PARAMETER D018 TWS Airbuds User Manual
- June 7, 2024
- PARAMETER
Table of Contents
PARAMETER D018 TWS Earbuds User Manual
PARAMETERS
【 Model No. 】
|
D018
---|---
【 Bluetooth Version 】
|
V5.0
【 Working Time 】
|
2~3Hour
【 Music Play 】
|
2~3Hours
【 Battery Type 】
|
4.2V / 50mAh
【 Standby Time 】
|
100Hours
【 Charging Time 】
| 1Hour
【 Working Distance 】|
8~10Meters
【 Working Temperature】
|
-40~80 ℃
【 Frequency 】
|
2.402~4.480GHz
USING INSTRUCTIONS
-
Power On
Push forward and take out the earphone, the led light will flash and earphone will power on automatically -
**Automatic Pairing
** When the charging case indicator light bright, take out the earphones, they will power on and pair automatically after the indicator light flash in red/blue color for 1-2 seconds.
-
Turn On Bluetooth
Turn on Bluetooth on your device and search for D012A. -
Connected Finished
Click D012A and connected finished.
FUNCTION KEYS
INDICATOR LIGHT STATUS
| Pairing Mode | Working | Low Battery | Charging | Full Charged |
|---|---|---|---|---|
| Led light flash in red/blue color | Blue light blinks slowly | Led light flash | ||
| red slowly | Shines in red light | The red light is off | ||
| ⦿Flash | ●Solid Light | ●●Solid Light | ●●●Solid Light | ●●●●Solid Light |
| 0%~10% Power | 10%~25 % Power | 25%~50% Power | 50%~75 % Power | 75%~100% Power |
CHARGING STATUS DESCRIPTION
【 Under Non-Charged State 】
When earphones low battery, led light flash in red, you can hear battery low prompt invoice every 2 minutes.
【 Under Charged State】
When put down earphones in charging case, earphones will switch off automatically. Red light is always on when charging, and the red light is off when it is fully charged.
【 Precautions】
- Earphones will automatically shut down If there is no operation in 5 minutes after switch on. When the phone is out of distance, earphones is disconnected. When return to the communication distance, the earphone will automatically connect to the phone.
- If the single-sided earphone is connected to the mobile phone, the two earphones cannot be connected. In this case, the mobile phone Bluetooth should be turned off. When the dual earphones light flashes red and blue, double-click one of the earphones and you can pair it later.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>