FIRE BOLTT BSW141 Strike Smart Watch User Manual

: May 15, 2024
: FIRE-BOLTT

Table of Contents

Smart Watch
User Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Smart Watch

User Manual

Downloading and connecting of smart watch with Da Fit APP

Download and install Da Fit APP
Scan QR code with mobile phone to download APP.
For IOS system, select APP Store, search for Da Fit App.

Da Fit

Android system, select Google Play to download and install Da Fit App. Or scan QR code to download

Note: your mobile phone must support Android 5.1 or IOS 8.0 or above, and Bluetooth 4.0 or above.

Connect smart watch with Da Fit APP

Click on “Add Device” to connect the smart watch

Click on your device in the device list scanned. Connect it directly to Android system.

For both android & iOS click on Notifications Tab in the Dafit app

Successfully connected

Enable all the notifications for the ease of use

BLUETOOTH CALLING FUNCTION

This watch comes with a special feature of Bluetooth calling. The user can make calls without having to open the phone. You can also view the call history of the watch. You need to keep the connection between the watch and the phone stable when using the Phone Call function.

The watch also has a microphone and a speaker built in for the ease of talking through the watch and to hear music, phone calls, and other notifications

Follow the steps to activate the calling function and much more.

Part A – How to connect

Step 1: After connecting the watch to the Da Fit App, you will get a notification on the phone to connect to BT Calling as shown below

For iOS

Switch on the bluetooth in the phone bluetooth settings and you shall see the connected device as “ FireBoltt 141 ”

For Android

Accept the Bluetooth Pairing Request

Accept the pairing request

Step 2: Go to the watch and swipe left to the features page and locate the phone function
After successfully connecting the bluetooth you will get this screen.
Upon clicking on the Recent Call you can see the recent calls of your device
When you click on the dial pad you shall get this screen on your watch.
Once you dial the number the call button on the right corner shall appear.
You click the dial button, you can see that the number is dialing
Through the microphone available in the watch you can talk through the watch and adjust the speaker volume by clicking on the speaker icon

Part B – How to disconnect

To disconnect the bluetooth calling the user simply has to go to the phone’s bluetooth setting and “unpair” the FireBoltt 141 device

Part C – Add contacts

You can add upto 8 contacts – Add the contacts from the Dafit App. Go to “Favourite Contacts” and add contacts. The selected contacts will get synced to your watch.

FIRE BOLTT BSW141 Strike Smart - b8 Click on Favorite Contact to add the contacts

Select the contacts you want to add

The contacts will get added.

Battery

The battery lasts for 2 to 3 days with bluetooth calling mode enabled.
On standby the battery can stay for as long as 5-7days.
Advisory- To conserve battery, It is advised to turn off the bluetooth when not in use.
Charge the watch with an adapter within 3.7V to 5V

Part D – Switch between Phone / Watch

Switch Between Watch / Phone During an Active Call : If your watch is connected to the Phone via Bluetooth, all calls will come on the watch by default. If you want to change the call to the phone, during an active call, simply click on Handset earpiece icon to select it. The call will then come on your phone.

FIRE BOLTT BSW141 Strike Smart - c1

The screen can be navigated by sliding left/right or sliding up/down

FIRE BOLTT BSW141 Strike Smart - c2

Control Center
Swipe Down
Swipe UP
Swipe Left
Swipe Right
Feature Pages
Message
Smart Menu

Watch Face Functions Navigation and Button Instructions

The watch features a full touch control screen with a reflective display and a button

Functions Navigation

The screen can be navigated by sliding left/right or sliding up/down

By default, the watch face page displays, and on the watch face page, you can:

Slide down to view control centre.

• Phone
• Menu View
• Brightness
• Flashlight
• E-Card
• Settings

Slide up to view Messages
Slide right to view Smart Menu
Slide left to view features like Activity, Sleep, Heart Rate, SpO2, Weather, you can add or delete any component

Touch Button Operations

Short press from the side button

To unlock the screen in the lock screen status
To return to the watch face page from the first-level menu entry in the unlocked status

Long press from the side button

To turn on the watch in the power off status

Watch Wearing and Charging

It is recommended to wear the watch with a moderate tightness at a distance two fingers far from your wrist to ensure that the optical heart rate monitor works properly

Charging

Plug the charger’s USB port into a mobile phone charger or a computer USB port to charge the watch.
Attach the charging pin to charge the smart watch.
The charging icon will appear on the screen, indicating that the watch is being charged.
It is recommended to use computer USB ports or brand mobile phone chargers to charge the watch.

