GE APPLIANCES APCD07 Class Smart Portable Air Conditioner Owner’s Manual

GE APPLIANCES APCD07 Class Smart Portable Air Conditioner

Product Information

Specifications

• Models: APCD07, APWD07, APCD08, APWD08, APSD08, APCD10, APWD10, APXD10, APLS07, APLS08, APLS10, APLH10
• GE Module Number: #____
• Password for WiFi Setup: #____
• Trademark: GE (General Electric Company)

Product Usage Instructions

Controls
Refer to page 4 of the manual for detailed information on the controls of the portable room air conditioner.

Care and Cleaning
Proper care and cleaning instructions are provided on page 7 of the manual. Regular maintenance ensures optimal performance.

Installation Instructions
For installation guidance, refer to page 9 of the manual. Follow the steps carefully to set up the air conditioner correctly.

Troubleshooting
If you encounter any issues with the air conditioner, consult the troubleshooting section on page 15 for solutions before seeking professional help.

WiFi Setup
Instructions for setting up WiFi connectivity can be found on page 16. Connect your device to the internet for added convenience.

FAQ

1. Q: Where can I find the model and serial numbers?
   A: Locate the model and serial numbers on a label on the side of the air conditioner.

2. Q: How do I register my GE appliance?
   A: Visit the provided websites or phone numbers in the Consumer Support section of the manual or mail in the pre-printed registration card included in the packing material.

3. Q: What type of batteries does the remote control use?
   A: The remote control uses 2 AAA (1.5 volt) alkaline batteries. Do not use rechargeable batteries.

Before you begin (on some models)
Record the GE module number and password for wifi setup. To locate this information, see page 16.
GE Module Number #____
Password #____

Write the model and serial numbers here:
Model #
Serial #
Find these numbers on a label on the side of the air conditioner. GE is a trademark of the General Electric Company. Manufactured under trademark license.

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.
Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family. We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you will too. Among other things, registration of your appliance ensures that we can deliver important product information and warranty details when you need them. Register your GE appliance now online. Helpful websites and phone numbers are available in the Consumer Support section of this Owner’s Manual. You may also mail in the pre-printed registration card included in the packing material.

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

WARNIN:G To reduce the risk of fire, electrical shock, injury to persons, or damage when using the air conditioner, follow basic precautions, including the following:

• Read all of the instructions before using this appliance.
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Do not operate the air conditioner if it has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped.
• The air conditioner should be serviced only by qualified service personnel. Call an authorized service company for examination, repair, or adjustment.
• Disconnect power before servicing.
• Disconnect power before cleaning.

NOTE: Turning off power by pressing the Power button does NOT disconnect the appliance from the power supply.

• Do not install or use the air conditioner in any area where the atmosphere contains combustible gases or where the atmosphere is contaminated. Avoid any chemicals coming in contact with your air conditioner.
• Do not store anything directly on top of the air conditioner.
• Use two or more people to move and install air conditioner.
• Never operate the air conditioner without the filters in place.
• Do not use the air conditioner near a bathtub, shower or wash basin or other wet area.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

WARNING
Risk of Fire or Explosion. This unit contains flammable refrigerant. Additional safety precautions must be followed.

• Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
• The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an operating gas appliance or an operating electric heater.
• Do not pierce or burn refrigerant tubing. Be aware that refrigerants may not contain an odor.
• Keep ventilation openings clear of obstruction.
• When handling, installing, and operating the appliance, care should be taken to avoid damage to the refrigerant tubing.
• Do not drill holes in the unit.
• Maintenance, cleaning, and service should only be performed by technicians properly trained and qualified in the use of flammable refrigerants.
• GE Appliances does not support any servicing of the air conditioner.
• Dispose of air conditioner in accordance with Federal and Local Regulations. Flammable refrigerants require special disposal procedures. Contact your local authorities for the environmentally safe disposal of your air conditioner.

WARNING
How to Insert the Batteries in the Remote Control

• Remove the battery cover by sliding it according to the arrow direction.
• Insert new batteries, making sure that the (+) and (-) of battery are installed correctly.
• Reattach the cover by sliding it back into position.

NOTES:

• Use 2 “AAA” (1.5 volt) alkaline batteries. Do not use rechargeable batteries
• Remove the batteries from the remote control if the system is not going to be used for a long time.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc) batteries.

WARNING Caution for Ingestion. The battery may cause suffocation if swallowed by children.

