LTC Networking Limited RGB Gaming Mouse User Guide

May 15, 2024
LTC Networking Limited

LTC Networking Limited RGB Gaming Mouse

LTC-Networking-Limited-RGB-Gaming-Mouse-product

Product Specifications

  • Model: GM-022
  • Connection Modes: Wired, 2.4G, Bluetooth (BT)
  • Charging: via Charging Base
  • DPI Loop: Adjustable
  • Power Switch: On/Off
  • Charging Base Light Switch: On/Off

Product Usage Instructions

Key Map

  • Left Key: Function 01
  • Right Key: Function 02
  • Scroll: Function 03
  • Forward: Function 04
  • Backward: Function 05
  • DPI Loop: Function 06
  • Power Switch: Function 07
  • Charging Base Light Switch: Function 08

Connections

  • Wired Mode: Connect the mouse to your device using the provided cable.
  • 2.4G Mode: Insert the USB receiver into your device’s USB port for wireless connectivity.
  • BT Mode: Enable Bluetooth on your device and pair it with the mouse named GM-022.

Charging

  • Flash: Need to Charge
  • Flash: Charging
  • On: Charging Complete

FAQ (Frequently Asked Questions)

FCC Warning

  • Any changes or modifications not approved may void the user’s authority to operate the equipment.
  • This device complies with FCC Rules Part 15 and operates under specific conditions to avoid interference.

If experiencing issues, consider:

  • Reorienting or relocating the receiving antenna.
  • Increasing separation between equipment and receiver.
  • Using different electrical circuits for equipment and receiver.
  • Consulting a professional for assistance.

The device meets RF exposure requirements for portable use without restrictions.

Key Map

  1. Left Key
  2. Right Key
  3. Scroll
  4. Forward
  5. Backward
  6. DPI Loop
  7. Power Switch
  8. Charging Base Light Switch

Connections

LTC-Networking-Limited-RGB-Gaming-Mouse-fig-2

Enter Paring Mode: Press the Left/Middle/Right Key at the Same Time for 6 Seconds.

Charging

  • Flash: Need to Charge
  • Flash: Charging
  • On: Charging Complete

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals