Xinfeiyi Technology Y04 Smart Tracker User Manual
- May 15, 2024
- Xinfeiyi Technology
Table of Contents
Xinfeiyi Technology Y04 Smart Tracker
IMPORTANT INFORMATION
This guide is for your benefit to make sure you fully understand how to use the product.
This product is a 8/bluetooth wireless device running the ‘isearching’
application. Before using it, you need to place the things that are easily
lost with the product together.
In the effective Bluetooth connection range (About 25 meters/75 fft no
barrier), you can make the product beeps to find your things with your phone’s
opp, you can double-click the product’s button to cause your phone ring, and
you con use the product to take photos.
(With these features, you can find anything you want to find with ease. Such
as,keys,bags,remate control, wallet, mobile phone … )
When the product is out of range with your phone’s Bluetooth, the alert will be triggered in both of the product and your phone, and last lost location will be marked on the map in the ‘isearching’ opp. (Ta use this feature, you need to open ‘Phone Alarm While Lost function’ in the setting. With these features, your belongings and mobile phone will be protected in a specified range. If you forget to toke your belongings, you will be reminded with your phone’s alert. If your phone is left behind, you will be reminded with the tracker’s alert.)
In order to use the product, your device will need both of the following:
- Bluetooth 4.0
- 105 8.0 and higher, Android 4.4 and higher.
APP DOWNLOAD AND INSTALL
Apple, APP Store,iPhone,iPod and iPad touch are trademarks of Apple Inc.
Google play is a trademark of Google Inc. All other trademarks are properties
of their respective owners.
POWER ON/OFF
Power On:
Hald down the tracker’s function button for at least 3 seconds.
You will hear two beeps, the tracker is now powered on.
Power Off:
Hold down the tracker function button for at least 3 seconds.
You will hear a long single beep. The tracker is now powered off.
START APP
Open the app on your smartphone. Please take time to review tht! tutorial page.Please click the NA/low# of the notifications of the APP.
SELFIE
Press’ Camera; the camera will show up.
Press the connected tracker’s button ta take the photo, it works usu remote
shutter.
LOCATION
Location History: When you park your car, press the tracker’s button, it will mark your current location on the map.Press the location history you will find your vehicle.
Lost History: If you lost your tracker, you can find it in ‘Lost History’. A pin-drop will be marked automatically on mop and it will tell you the tracker’s location. Just press ‘1.-0st History’ to find their card.
BATTERY REPLACEMENT
Battery type: CR2032
The CR2032 is a standard sized buttery and easy to purchase.
Open the case from the buttons of the device and replace the battery.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.