Outsunny IN231100429V01-GL 9 Outdoor Storage Shed Garden Tool House Instruction Manual
- June 4, 2024
- Outsunny
Table of Contents
Outsunny IN231100429V01-GL 9 Outdoor Storage Shed Garden Tool House
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center. Our contact details are below:
Country| 
Phone| Email
---|---|---
us| 001-877-644-9366|
[email protected]
CA| 416-792-6088|
[email protected]
UK| 0044-800-240-4004|
[email protected]
DE| 0049-0( 40)-88307530| [email protected]
FR| 0033-1-84166106| [email protected]
ES| 0034-931294512|
[email protected]
PT| 0034-931294512|
i[email protected]
IT| 0039-02494 71447| [email protected]
Tools Recommended
ASSEMBLY PREPARATION
Please check local building codes regarding footings, location and other requirements before beginning construction. Study and understand this owner’s manual of important information and helpful tips for easier and more enjoyable assembly.
Assembly instructions:
Reviewing all instructions and the appropriate information before you begin, make sure following the step sequence carefully for successful results.
Flooring base:
The site must be prepared so that the base of the shed is level all round and
checking with a spirit level is required.
The base can be constructed by treated timber or concrete, in order to stop
the moisture getting into the shed, The shed is not designed to be built onto
lawn directly. Also the ground will get muddy during rainy days.
If a concrete pad is made, it is important that this slopes towards the edges
to prevent water ingress. Time must be allowed for any concrete or cement to
dry before building the shed on top.
Bases can also be constructed from bricks ,blocks, or mounted on a concrete
pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the greenhouse frame drilled and screwed to the base.
Parts and Parts List:
Before you start, separate and identify all the parts and hardware to be sure that you have all the necessary parts for your building (refer to the Parts List Page).
Do not attempt to assemble the building if parts are missing because any building left partially assembled may be seriously damaged by light winds.
Safety must be put in the No. 1 position:
- Select a dry and calm day for your assembly. Team works ( Two or more people ) are required during the assembly;
- Wearing safety gloves, eye protection and long sleeves during the assembly to prevent injury; Pay attention to the sharp edge of some parts;
- Children and pets are not allowed entering into the construction site;
- Never concentrate your total weight on the roof of the building. When using a step ladder make sure that it is safety;
Care & Maintenance:
- Keep the shed clean with soft cloth, use water if necessary;
- Keep the door tracks clear of dirt and other stuff that prevent them from sliding easily.
- Clean the snow with necessary tools to make sure it is safe to enter into; Heavy snow may cause collapse, please make sure safety before entering into.
- The shed is not made for living but storing stuff.
NOTICE: If there is slight bending on the corners
-
Pls wear gloves and stretch the corners slightly until they are flat
-
Then the sheets will be normal and there is no effect ion to the assembling
PARTS LIST
| NO. | PART | Qty. |
|---|---|---|
| 1 | | 1
2| 
| 1
3L| 
| 1
3R| 
| 1
4L| 
| 1
4R| 
| 1
5| 
| 4
6| 
| 1
P1| 
| 6
P1A| 
| 2
P2| 
| 6
P2A| 
| 2
P4| 
| 6
P4A| 
| 2
25L| 
| 1
---|---|---
25R| 
| 1
7| 
| 1
8| 
| 1
9| 
| 1
10L| | 1
10R| | 1
11| | 1
GS| | 1
DRA| | 1
DRB| | 1
DX1| | 2
21L| | 1
21R| | 1
NO.| PART| Qty.
---|---|---
B1| | 2
B2| | 2
B3| | 4
13| 
| 4
P5| | 4
P6| | 2
19| | 1
16| | 4
17| | 2
GC| | 4
GE| | 2
GF| | 4
DF| | 1
DG| | 1
NO.| PART| Qty.
---|---|---
DH| | 2
20| 
| 2
F1| | 298
F2| | 39
F3| | 16
F4| | 5
S2| | 285
S1| |
277
- When diagonal measurements are equal, the frame is
- The Floor Frame must be BOTH square AND level or the holes will not line up properly.
ASSEMBLY INSTRUCTION
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
