SHARPER IMAGE AXIS 42 Airbar Tower Fan User Manual

SHARPER IMAGE AXIS 42 Airbar Tower Fan

Product Information

• Specifications
  • Product Name: AIRBARTM Tower Fan
  • Models: AXIS 32 / AXIS 42
  • Intended Use: Circulate air in indoor living spaces in the United States Not intended for commercial or industrial use

Product Instructions

• Important Safety Instructions
  • This owner’s guide and any additional inserts are considered part of the product.
  • They contain important information about safety, use, and disposal.
  • Before using the product, please familiarize yourself with all operating and safety instructions.
  • Keep all documents for future reference.
• Installation
  • WARNING: To reduce the risk of fire, electrical shock, and injury:
  • Place the product away from curtains, draperies, and other fabrics.
  • Avoid using a solid-state speed device like a dimmer control switch.
• Safe Use
  • WARNING: To reduce the risk of fire, electrical shock, and injury:
  • Do not operate with a damaged cord or plug.
  • Do not use it if the unit has been dropped or damaged.
  • Always turn off the power before moving or servicing the product.
• Servicing
  • WARNING: To reduce the risk of fire, electrical shock, and injury:
  • Clean the product regularly as instructed in the manual.
  • Before servicing, turn off the appliance and unplug it from the outlet.
• Frequently Asked Questions (FAQ)
  • Q: Can the tower fan be used outdoors?
  • A: No, this tower fan is intended for indoor use only in living spaces within the United States.
  • Q: What should I do if the cord or plug is damaged?
  • A: Do not operate the fan. Discard it or return it to an authorized service facility for examination and repair.
  • Q: How do I clean the tower fan?
  • A: Clean the fan regularly as instructed in the manual. Make sure to turn off the appliance and unplug it before cleaning.

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS

• This owner’s guide and any additional inserts are considered part of the product.
• They contain important information about safety, use and disposal.
• Before using the product, please familiarize yourself with all operating and safety instructions.
• Please keep all documents for future reference and pass these documents on, together with the product, to any future owner.
• See sihomecomfort.com to view, download and print the most current version of these instructions.

INTENDED USE:

• This product is intended to circulate the air in indoor living spaces only in the United States.
• This product is not intended for commercial or industrial use.
• The manufacturer assumes no responsibility for damage or injury due to unauthorized use or product modification.
• Failure to follow these directions will void the product warranty.

WARNING: Risk to Children and Impaired Persons

• Supervision is required during the installation, operation, cleaning and maintenance of this product by children 12 years of age and younger and anyone with reduced physical, sensory or mental capabilities.
• Children should be supervised to ensure that they do not play with the appliance, its parts and packaging material.

INSTALLATION WARNING

INSTALLATION WARNING— To reduce the risk of fire, electrical shock and injury to persons, observe the following:

• Place this product away from curtains, draperies, tablecloths and other fabrics, since they may be drawn into the product, damage the motor and/or cause a fire.
• No part of this product (the appliance, power cord, plug, packaging, etc.) should be placed near furnaces, fireplaces, stoves or other high-temperature heat sources. Do not use this product in a window, on an uneven or unstable surface, or near water.
• The appliance, power supply, power cord and plug cannot come into contact with water. Do not use this product on wet surfaces. Do not use this product in a bathtub or shower or position product where it may fall into a bathtub, laundry, swimming pool or other water container. Do not use this product outdoors or expose it to weather or elements.
• Do not run a cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area and where it will not be tripped over. The cord should not hang over the edges of counters or be placed where it can be crimped or closed indoors. Place the appliance near an easily accessible outlet so the product can be unplugged quickly during an emergency.

SAFE USE WARNING— To reduce the risk of fire, electrical shock and injury to persons, observe the following:

• WARNING: To reduce the likelihood of circuit overload, fire and electric shock, do not operate with a solid-state speed device, such as a dimmer control switch.
• Do not operate any fan with a damaged cord or plug. Discard the fan or return to an authorized service facility for examination and/or repair.
• Do not operate the unit if the unit has been dropped or damaged. Do not use this product if it has a damaged power cord or plug. To avoid the risk of electrical shock, do not attempt to repair or replace parts. Only original replacement parts may be used. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard. Contact (833.800.8669) or (help@sihomecomfort.com) for further instructions about replacement and repair.
• Before plugging a power cord into an electrical outlet, be sure that all electrical information on the rating label, including voltage, is compatible with your outlet’s power supply.
• Do not sit or stand on the product.
• Never use the cord as a handle or otherwise yank, strain or stretch the power cord.
• While the product is plugged in, do not insert or allow foreign objects to enter any input or output opening as this may cause a risk of electric shock or fire, or damage the product.
• A loose fit between the wall outlet (receptacle) and the plug may cause overheating and distortion of the plug. Discontinue use of the product in this outlet. Contact a qualified electrician to replace loose or worn outlets.
• This appliance has a polarized plug (one blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• Before moving, repositioning, servicing, cleaning and when not in use, use the product controls to turn off the power and then unplug. To disconnect from the outlet, grasp and pull only the plug. Also, power off and unplug if the product will be left unattended for an extended period or during electrical storms.