READ AND SAVE THESE INSTRUCTIONS

Controls

Features and appearance will vary.
Lights next to the buttons on the air conditioner control panel indicate the selected settings.

• A. Control Panel Display
  Displays the Set Temperature in degrees Fahrenheit or degrees Celsius, or the hours remaining in a Time Delay.

• B. Power Button
  Turns the air conditioner on or off.
  NOTE: Turning off power by pressing the Power button does NOT disconnect the appliance from the power supply.
  Press the Power Button. The power indicator and Temperature display will Illuminate. Select desired settings. After one minute, the display lights will turn off. Press any button on the unit or the remote, the display will illuminate. Then press corresponding buttons to change unit function.
  Note: if changing functions from the remote, it may require multiple presses to synchronize remote to the unit.

• C. Mode Button
  Press the Mode button to toggle among the operating options.
  The corresponding indicator will illuminate:
  Cool – Cools the room to the set temperature
  Fan – Circulates the air in the room without cooling
  Dry – Reduces the humidity in the room
  Heat (on some models) – Heats the room to the set temperature

• D. Fan Speed Button
  The fan speed can be adjusted from Low, Medium, to High speed when the air conditioner is in operation. NOTE: The fan speed cannot be adjusted when the unit is in Dry or Sleep modes. Press the Fan speed button to toggle among the three speeds. The corresponding fan speed indicator will illuminate.

• E. Timer / Temperature Set Controls
  Adjusts the Temperature or Hours in Time Delay.
  To Set the Temperature:

  1. Press the Mode button until the Cool mode is selected.
  2. Press the Up Arrow or Down Arrow buttons to select the desired temperature.
     NOTE: The temperature cannot be set when the air conditioner is in either Fan or Dry mode.
     NOTE: The Up Arrow and Down Arrow buttons, when pressed at the same time, allow you to select between displaying the temperature in ºF or ºC.

• F. Timer Button
  Program a time from (1-hour to 24-hours) for the air conditioner to turn Off or On. When a Time Delay is programmed, the Timer indicator light will illuminate.
  While the air conditioner is operating:

  • Press the Timer button.

  • Press the Up/Down Arrow buttons to select the number of hours you want the air conditioner to continue to operate before turning Off.
    NOTE: Wait approximately 5 seconds for the Turn-Off time to be saved.
    While the air conditioner is off:

  • Press the Timer button.

  • Press the Up/Down Arrow buttons to select the number of hours you want the air conditioner to remain off before turning On.
    NOTE: Wait approximately 5 seconds for the Turn-On time to be saved.
    To cancel the timer:
    Press the Timer button once, the hours remaining will flash, press the timer button again and the timer will be canceled.
    To turn on WiFi:

  • Press and hold the Timer button for 3 seconds to turn on the WiFi function.
    Refer to the “WiFi Set up” section for more information on how to connect your Portable AC to your router and installing the HQ App.

• G. Sleep
  Press the Sleep button to activate sleep mode, press again to cancel.
  The fan speed will automatically change to low speed and cannot be adjusted. The temperature will rise after 2 and 4 hours to ensure your comfort overnight.

• H. Auto Swing
  The louver on your portable air conditioner will open automatically when you turn it on (do not pry it open or push it shut).

  • When your AC is turned on, the louver will swing up and down.
  • You can press the Auto Swing button to fix the louver in your desired position

The display will always default to show the room temperature. When the air conditioner is turned on, it will automatically start in the last mode and fan settings selected.

Cool Mode
Use the Cool mode for cooling.

To set the Cool mode:

1. Press the MODE button until the Cool indicator light is lit.
2. Press the FAN button to set HIGH, MEDIUM, or LOW fan speed.
3.  Press + or – to set the desired temperature.

After settings have been made, the display will change back to show the room temperature. The temperature control is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the set level of comfort. Set the temperature control at a lower number and the indoor air will become cooler. Set the temperature control at a higher number and the indoor air will become warmer.
NOTE: If the air conditioner is off and is then turned on while set to Cool, it will take approximately 3 minutes for the compressor to start and cooling to begin.

Cooling Descriptions
For Normal Cooling-Select the Cool mode and HIGH, MEDIUM, or LOW fan speed with a middle set temperature. For Maximum Cooling-Select the Cool mode and HIGH fan speed with a lower set temperature. For Quieter & Nighttime Cooling- Select the Cool mode and LOW fan speed with a middle set temperature.
NOTE: If you switch from Cool, Dry or Heat mode setting to OFF, wait 3 minutes before restarting.

