Brilnurse White Noise Sound Machine User Manual

White Noise Sound Machine
User Manual

Accessories

Warnings

1. Do not disassemble or repair the product by yourself to avoid damage.
2. Please keep away from water sources to avoid damaging the product.
3. Please keep away from high temperatures and fire sources.
4. Do not use a corrosive Deaner to wipe or dean the product.
5. Please wipe the surface with a soft wet towel.

Buttons Description

1. Sound Switch:
   Light tap In group 5 nature sounds, 5 waves sounds, 5 thunderstorm sounds, and 2 hypnotic songs. 5 environmental sounds.

2. Time adjustment: Long press 2 seconds to enter the time adjustment mode. Press the x key combination to adjust the time. Once set, press this key for 2 seconds to exit.
   Fan sound switching: Light tap tracks in the group to switch through the 5 fan sounds.

3. Time adjustment: After entering the time adjustment mode, press this key to adjust the hour range. Press the x Key combination to adjust the time. Once set, press this key for 2 seconds to exit.

4. White noise switching: Light tap tracks in this group to switch through the 5 white noise.

5. Audio mode switching: Long press for 3 seconds to automatically switch between Bluetooth mode and white noise mode.

6. Volume adjustment key: Press once to decrease and increase the volume by one level, and long press to decrease and increase by one level every 0.5s until the maximum.

7. Time adjustment: Press this key to adjust the time in time adjustment mode.

Power Button: Press normally for 3 seconds to turn it on/off.

1. Light mode adjustment: Colorful light, color selection, breathing light, rhythm light, and warm light (touch the light button or tap the top lampshade).

2. Brightness adjustment: 30%, 70%, 100% three gear adjustment.

3. Type-C DC 5V 1000mA input

4. Timing toggle switch: The toggle position corresponds to 30 minutes, 60 minutes, and continuous playback respectively (After the corresponding timing playback time, the machine enters the energy-saving standby mode, and the power button needs to be pressed for the machine to enter the power on playback state again.)

5. 3.5mm earphone jack: Earphone audio output.

App Introduction

Home

1. Download XIULEMIAN software, turn on GPS positioning, turn on the white noise power key, and turn on XIULEMIAN, the software will automatically connect to Bluetooth, select the corresponding model at
2.  and click CD to connect the device.
3. The mode can select the corresponding playback mode: music, fan sound, white noise, and Bluetooth sound playback.
4. Sound can select the corresponding sound to play, and quickly put your favorite sound into the library.
5. Switch or pause the sound.
6. Adjust the sound volume.
7. Adjust the light brightness.
8. Lighting mode selection: colorful light, color selection, breathing light, rhythm light, and warm light.
9. Adjust the light color.
10. Timed shutdown.
11. Alarm clock adjustment.

Color

Sound
Sound source library, you can select your favorite sound from the quick sound panel.
Custom
Set your favorite profile and add it to the quick panel.

Introduction To Special Functions

1. Memory function: Each time the sound source is selected and the playback duration exceeds 5 seconds, the shutdown system will remember and save the current sound source at this time, and the same sound source will be played the next time it is turned on.

2. Timing function: Turn on and set the machine shutdown time, and the machine will be shut down when the set time is reached (dial for 30 minutes, 60 minutes, circular playback setting or custom setting in mobile APP [this dial code is invalid when using APP timing]).

3. Wake-up light mode : Turn on to set alarm time, turn on the wake-up function 30 minutes before the set time, the light will slowly brighten up until the set time of the alarm clock is reached and the alarm will sound, tap the top lampshade or any button for light setting to enter the snooze mode with the alarm sound turned off, and the alarm will sound again 5 minutes later. If you need to turn off the alarm clock, press to turn off the alarm clock (The alarm clock can be turned off when the alarm clock start time is not reached during the wake-up process).
   Sunset mode: Turn on the timed shutdown function. The sunset mode will be started 30 minutes before the shutdown. The light will dim slowly until the set time is reached and will turn off the machine (Setting the lighting mode at this time to colorful lights, breathing lights, rhythmic lights, and warm lights will select the current color and darken slowly).
   

4. Audio function: Connect to the mobile phone Bluetooth to play music (long press for 3 seconds to automatically switch to Bluetooth mode, click n for the previous song, click to pause, and click for the next song).

5. Lighting DIY function: You can customize the color sequence of colorful lights (you can select and set the color sequence in the [Color] interface on the mobile APP).

Precautions

1. The white noise device will automatically connect to the mobile device connected to the APP last time. If you need to switch to a new mobile device connection, please disconnect the APP connection status of the original mobile phone and activate the new mobile phone connection.
2. The audio connection status and APP connection status are dual channel connections. You need to ensure that the audio Bluetooth connection is successful before mobile music can be played.

Product Parameters

Support Headset mode, maximum output 150mw
Power Supply mode| 5V1A adapter charging or USB plug-in| Bluetooth
Function| Support Bluetooth mode

This device complies with part 15 of the FCC Rules Operation is subiect to the following two carbons.

1. this device may not cause harmful interference and
2. This device must accept any interference received including interference that may cause undesired operation

Changes or rrodificalrarts not expressly approved by the party responsible for compliance could void the user’s authority to operate the escapement Ths equipment has been tested and found to conch/ with the limb for a Class B digital device. pursuant to Part 15 of the FCC Rules These links are designed to provide reasonable protection against harmful interference in a residential retaliation This equipment generates uses and can radiate radio frequency energy and if not installed aid used in accordance with the instructions may cane harmful interference to talc communications, However. Were is no guarantee that interference with not occur in a particular mstallalton If this equipment does cause haurdul interference to rad o or telcos on reception which can be (intern ned by turning The equipment off and on, the user is encouraged to try to correct the interference by one or more ce the town measures:

• Reorient or relocate the recaOng antenna
• increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a Grout different ban that to which the receiver is connected
• Consult be dealer an experienced radioffil techrsoan for help

This equipment complies with the FCC RF radiation exposure lends set forth for an uncontrolled environment This equipment should be installed and operated with a maximum distanced 20crn between the radiator and any part of your body.

MADE IN CHIN

Documents / Resources

| Brilnurse White Noise Sound Machine [pdf] User Manual
FR006, 2A8TO-FR006, 2A8TOFR006, White Noise Sound Machine, Noise Sound Machine, Sound Machine, Noise Machine
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>