SERVICING WARNING— To reduce the risk of fire, electrical shock and injury to persons, observe the following:

• Clean your product regularly, only as instructed in this manual. Before cleaning, turn off the power on your product and unplug it. Do not use gasoline, thinners, solvents, ammonia or other chemicals for cleaning. Refer to the CLEANING instructions provided.
• Do not open the appliance housing while the product is plugged in. To avoid the risk of shock, all service and/or repairs must be done by a Sharper Image Authorized Service Center.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

User Servicing Instructions

1. Using the product controls, turn off the appliance.
2. Grasp the plug (not the cord) and disconnect from the outlet.
3. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse as approved by Consumer Service. For an authorized replacement fuse, please contact Consumer Service.
4. Once the replacement is received, use a small flat-head screwdriver to slide open the fuse cover (located on the plug) (See Fig. A).
5. Remove fuse by using the screwdriver to gently lift each end of the fuse (See Fig. B).
6. Install the replacement fuse by using the screwdriver to gently push each metal end of the fuse into the receptacle one at a time. Do not push on the centre of the fuse—it is fragile and may break.
7. Slide the fuse cover closed using the screwdriver. When closed, the cover should fit completely in the plug. No part of the cover should stick out (See Fig. C).
8. Plug your appliance into the outlet and turn the power on.
9. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
10. Risk of fire. Do not replace the attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard the product if the attachment plug is damaged.

FCC

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Contact Sharper Image Consumer Service or dealer or an experienced radio/ TV technician for help.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Supplier’s FCC Declaration of Conformity

• Unique Identifier: Sharper Image Models AXIS 32, AXIS 42
• Responsible Party: Vornado Air LLC
• Mailing Address: 415 E. 13th St., Andover, KS 67002
• Contact: www.sihomecomfort.com.

WARNING: Batteries may pose a choking hazard. Do not let children handle batteries.

BATTERY DISPOSAL:

• Please dispose of batteries according to the local laws and regulations of your region, and while keeping them away from children.
• Some batteries may be recycled and accepted for disposal at your local recycling centre.
• DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
• New and used batteries may cause injury. Keep new and used cells (or batteries) away from children.

PRODUCT INFORMATION

Your product includes the following:

1. Fan Body
2. Top Half Magnetic Base Parts (2)
3. Bottom Half Magnetic Base Parts (2)
4. Remote
5. AAA Batteries (2) (Not Shown)

WARNING – Choking hazard. Keep small parts, like screws, away from children and pets.

ASSEMBLY

ASSEMBLY No Tools Required

The AXIS 32/42 can be used in one of two orientations: horizontal or vertical.

For HORIZONTAL orientation:

1. Lay the fan body horizontally.
2. Install the 2 bottom-half magnetic base parts, one on each end of the fan body. Take care to align the notch on each bottom base part with the notch on the fan body.
3. Install the 2 top half-magnetic base parts. Again, take care to align the notches on the base parts with the notches on the fan body. When properly installed, the top and bottom base parts will magnetically click into place.

For VERTICAL orientation:

1. Lay the fan body horizontally.
2. Locate the power cord. This will be the bottom of the product in the vertical orientation.
3. Install the 2 bottom-half magnetic base parts to the bottom of the fan head (the end with the power cord). Take care to align the notch on each bottom base part with the notches on the fan body.
4. Install the 2 top half-magnetic base parts on the other end of the fan head. Again, take care to align the notches on the base parts with the notches on the fan body. When properly installed, the base parts will magnetically click into place.
5. Lift the product to a vertical orientation to use.

HOW TO USE

POWER ON / OFF

1. Touch ( ) to power the unit on and off.
   2. There are three speeds: HIGH, MEDIUM, and LOW.
   3. Touch ( ) to lower speed. Touch ( ) to increase speed.

REMOTE CONTROL

This product comes with a remote control. The remote control functions are the same as the control panel on the product.

• The remote control requires 2 AAA batteries (included but not installed).
• To install the batteries, remove the cover located on the underside of the remote control.
• If necessary, clean the battery contacts and also those of the device before battery installation.
• Remove any plastic protection from the batteries.
• On the inside of the battery cover, there is a + and a – sign indicating which direction you should insert your batteries.
• Ensure the batteries are installed correctly about polarity. Then replace the cover on the bottom of the remote.
• For battery replacement, always use the correct size and grade of battery for this product.
  • Note: Remove batteries from the remote control when not in use for an extended period and always remove dead batteries immediately and replace them with fresh ones. Do not store dead batteries in the remote.
  • Note: The remote requires a line-of-sight path to allow for the signal to be received by the tower. Position the tower so the receiver lens (located at the top of the product) is visible from the remote control.