Dry Mode—Dehumidification
Use the Dry mode to provide dehumidification only. The fan will run at a fixed speed at this setting, so a fan speed cannot be set. Keep windows and doors closed for the best dehumidifying effects.

To set the Dry mode:
Press the MODE button until the Dry indicator light is lit. In the Dry mode, a set temperature will not be displayed. After Dry mode has been set, the display will change back to show the room temperature.
NOTE: If you switch from a Dry setting to OFF or to a fan setting, wait at least 3 minutes before switching back to a Dry setting.

FAN Mode
Use the FAN mode to provide air circulation and filtering without cooling.

To set the FAN mode:.

•  Press the FAN button until the desired indicator light for high, medium, or low fan speed is lit.

Since fan only settings do not provide cooling, a set temperature will not be displayed. After FAN speed has been set, the display will change back to show the room temperature. The exhaust hose and window kit do not need to be installed when operating in fan mode.”

HEAT Mode (for Heat/Cool models only)
Use the Heat mode at Low, Med, or High Speed for heating. Use the Temperature Increase (+) /Decrease (-) buttons to set the desired temperature. An electronic thermostat is used to maintain the room temperature. The heater will cycle on and off to keep the room at the set level of comfort.

Power Outage Recovery Feature
In the case of a power outage or interruption, the unit will automatically re- start in the settings last used after the power is restored.
NOTE: If the TIMER was set before the power outage, it will need to be reset after power is restored.
Features and appearance may vary. Icons on the remote control indicate the selected settings

REMOTE CONTROL

1. Insert the two batteries (provided).
2. Aim the remote control at the signal receiver on the control panel to operate the air conditioner.

A POWER
Turns the air conditioner on or off.
NOTE: Turning off power by pressing the POWER button does NOT disconnect the appliance from the power supply.

• Press the POWER button. The Power indicator will illuminate.

B MODE
Press the MODE button to toggle among the operating options. The corresponding indicator will illuminate:

• Cool – Cools the room to the set temperature
• Dry – Reduces the humidity in the room
• Fan – Circulates the air in the room without cooling
• Heat (on some models) – Heats the room to the set temperature

C. Temperature
Adjusts the Temperature or Hours in Time Delay.

To Set the Temperature:

1. Press the MODE button until the Cool mode is selected.
2. Press the + or – buttons to select the Temperature.

NOTE: The temperature cannot be set when the air conditioner is in either Fan or Dry mode.

To Set the Timer:

1. Press the + or – buttons to select the desired hours to turn on or off.

D. FAN SPEED
The FAN SPEED can be adjusted from Low, Medium, to High speed when the air conditioner is in operation. NOTE: The fan speed cannot be adjusted when the unit is in Dry mode.

• Press the FAN SPEED button to toggle among the three speeds. The corresponding fan speed indicator will illuminate.

E. TIMER
Program a time from (1-hour to 24-hours) for the air conditioner to turn Off or On. When a Time Delay is programmed, the Timer indicator light will illuminate.

F. SWING
The louver on your portable air conditioner will open automatically (do not pry it open or push it shut).

1. When your AC is turned on, the louver will swing up and down.
2. Press the auto swing button to fix the louver in your desired position.

Note: The Air Conditioner LED display will turn off 1 minute after the last button is pushed. To Turn on the LED display, press any button on the unit or the remote, then press corresponding function to change settings. The remote may require multiple pushes to synchronize remote the unit.

Care and Cleaning

CLEANING
WARNING

Electrical Shock Hazard
Disconnect power before cleaning. Failure to do so can result in death or electrical shock.

1. Unplug or disconnect power.

2. Use only a soft cloth dampened with water to clean the cabinet.
   NOTE:

   • Do not use a liquid or spray cleaner to clean the air conditioner.
   • DO NOT use chemicals, abrasives, ammonia, chlorine bleach, concentrated detergents, solvents or scouring pads. Some of these chemicals/items may damage and/or discolor your air conditioner.

3. Dry thoroughly with a soft cloth.

4. Plug in or reconnect power.

Air Filter
The air filters should be cleaned at least every two weeks for your unit to operate at optimum efficiency.
CAUTION: DO NOT operate the air conditioner without a filter because dirt and lint will clog it and reduce performance.

To remove:

1. Unplug or disconnect power.

2. Pull to remove the filter panels.

3. Remove the filters from the panels.

4. Wash or vacuum the dust from the air filters.
   NOTE: If washed, gently shake the filter to remove the excess water and dust particles trapped in the filter.

