Kiddery Toys BK2104 Wooden Kitchen Playset for Toddlers and Big Kids Instruction Manual

Kiddery Toys BK2104 Wooden Kitchen Playset for Toddlers and Big Kids

Product Information

Specifications :

• Model: BK2104
• Parts Included: Boards 1-31, Other Parts and Accessories as listed
• Tools Required: Screwdriver, screws (L, F, I, A, B, J), bolt & nuts (J), wooden dowel (H), hooks (G)

Product Usage Instructions

1. Step 1: Install Door Handles
   Install handles on boards 5, 6, 20, 21, and 25 using screws (L).

2. Step 2: Install Chalkboard
   Attach the chalkboard to board 5 using screws (F).

3. Step 3: Install Strikers
   Attach strikers (D) to boards 5, 6, 20, 21, and 25 using screws (I).

4. Step 4: Install Door Catchers
   Install door catchers (B) on boards 4, 7, and microwave divider (26) using screws (I) and bolts & nuts (J).

5. Step 5: Outer Body Formation
   Attach fridge outer board (3) to the base layer (1&2) with screws (A). Attach base covering board (2) to base layer (1) using wooden dowel (H).

6. Step 6: Install Outer Board
   Attach dishwasher compartment outer board (8) to the base layer with screws (A).

7. Step 7: Install Separators
   Attach boards 4 and 7 to the base layer with screws (A).

8. Step 8: Covering the Back
   Install boards 15, 16, and 17 to the back of the case.

9. Step 9: Making Sections in the Fridge
   Install board 11 in the fridge using screws (C) to create a shelf.

Frequently Asked Questions (FAQ)

• Q: Can I use different screws for assembly?
  A: It is recommended to use the specified screws as per the manual for proper assembly and stability.

• Q: What if a part is missing from the package?
  A: If any part is missing, please contact customer support for assistance in obtaining the missing piece.

KITCHEN PLAY SET
Model #BK2104

Assembly Instructions
Please read this manual carefully and assemble the product according to the instructions given in this manual.

Product Parts/Boards

Other Parts and Accessories

Tools Required

• Screwdriver (Not included in the kit)
• Screw wrench (Included in the kit)

Preparation

• Do the unboxing carefully.
• Separate all the product parts before starting assembly.
• Identify all the parts and the numbers (according to the manual) for the correct assembly.
• Assembly should be done by an adult.

Note: If you have any questions, please contact costumer service, contact info on the last page.

Assembly instructions

1. Step 1: Install Door handles:
   Install the respective handles with the boards/doors 5, 6, 20, 21, and 25. Use screws (L) and mount them from the back of the doors using the screwdriver .

2. Step 2: Install Chalkboard:
   Attach the chalkboard to the freezer door (5) using screws (F).

3. Step 3: Install strikers with the doors:
   Attach the strikers (D) to the boards/ doors 5, 6, 20, 21, and 25 by using the screws (I).

4. Step 4: Install door catchers to the fridge, oven & dishwasher, shelf:
   Install door catchers (B)to the boards, i.e., fridge (4), microwave divider(26) by using the screws (I) and to oven & dishwasher divider (7) by using the bolt & nuts (J).

5. Step 5: Outer Body Formation:
   Note: To assemble the outer body, first lay the base (3&1) on the ground as shown.
   Attach the fridge outer board (3) to the base layer (1&2) by using screws (A). Now attach the base covering board (2) to the base layer (1) by using wooden dowel (H).

6. Step 6: Install outer board:
   Attach the dishwasher compartment outer board (8) to the base layer by using the screws (A).

7. Step 7: Install Separators:
   Now attach boards (4) and (7) to the base layer by using the screws (A). Note: Stand the set upright for the next step

8. Step 8: Covering the Back:
   Install the boards 15, 16, and 17 to the back of the case.

9. Step 9: Making Sections in the Fridge:
   Install the board (11) in the fridge by using screws (C) to make a shelf in the fridge.

10. Step 10: Make Sections in The Dishwasher:
    Install the shelf (12) at the 1/2 section of the dishwasher compartment by using hooks (G).

11. Step 11: Install Towel Rack:
    Install the towel rack by placing the holding stick (19) between the hooks (18) and attach the pieces on both sides using (A)

12. Step 12: Install the Upper Layer of The Fridge:
    Install the board (10) at the top of the fridge to make the upper compartment of the fridge using screws (A).