CLEANING & STORAGE

Your fan will need regular cleaning. The fan has no user-serviceable parts inside and cannot be opened for cleaning. Never clean the product in any manner other than as instructed in this owner’s guide.

1. Power off and unplug the unit before cleaning.
2. Dust or wipe the fan with a damp cloth.
3. Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust.

During the off-season or after extended periods of non-use, you may choose to store your fan. To ensure long life of the product, it is recommended to store your fan by following these instructions:

1. Unplug the power cord and bundle it loosely.
2. Cover, or place back in retail carton if available. This prevents the fan from accumulating dust over time.
3. Store the fan in a cool and dry location.

TROUBLESHOOTING

The unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
The fuse needs to be replaced. See IMPORTANT INSTRUCTIONS for how to replace the fuse or contact Consumer Service.
The unit is not pro- during sufficient amount of air.| Ensure the unit is set to the highest setting for maximum air circulation.
Allow the unit to fully circulate the air throughout the room, this may take several minutes.
Ensure all air inlets and outlet grille are unobstructed.
Remote Control is not working.| The battery is dead. Replace with 2 new AAA batteries. Refer to REMOTE CONTROL – Battery Replacement for instructions.
Remote requires line of sight. Remove the obstruction and try again.
GFCI has tripped.| Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip when the user is changing speeds on a fan. In this event, change to an outlet that is not connected to a GFCI device. It could also indicate a weak or defective GFCI outlet. Contact a qualified electrician to check the GFCI outlet.

WARRANTY

2-YEAR SATISFACTION GUARANTEE

If you’re not satisfied with this product, let us know.

• Vornado Air, LLC warrants to the original consumer or purchaser that this Sharper Image® Fan (“Product”) is free from defects in material or workmanship for two (2) years from the date of purchase.
• If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.
• For warranty or repair service: Call 833-800-8669 or email help@sihomecomfort.com to obtain a Return Authorization (“RA”) form.
• Please have or include your Product’s model number and serial number, as well as your name, address, city, state, zip code and phone number when contacting Vornado for warranty service.
• To file a contactless warranty claim, visit sihomecomfort.com/contact.
• After receiving the RA form, ship your Product to  Vornado Air LLC Attn: Warranty & Repair 415 East 13th Street Andover, KS 67002.
• For your convenience, please have your model number and serial number when contacting Vornado with service inquiries.
• To ensure proper handling, packages must be marked with the RA number.
• Packages not marked with the RA number may be refused at the receiving dock.
• Please allow 1-2 weeks for repair and return of your Product after the Product is received.
• Repairs not covered by the warranty or outside the warranty period will require a fee to cover the cost of materials, labour, handling and shipping.
• This warranty does not apply to defects resulting from abuse of the Product, modification, alteration, mishandling, improper maintenance, commercial use or repair or service of the Product by anyone other than Vornado; damages which occur in shipment or are attributed to acts of God.
• Improper product use, which includes using an external device that alters or converts the voltage or frequency of electricity, or shipping a Vornado product to a country not intended for use will void all warranties.
• Any unauthorized product modification, repair by an unauthorized repair centre, or use of non-approved replacement parts is not recommended and any consequences will not be covered by support services or product warranties. The product warranty will be honored only on models that are being used in the country intended.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
• VORNADO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
• Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
• This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
• The manufacturer assumes no responsibility for damage caused by failure to follow these instructions or improper product use. Any such actions will invalidate the product warranty.
• All company names and product names are trademarks of their respective owners. ©
• All rights reserved. All technical information, data, and instructions for the installation, connection, and operation contained in these instructions for use correspond to the latest available information at the time of printing.
• The contents of this manual may differ slightly from the actual product. Observe any additional supplements.
• ©2022 Vornado Air LLC, Andover, Kansas 67002 USA.
• Specifications are subject to change without notice.
• Sharper Image® name and logo are registered trademarks.
• Manufactured, marketed and distributed under license by Vornado Air LLC, Andover, Kansas 67002.
• Manufactured in China.
• Sharper Image® Distributed under license by Vornado Air LLC, Andover, Kansas 67002.
• 833.800.8669
• sihomecomfort.com.
• help@sihomecomfort.com.
• CL3-0939 R-, V00
• MODELS: AXIS 32 / AXIS 42

References

• Home - Sharper Image Home Comfort
• Contact - Sharper Image Home Comfort
• Home - Sharper Image Home Comfort

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>