5. Reinstall the filters onto the panels.

6. Replace both filter panels

7. Plug in or reconnect power

Internal Water Tank
The Water Full indicator (“FL” on the control panel display) illuminates when the internal water tank has filled with condensed water. The unit will not cool until the tank has been emptied to prevent overflow and possible damage to the floor under the AC.

To Empty the Internal Water Tank:

1. Unplug or disconnect power.
2. Place a shallow 1 1/2 quart or larger pan (not included) below the lower drain located on the back (near the bottom) of the air conditioner.
3. Remove the cap and the rubber plug and drain the water tank.
4. Re-insert the drain plug and screw the cap snugly into place.
5. Plug in or reconnect power.

Continuous Draining
(optional and only in dry mode)

1. Remove the top drain cap.
2. Connect a hose with a garden hose connection to the outlet.
3. Route the drain hose to a suitably sized container* or a floor drain.

• Be sure to use a large container (3 gallons or larger is recommended) and monitor the water level in the container continuously. The unit will not shut off when the container is full. An overflowing container can cause flooding and damage to the floor.”

Storage
If the unit is not being used for a long period of time:
To Empty the Internal Water Tank:

1. Unplug or disconnect power.
2. Drain the water from the water tank. (See “Internal Water Tank section” above.)
3. butup of cast or dirting to repack the unit to avoid
4. Store the air conditioner in a cool, Dry location.

How to Insert the Batteries in the Remote Control

1. Remove the battery cover by sliding it according to the arrow direction.
2. Insert new batteries, making sure that the (+) and (-) of battery are installed correctly.
3. Reattach the cover by sliding it back into position.

NOTES:

• Use 2 “AAA” (1.5 volt) alkaline batteries. Do not use rechargeable batteries.
• Remove the batteries from the remote control if the system is not going to be used for a long time.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc) batteries.

Installation Instructions

Questions? Call GE Appliances at 866.907.1655 or visit our Website at: GEAppliances.com.

BEFORE YOU BEGIN
Read these instructions completely and carefully.

• IMPORTANT — Save these instructions for local inspector’s use.
• IMPORTANT — Observe all governing codes and ordinances.
• Note to Installer – Be sure to leave these instructions with the Consumer.
• Note to Consumer – Keep these instructions for future reference.
• Skill level – Installation of this appliance requires basic mechanical skills.
• Completion time – Approximately 1 hour
• We recommend that two people install this product.
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered under the Warranty.
• You MUST use all supplied parts and use proper installation procedures as described in these instructions when installing this air conditioner.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button while plugged into the outlet. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Location Requirements

• Place the air conditioner on a flat, level surface. For optimal performance place portable 20” from exterior wall. For all other sides a minimum distance of 30” should be maintained.
• Keep the air conditioner free of any obstructions such as drapes, curtains, blinds, etc.
• The exhaust hose should be free of any obstructions.
• Do not place the air conditioner on an unstable or raised surface because it could fall and cause damage or injury.
• Do not place the air conditioner in direct sunlight or near a heat source such as baseboard heaters, stoves, etc.
• The window panel can be installed in a window with a minimum 20” (55.88 cm) to a maximum 46” (121.92) opening.

PARTS INCLUDED

(Appearance may vary)

1. Auto Swing Louver
2. Controls
3. Built-in Handle
4. Casters (4)
5. Upper Filter Panel
6. Top Continuous Drain
7. Exhaust Vent
8. Lower Drain
9. LDCI Plug
10. Cord Winder (2)
11. Lower Filter Panel
12. Power Cord
13. Remote Control
14. 2 AAA batteries

Window Panel Combinations to fit window openings
(Appearance may vary)

UNPACK AIR CONDITIONER
WARNING
Excessive Weight Hazard
Use two or more people to move and install air conditioner. Failure to do so can result in back or other injury. Remove packaging materials. Save the carton and the foam packaging for storing the air conditioner when not in use.
NOTE: There are NO packing materials inside the air conditioner to remove—Do Not open the cabinet.

• Properly dispose of/recycle all packing material.
• Handle the air conditioner gently.
• Keep the air conditioner upright and level. Do not set the air conditioner on its side, front, back or upside down.

Pre-assemble: Exhaust Hose and Window Bracket Panel Adaptor

1. After pre-assembly.
   Note: To install nozzle and adapter to hose, expanded both ends of the hose fully, the turn clockwise to screw onto hose.

