| –| –| –| –| 2| –
SP350Z CPSP350Z CMB SP350Z SM2 WH| — 1| — 1| — 1| –2| –2| —| 6–| 1–| —| -22| —| –2
SP350Z SM2 SISP350Z SW2| 1-| 1-| 12| 22| 22| —| —| —| —| 22| —| 22
SP350Z C1700P3 SI| –| –| –| –| –| –| –| –| 1| –| –| –
SP350Z C1700P5 SI| –| –| –| –| –| –| –| –| 1| –| –| –

Suspended

SP350Z SM2 WH
SP350Z SM2 SI
SP350Z SW2
SP350Z C1700P3 SI
SP350Z C1700P5 SI
SP350Z EP WH
SP350Z EP BK
SP350Z EP SI

1. a

2. a

SP350Z SM2 WH
SP350Z SM2 SI

3. 4. 5. 
4. 
5. 
6. 
7. 
8. 
9. 
10. 
11. min. 5×0.5mm 2
    max. 5×2.5mm 2
    BROWN
    GREEN/YELLOW
    BLUE
    BLACK
    GRAY
    
    a. **PSUWIA

b. PSD

**

14. 15. PSUWIA
        
        PSD
        
        Looping (Outside & Inside)
        

15. 

16. 

17. 

18. Start/end line
    SP350Z EP WH
    SP350Z EP BK
    SP350Z EP SI
    

19. SP350Z SM2 WH
    SP350Z SM2 SI

20. SP350Z SM2 WH
    SP350Z SM2 SI

Installation Instruction

1. Suspend line
   

2. Start/end line
   SP350Z EP WH
   SP350Z EP BK
   SP350Z EP SI
   
   Endcap mounting

3. Coupling bracket
   SP350Z CP
   

4. 

5. 

6. 7. Electrical connection
      See pages 3-4
      Points 13-16
      

7. 

Surface-mounted

1. Electrical connection
   See pages 3-4

2. Points 13-16
   

3. 

4. Electrical connection
   See pages 3-4
   Points 13-16

L-corner

**DO NOT OPEN THE LUMINARY!

After installation remove protective insert
**

1. 

2. 

3. a.OK
   
   

4. b.
   

5. Electrical connection
   See pages 3-4
   Points 13-16

Inrush current

ELECTRICAL CHARACTERISTICS

Maintenance instructions

To assure the lighting quality of this unique LED lighting concept there are a few instructions regarding the maintenance of this LED luminary:

• Do not touch electronic components!
  Electronic components are under high voltage.
  Electronic components are ESD sensitive.

• During installation or when maintaining the luminary please use static free gloves to avoid marks on the luminary.

• To remove dirt and spots use the following:

  • Dust: only use micro fiber cloths
  • Fingerprints, etc.: use a cleaner for synthetic materials with anti static properties.

• Do not stare into the LED light beam.

• To avoid scratches and dirt on optical parts remove protective foil after installation.

• The luminary shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.

• The lighthouse in not replaceable. In case of damage replace the luminary.

• Driver insulation: Basic according to IEC 61847-1

ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES

Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control conductors

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>