CHARMOR 2835 LED Mirror Instruction Manual
- May 15, 2024
- CHARMOR
Table of Contents
CHARMOR 2835 LED Mirror
Before Installation
Thank you so much for choosing our mirrors, to facilitate the use of our products, please read this instruction carefully before installation.
Please Notice
- Please read all instructions carefully before assembling the item.
- After opening the package, inspect the product immediately upon receipt for transit damage or missing parts.
- Please power the mirror with a plug to test all its functions before installing it on the wall.
- Assembly by two or more adults is highly recommended.
- Disconnect power before installing, adding or changing any components.
- Ensure that the fixing location can take the weight of the complete footing.
- Keep the voltages 110V. If the voltage exceeds 110V, please use a transformer.
- To connect the wires to the electrical junction box, a qualified technician or electrician is highly recommended.
DANGER – To reduce the risk of electric shock:
- Always disconnect this furnishing from the supply main before cleaning or servicing
Product Description
Before installation, please check to make sure these functions work properly:
Anti-fog switch: After connecting the power, the anti-fog function is already
turned on automatically. If you don’t need to use it, just touch it to turn it
off, to prevent wasting energy. The defogging will take effect within 10
minutes after it’s turned on and close in 1 hour, so you can turn it on 10
minutes before taking a bath.
Dim switch: The LED light supports 10% to 100% brightness adjustment,
just long press the button. This button has a memory function, the next time
you open the mirror it will be in the same brightness it was in before it was
last closed, which means that you don’t have to touch the buttons each time.
Colour temperature switch: The front and back lights all have three colour
temperatures that can be switched (3000K/4000K/6000K), just need to short-
press this button. And this button has a memory function as well.
Product Information
| Anti-fog | Yes |
|---|---|
| Memory | Yes |
| Certificate | ETL |
| Light Source | LED |
| Cable Length | 1.5M |
| Material | Tempered Glass |
| Input Voltage | 110V~; 50/60Hz |
| Warranty | 3-year manufacturer |
Specifications and Parameters
Installation Instruction
Package contents
You may need these tool
Meaning of LED Lights
| State of LED Light | Meaning |
|---|---|
| White Light ON | Function is Working |
| Blue Light ON | Function Standby |
| Light OFF | Power OFF |
Troubleshooting
LED doesn’t turn on / Defogging doesn’t work
| Open the power box on the back of the mirror and test the power cables, tighten the cables if they are loose.
( Please cut off the power first before testing the power supply and cables).
---|---
Part of the light strip is a fault
| Firstly, please pull the outer silicone strip away and press the inner light strip inward. If it still doesn’t work, need to replace the strip light.
After using it for a few months, the light doesn’t work.
|
Please contact us to replace the power supply.
Manufacturer: Zhongshan Chengjiang Glass Technology Co., Ltd.
Address: Jichang Village, Dongfeng Town, Zhongshan
City, Guangdong Province, China
Contact us:
Chengjiang_Glass_Technology@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>