Assemble Exhaust Hose Assembly and Mount to Back of Unit Extend the exhaust hose approximately 4″ from each end. Screw the adapters onto the ends of the hose, turning clockwise until they are secure. Insert the round adapter into the exhaust vent on the back of the Air Conditioner and turn counter-clockwise to secure it.

Install Exhaust Nozzle to Main Window Panel

1. Hold the main window panel so that the L-shaped edges of the panel are facing you.
2. Align the exhaust nozzle with the slots in the opening, and then insert and slide the nozzle to access the hole from the back of the main window panel.
3. Turn the main window panel over, so that the nozzle is away from you. Add the grill, and insert flat tip screws through the holes to fasten the grill and window panel to the adapter.

Install Main Window Panel and Extension Panels

NOTE: Measure the window opening and use the extension panels as referenced on page 11 to fit your window.

1. Open the window and place the window kit assembly into the window.
   NOTE: The window assembly is designed to accommodate either a double hung or sliding window.

2. Adjust the extension panel(s) to the width or height of the window as shown.

3. Depending on the number of extension panels used, turn the knobs to secure the extension panel(s) to the main panel. Install from the back. NOTE: There are many window types on the market today. Use the foam strips and brackets (provided) to secure the extension panels that will fit the window opening.
   For vinyl windows only.

4. Skip to step 6 for wood windows. Place the two top window brackets and two bottom window brackets where they will best support the extension panels. Use pointed screws to attach top bracket to the support panels.

5. Apply the top foam strip (provided) across the top of the window panel assembly, and then apply the bottom foam strip (provided) across the bottom front edge of the window panel assembly, as shown.

6. Place the window panel assembly in the window, and using the screws provided, fasten the assembly to the window sill and window frame.

7. Using one pointed screw, install the Security bracket to the window.
   NOTE: The security bracket prevents the window from being opened from the outside.

Troubleshooting Tips

power supply cord.
The Power button has not been pressed.| Press the POWER button on the Control Panel or Remote Control to turn ON the air conditioner.
There is no power to the electrical outlet.| Plug a working lamp into the outlet to check for power.
A household fuse has blown or a circuit breaker has tripped.| Replace the fuse or reset the circuit breaker.
The control was programmed for a Time Delay.| Cancel the Time Delay. See “Control Panel.”
The batteries in the remote control are dead.| Replace the batteries.
The internal water tank is full.
NOTE: The air conditioner automatically turns off, and the Water Full indicator (“FL” on the control panel display) illuminates to alert you of this condition.| Empty the water tank. See “Air Conditioner Care.”
Remote control is not working| Batteries are dead.| Replace the batteries.
Batteries are installed incorrectly.| Make sure the batteries are inserted in the correct position.
Air conditioner is working but the room is not cooling.| The room temperature is hot.
NOTE: On extremely hot and humid days,the air conditioner will take longer to cool the room.| Allow time for the room to cool when you first turn on the unit. Make sure the air conditioner has an adequate BTU rating for the size of the room being cooled.
The control is set incorrectly to Fan or Dry mode.| Set the Mode to Cool and the Fan Speed to High.
Airflow is restricted.| Remove any obstacles to the airflow and redirect airflow for uniform cooling.
Temperature set too high.| Lower the set temperature.
Air filters are dirty or restricted.| Clean the air filter. See “Air Conditioner Care.”
Air conditioner installed incorrectly| Check the exhaust hose and window panel for proper installation.
Doors and windows are open.| Close the doors and windows to the room being cooled to prevent cooled air from escaping.

Error Codes

WiFi Setup (on some models)

GE Appliances SmartHQ (for customers in the United States)
GE Appliances SmartHQ Enabled*. If your Air Conditioner (AC) has a Connected Appliance Information label located on the outside as shown below, your AC is GE Appliances SmartHQ Enabled. A WiFi communication card is built into the product allowing it to communicate with your smart phone for remote monitoring, control and notifications. Please visit GEAppliances.com/connect to learn more about connected appliance features, and to learn what connected appliance apps will work with your smart phone. Please call 800.220.6899 for assistance.

How it Works
Download the SmartHQ app

Use the app to connect your room air conditioner to WiFi

Once connected, use the app to turn down your air conditioner as you leave work.

Getting Started
To connect your room air conditioner, you’ll need the GE Appliances App. The app will walk you through the connection process. Download the app from iTunes or Google Play.

All connected appliance data is held in strict accordance with the GE Appliances Connected Data Privacy Policy. Visit GEAppliances.com/privacy/privacy_policy_connected to view this policy.

