bcp SKY6514 2-Drawer Rattan Coffee Table Instruction Manual
- June 14, 2024
- bcp
Table of Contents
bcp SKY6514 2-Drawer Rattan Coffee Table
INSTRUCTION MANUAL
Always.
As shoppers, we’re always trying to find the perfect balance between quality &
value. At BCP, we believe we’ve achieved that. Our diverse catalog of everyday
essentials is tailored especially to our customers & guaranteed to hit that
sweet spot of high quality & low price.
Please retain these instructions for future reference.
- Please do not exceed the weight limitations of this item.
- Do not stand on or use any part of this item as a step ladder.
- Firmly secure all bolts, screws, and knobs before use.
- Reconfirm that all bolts, screws, and knobs are secure every 90 days.
- Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is completely assembled.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Be aware that some parts are heavy and have sharp edges.
- If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.
TOOLS REQUIRED
-
PHILLIPS SCREWDRIVER
-
FLAT HEAD SCREWDRIVER
-
4MM ALLEN WRENCH (PROVIDED)
-
120 LBS TOP WEIGHT CAPACITY
-
15 LBS DRAWER CAPACITY
-
1 PERSON ASSEMBLY
-
UP TO 45 MIN. ASSEMBLY
HARDWARE
PARTS
PRODUCT ASSEMBLY
- Locate four part F runner sets and separate the two pieces, consider the larger half F1 female runner and the smaller half F2 male runner **.
**
-
Locate the part 3 & **4 left and right side panels and attach two part F1 Female runners with four part G screws , two screws per runner.
Attach two part F1 female runners to both sides of the part 6 middle divider with four part G screws ,** two screws per side. -
Attach one part 8 & 9 drawer side to one part 10 drawer back with four part E screws
Slide the part 11 drawer bottom into the grooves of the drawer assembly, then insert four part B cam locks into the part 8 & **9 drawer sides , two locks per side.
Insert four part A cam bolts into the part 7 drawer front, and attach one part J handle with one part K screw , then attach the drawer front to the part 8 & 9 drawer sides **by turning the cam locks. -
Attach two part F2 male runners to the part 8 & **9 drawer sides with four part G screws ,** two screws per runner.
-
Attach one part 8 & 9 drawer side to one part 10 drawer back with four part E screws.
Slide the part 11 drawer bottom into the grooves of the drawer assembly, then insert four part B cam locks into the part 8 & 9 drawer sides , two locks per side.
Insert four part A cam bolts into the part 12 drawer front , and attach one part J handle with one part K screw , then attach the drawer front to the part 8 & **9 drawer sides** by turning the cam locks. -
Attach two part F2 male runners each to the part 8 & **9 drawer sides with four part G screws ,** two screws per runner.
-
Insert six part A cam bolt into the part 1 top panel .
- Insert six part B cam locks into the part 3, 4, and 6 panels , two locks per panel, then insert four part C dowels into each panel, twelve dowels total
Attach the part 3, 4, and 6 panels to the part 2 bottom panel , then secure by turning the cam locks.
Insert the part 5 back panel into the part the groove of the part 2 bottom .
Attach the part 1 top panel to the part 3, 4, and 6 drawer panels with six part D **screws.
**
-
Attach two part 15 base bottom frame connectors to two part 13 base side frames with four part H bolt s . Attach two part 14 top frame connectors to the side frames with four part H bolt s .
Screw four part L foot caps into the side frames, adjust so all feet are level. -
Attach the base assembly to the cabinet assembly with six part I bolts . Attach the two part 14 frame connectors to the part 2 bottom with four bolts, and the part 13 side frames with two bolts.
-
Insert the t wo drawers into the coffee table assembly.
Question about your product? We’re here to help. Visit us at:
help.bestchoiceproducts.com
| | | |
---|---|---|---|---
Chat Support
| Product Inquiry| Orders FAQ| Product Assembly|
Returns & **Refunds**
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice Products as undamaged.
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal
injury, property damage or loss, whether direct, indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
unapproved modification, or neglect of this product.