Use of Functions

The watch has a lot of functions, these can be accessed by swiping up to the list menu. Menu consist of – Activity, Sleep, Heart Rate, Phone Call, Exercise, Workout Records, SpO2, Weater, Messages, Shutter, Player, AI Voice, Settings, More (Timer, Alarm, Stopwatch, Cycle Tracking, Flashlight, Find Phone)

Activity – The watch automatically tracks the step taken on the screen. Note: Your movement stats reset to 0 at midnight.
Sleep – You need to wear the watch while sleeping, it will provide the hours slept and quality of sleep stats.
Note: Sleep stats reset to 0 at 8 pm
Heart Rate – The watch will record your heart rate all day. You can also tap on the page to start measuring
AI Voice – Activate your mobile phone’s AI Voice through this watch
Oxygen Tracking (SPO2) – Tap the SPO2 page to start measuring. On the SPO2 page you can see the previous data
Phone Call – The watch supports bluetooth calling, under this option you can dial the number, view call logs & contact
Cycle Tracking – You can track your mensus cycles on the watch itself
App QR – Scan this with your phone to download the App and bind the watch
Exercise – This feature comprises of multiple exercise modes. Track your fitness goals in a tap.
Exercise Record – Record all the exercises in on go to view a detailed analysis
Alarm – You can set 3 alarm on the watch
Weather – You can know the current weather and the forecast for tomorrow, this information is synced from your app. Scroll Up to see the forecast weather. It will not be updated if the phone is disconnected for a long time.
Shutter – You can remote control the camera of your phone once the watch is connected with your device.
Player – You can remote control the music player of your phone once the watch is connected to the device
Messages – You can view all your messages and notifications under this function
Find Phone – When the watch is connected to the phone via App you can find the phone through the watch
Flashlight – No need to be afraid of the dark, turn on the flashlight of the watch
Stopwatch – You can record your time and always be on time with any task
Timer – Set realistic goals and achieve them
Setting – Check out other features through this tab.

Other Settings

Watch Face

Replace the Watch Face on the Watch:

Long Press the screen, you shall get the options to change the watch face, scroll left and click on the watch face you want to select. The watch face will set.

Replace the Watch Face on the App:
Tap the Watch face settings entry in the “Profile” -> “FireBoltt 141” page, and then download and sync watch faces on the Watch Face Store. After that, the replacement is done

Weather

In the weather page, you can view the weather for the day and the weather information for the next day.
The weather displayed by the watch comes from the server.
Therefore, you need to keep the Bluetooth of your mobile phone on and connect it with the watch to keep abreast of the latest weather information changes.
In addition, when a weather alert is received, the watch will receive the alert as well. You may toggle on the weather alert switch in the “Profile” -> “FireBoltt 141″ -> ” Weather settings ” page on the Da Fit App

Notifications

Enable Notifications

During use, you need to enable the corresponding “App alerts” on the Da Fit App, and keep the watch and the mobile phone connected.
If you are using an iOS device, you need to pair the watch with the Bluetooth of the mobile phone before use.

If you are using an Android device, you need to include the App into the whitelist or self-starting list of the mobile phone in background settings and keep the App running in the background to protect it from being detected and killed by the mobile phone’s background processes. Such background processes could disconnect the watch and the App, and as a result no reminder will be received. See “Profile” -> “FireBoltt 141” – > “Run in background” settings for different mobile phone systems

View Notifications

When the watch receives a notification alert, it will automatically display the notification content. If you do not view the notification immediately, you may slide up in the watch face page to go to messages and check the notification

Watch Status Reminder

Incoming Call

When the watch receives incoming calls it will display to remind you, also you can reject or silent the call.

Idle alerts

When you are sitting for a long time, the watch will vibrate to remind you to get up for a while. Before using this function, you need to enable Idle alerts by tapping “Profile” -> “My devices” and turning on Idle alerts on the Da Fit App

Goal Notifications

When the number of steps reaches the set goal, the watch will display a goal to remind you. Before using this function, you need to enable Goal notifications by tapping “Profile” -> “My devices” and turning on Goal notifications on the Da Fit App

Watch Alarm Alert

When the alarm on the mobile phone rings, the watch will vibrate to remind you that the alarm is ringing. Before using this function, you need to enable Watch alarm alert by tapping “Profile” -> “My devices” and turning on Watch alarm on the Da Fit App

Settings

The watch has some settings, these can be accessed by going to the settings function from the menu. The settings include Display, Vibrate & Ring, DND, Low Power Mode, Phone, Phone Reset, System, About

Display : This has all the setting as per convenience on how you want to see your watch
DND : This will dim the light and turn off the vibrations.
Low Power Mode : This is the ultimate battery saver, this can be used when the watch is not much in use
Phone Call : You can check this for the Bluetooth Calling function
Phone Reset : This is a feature will allow you to reset the bluetooth calling feature
Vibrate & Ring : Select at what intensity you want the watch to vibrate
System : This is a feature has power off, reset, restart function
About : This is a feature allows you to check the system version