Questions about SmartHQ
Get answers you need about setting up WiFi appliances and connecting to your home network in our support articles. Visit
products.GEAppliances.com/appliance/gea-support-search- content to view wifi connect room air conditioner support articles.

REGULATORY INFORMATION

FCC/IC Compliance Statement:
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

Labeling: Changes or modifications to this unit not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
*Select Models Only
This product has WiFi capability and requires Internet connectivity and a wireless router to enable interconnection with an Energy Management System, and/or with other external devices, systems or applications.

Limited Warranty

One Year
From the date of the original purchase| Replacement, repair, or refund of the original retail price for any product which fails due to a GHIHFW LQ PDWHULDOV RU ZRUNPDQVKLS. ,I WKH XQLW LV H[FKDQJHG, WKH UHSODFHPHQW XQLW LV ZDUUDQWHG for the remainder of your product’s original one-year warranty period. GE Appliances will, at its sole discretion, replace the product with a product of the same or comparable functionality and quality or refund the original retail price.

In Order to Make a Warranty Claim During Your Retailer’s Allowable Return Period:

• Properly pack your unit. We recommend using the original carton and packing materials.
• Return the product to the retail location where it was purchased.
• Include in the package a copy of the sales receipt or other evidence of date of original purchase. Also print your name and address and a description of the defect.

In Order to Make a Warranty Claim During the Remainder of the One-Year Warranty:

• Locate your sales receipt and make note of the model and serial number.
• Call 800-432-2737 to initiate a warranty claim.
• You will be asked to provide your name, address, receipt information, model and serial number.
• Warranty claims may require electronic or mailed-in evidence of purchase.

What Will Not Cover:

• Customer instruction. This owner’s manual provides information regarding operating instructions and user controls.
• Improper installation. If you have an installation problem, or if the air conditioner is of improper capacity, contact your dealer or installer. You are responsible for providing adequate electrical connecting facilities.
• Failure of the product resulting from modifications to the product or due to unreasonable use including failure to provide reasonable and necessary maintenance.
• Replacement of house fuses or resetting of circuit breakers.
• Failure due to corrosion on models not corrosion- protected.
• Damage to the product caused by improper power supply voltage, accident, fire, floods or acts of God.
• Incidental or consequential damage caused by possible defects with this air conditioner.
• Damage caused after delivery.

EXCLUSION OF IMPLIED WARRANTIES
Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.
For US Customers: This limited warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. If the product is located in an area where service by a GE Appliances Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Appliances Service location for service. In Alaska, the limited warranty excludes the cost of shipping or service calls to your home. Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor US:
GE Appliances, a Haier company
Louisville, KY 40225

Consumer Support

GE Appliances Website
Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day, any day of the year! You can also shop for more great GE Appliances products and take advantage of all our on-line support services designed for your convenience. In the US: GEAppliances.com

Register Your Appliance
Register your new appliance online at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise. You may also mail in the pre-printed registration card included in the packing material. In the US: GEAppliances.com/register

Schedule Service
Expert GE Appliances repair service is only one step away from your door. Get online and schedule your service at your convenience any day of the year. In the US: GEAppliances.com/service or call 800-432-2737 during normal business hours.

Extended Warranties
Purchase a GE Appliances extended warranty and learn about special discounts that are available while your warranty is still in effect. You can purchase it on-line anytime. GE Appliances Services will still be there after your warranty expires. In the US: GEAppliances.com/extended- warranty or call 800.626.2224 during normal business hours.

Remote Connectivity
For assistance with wireless network connectivity (for models with remote enable), visit our website at GEAppliances.com/connect or call 800.220.6899 in the US.

Parts and Accessories
Individuals qualified to service their own appliances can have parts or accessories sent directly to their homes (VISA, MasterCard and Discover cards are accepted). Order on-line today 24 hours every day.
In the US: GEApplianceparts.com or by phone at 877.959.8688 during normal business hours. Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

Contact Us
If you are not satisfied with the service you receive from GE Appliances, contact us on our Website with all the details including your phone number, or write to:
In the US: General Manager, Customer Relations | GE Appliances, Appliance Park | Louisville, KY 40225
GEAppliances.com/contact

References

• Appliance Parts, Accessories & Water Filters | GE Appliances
• Connect Your Smart Appliances
• Contact Us or Get Help with Questions | GE Appliances
• Bodewell Care Protection Plans
• Privacy Statement
• GEAppliances.com/register
• Appliance Repair Service and Support | GE Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>