13. Step 13: Install the Doors:
    Install the oven door (20) and dishwasher door (21).

14. Step 14: Preparation of the stove panel:
    To prepare the stove panel, mount the stove knobs into the board (23).

15. Step 15: Install the stove panel:
    Attach the stove panel above the oven and dishwasher and install it using the wooden dowels (H), Insert one wooden dowel (H) on part (7)

16. Step 16: Preparation of the stove and sink:
    Attach the 4 burners to the board (22) using screws(E), the faucet using screws (M), the two rectangular sticks (27) using screws (C), supporting column (9) above the board (22) horizontally using (C),

17. Step 17: Install the Prepared Stove & Sink Board:
    place the prepared stove & sink board (22) over the oven and dishwasher and attach from the fridge section by using screws (A) and to the (27’s) using screws (C)

18. Step 18: Prepare and Install Hanging Rack:
    To make the hanging rack, install the hooks to the board (24) by using screws (E), then attach it to the column and board of the fridge by using wooden dowels (H).

19. Step 19: Preparations of Upper Shelf:
    Install the upper shelf board (30) by placing it over the hanging rack and attach it by using screws (A & K).

20. Step 20: Attachment of (26):
    Install the board (26) by placing it at the middle of the upper shelf board (30) by using screws (C).

21. Step 21: Install shelf back cover and microwave door:
    Install the shelf back cover (31) and microwave door (25) of the shelf.

22. Step 22: Install Shelf Roof:
    Install the board (29) over the shelf to complete this section.

23. Step 23: Install Freezer Door And Back Cover:
    Install the freezer door (5) and back cover (14).

24. Step 24: Install Freezer top roof:
    Install the freezer roof board (13) by using the screws (A) to complete the refrigerator.

25. Step 25: Install Mobile Holder:
    Install the mobile holder to the fridge by using screws. Note: This next 2 steps 26&27 is only an option to secure to wall.

26. Step 26: Install Back Handle Part 1:
    Install the part (N) at the back side of the board (14) and fasten them using bolt nut (O), flat washer (T), flat washer (S), nut (O), and tighten them with a wrench (R).

27. Step 27: Install back handle Part 2:
    Install the other side of the part (N) by using nut (P), flat washer (T), bolt (Q), and tighten them using the wrench (R).

28. Step 28: Accessories:
    Hang and place the accessories (provided in the kit) to give your kitchen a final look!!!

Start enjoy playing with your kitchen!!

Safety Instructions

• Assembly should be done by an adult.
• Don’t climb shelves to reach the top.
• Place the unit over flat ground.
• Tightly fix all the screws to prevent any accident.
• Mount the handles and hooks tightly to prevent them from falling off.
• Avoid overloading shelves.

Warranty

• 1-Year Limited Lifetime Warranty:
  The original purchaser for this unit is provided with a 1-YEAR WARRANTY.

• Covered Under Warranty:

  • The warranty begins from the date of purchase. For the first year, coverage is for both parts and labor on warranty repair services.
  • Service option, availability, and response times may vary and may change at any time. In accordance with applicable law. the company may require that you furnish additional documents and/or comply with registration requirements before receiving warranty service.
  • Note: Customers have to provide proof of purchase to initiate the repair work under warranty. We strongly recommend keeping the original receipt.

Not Covered Under Warranty

1. We do not offer a warranty for products that have been bought secondhand or as a resold product.
2. Issues of replacement and refunds on units purchased less than 30 days from an authorized dealer must be addressed to the dealer directly.
3. If the products purchased from an authorized dealer are after 30 days from the date of purchase, please send the units to us for service and repair.
4. We do not cover the cost of repairs and replacements due to misuse by the owner’s improper maintenance, and/or lost units.
5. Any water damage to the product will not be covered.
6. The warranty is voided if the hardware has been altered or an authorized person has damaged the hardware while attempting repair work.
7. We reserve the right to retain and discard any part or accessories that have been found damaged upon replacement and repair.
8. Damage caused by accident, abuse, misuse, flood fire, earthquake or other external causes.

Kiddery Toys Inc.

• Text or Call: 1-914-623-8794
• Email: [email protected]
• Website: www.kidderytoys.com

References

• Kiddery toys

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>