tp-link HS200 Smart Switch Installation Guide
- May 15, 2024
- tp-link
Table of Contents
tp-link HS200 Smart Switch
Specifications
- Rating: 100-120 V~ 50/60 Hz
- Load: 15 A General Use
- 600 W Max Incandescent/Halogen, 1/6HP Motor
- Operation temperature: 0~40°C
- Method of mounting included: Independently mounted (Vertically position only)
- Operating control, Type 1. C action Pollution Degree 2, Rated Impulse Voltage 2500V
- Software Class A, NEMA Type 1
- Recommended Load Types:
- LED: 100W
- Ceiling Fan: 120W
Wire Your Switch
-
Turn off the circuit breaker. Then remove the old wallplate of the wall switch and label the wires.
-
Ground: Usually green or copper.
-
Neutral: Usually white, not connected to the dumb switch.
-
Line/Load: Usually black, and connected to the dumb switch. If you are unsure, consult a qualified electrician
-
Disconnect wires from the old switch
-
Connect the wires to the smart switch as shown be.
Note: No need to distinguish between Line and Load wires -
Line up the switch with the mounting holes. Secure it with screws.
-
Attach the wallplate and turn on the circuit breaker. Then the wiring is finished.
Set Up Your Switch
STEP 1 DOWNLOAD APP
Get the Kasa Smart app from the App Store or Google Play.
STEP 2 SET UP
Tap the button in the app.
- If your device is white, select Smart
- Switches > Smart Switch (Wi-Fi).
- If your device is black or almond, select
- Smart Switches > Smart Switch (BLE).
- Then follow app instructions to complete the setup.
Appearance
Button Explanations
LED Status
Third-Party Services
Kasa works with Alexa, Google Assistant, and other third-party services to
control your switch by voice. Go to Me > Third-Party Services in the Kasa
Smart app to integrate third-party services. For step-by-step setup
instructions, please visit:
- Google Home Assistant: https://www.tp-link.com/support/faq/1534/
- Amazon Alexa: https://www.tp-link.com/support/faq/944/
Specifications
- Rating: 100-120 V~ 50/60 Hz
- Load: 15 A General Use
- 600 W Max Incandescent/Halogen, 1/6HP Motor
- Operation temperature: 0~40°C
- Method of mounting included: Independently mounted (Vertically position only):
- Operating control, Type 1. C action
- Pollution Degree 2, Rated Impulse Voltage 2500V
- Software Class A, NEMA Type 1
Recommended Load Types
- LED: ≤ 100W
- Ceiling Fan: ≤ 120 W
CAUTION
High Voltage-Disconnect power supply at the circuit breaker before servicing
Safety Notice
Before installing, servicing or removing the switch, read and follow all
safety precautions including the following:
- CAUTION – Risk of Electric Shock – More than one disconnect switch may be required to de-energize the equipment before servicing.
- A circuit breaker that disconnects the Line and a neutral conductor simultaneously is suitable. Ensure power is off at the circuit breaker before removing or installing any switch.
- Use a non-contact voltage tester to ensure the power is off.
- The Smart Switch must be installed and used by the National Electric Code (NEC) or your local electrical code.
- If you are unfamiliar with these codes and requirements or are uncomfortable performing the installation, consult a qualified electrician.
- Do not install the Smart Switch with wet hands or when standing on wet surfaces.
- Install only in a suitable UL-listed outlet box (suitable dimensions: H > 2.95 in./75 mm, W > 1.81 in./46 mm, D > 2 in./51 mm).
Support
For technical support, the user guide and other information, visit
https://www.tp-link.com/support/.
References
- TP-Link Product Support - Wireless Networking Equipment Support
- How to connect your TP-Link Kasa devices to Google Home
- How to make my TP-Link Kasa Device work with Amazon Alexa