Paisheng CS01 Exclusive 3 Channels Camera User Manual

USER MANUAL
Exclusive 3 channels camera

Product Specification

Max support 64G Ciass10 TF card
2.5men digital 720P reas view lens port
Speaker| Monophonic 15°10mm spesker
Mic| 4015 Standard Omnidirectional Microphone

Features

Working Environment

Key Features (picture for reference only, mainty in kind)

1. Menu/Photography
2. Power button
3. Down
4. Confirm button
5. Scroll up key/ong press to tum on or off WIFI
6. Front camera
7. Microphone
8. Reset button
9. Holder interface
10. Rear camera interface
11. Power interface
12. TF Card slot
13. Display screen
14. Inside camera(optional)
15. Long press/hold the mode playback button to turn on and off the night vision light
16. Lock key

( ****) Power button, short press to turn on. off screen, long press to switch on. off the device.
(M) Menu / camera / playback button
Press [ 4 ] key to stop recording. press (15) to enter photo mode. press [2 ] to take photo: tn the camere mode. press (15) to enter playback mode. press [OK] key to playbeck. Lock functon: In case of video recording. short press [16] for a key lock function to protect the current video fide. and this file will not be covered by the cycle video in video mode tong press (M) to enter video menu settings as follows:

Recorder Menu

[ ]Down hey. snort press [ ] to select function al the Menu interface. short press button to turn on off sound record af the shooting interfece
[ ]Up key. 1, shor press [ ]to select function st the Menu interface; 2. in case of video recording short press OK button to pause. then short press [ ]butinn to suvich trent inside view image (require inside view tens), 3, long press[ ]button to switch fromt-rear view wage. 4. in case of front-rear view image. short preee OK button fo pawee. then short prose [ ] Doutton to switch fvont- rear view image ‘require rear view lens! (OK) Confirm button, shori press to confirm in the menu interlace , short press to video record on off in the veo mode
Rear view lens (optionat) in case of video recordng. i Og OF reer view lone ment AV in pate ot dome . there’s a rear view image in topng of the screen. thal means connected successtullly: short presse OK bution te peuse, long prese [ ]button to ewiich front rear view image.
When heag up ‘R’ geer. it wilt show full mage of rear wew  Note: This device can only suppost dual cameras fo video record a ihe same time instead of 3 channels camera, that is front-nside camera or front-rear camera, if installed o reerview camera and choose front-inside wew mode. it wil sutomatically indicate full wnege of car reversing vraual when pos hang up “A” geer, tet won’ effect front-inside vdeo record, afeo will Avtcmnaticely switch back front-inside view after cance! “R” gear.
As for system update to support 3 channels camere to video record at the same time. please prevell in kind end we’re sorry for ao further notice.
Reset hey (RESET)
It the recorder crashes and accidental operation ie not a normal faut. presse [ RESET) to shutdown the device. then press [OK) to reboot the device.

Installation Notes

1. Presse tect the rear view comers fireBy. if 4 works well then install (peckege without reer view lene can be ignored).

2. Turn off the car engine.

3. The TF card insert the recorder slot.
   (Note) Pieaee use the high speed TF card ‘Ciass10 above. capacity of not tess tran 4G8. TF card manwmum support 32G8.

4. The recorder vie a brecket fixed to the lront windehield of the car,

5. insert the car charger inte the car cogerette ighter.
   [Note] When weing. extend the charging line siong the edge of the car door trame and carpet ender the car laying

6. install the rear cemers at the rear of the vehicle, and pay sitertion to the up and down Cirection Wiring can be buried along the edge af the car rool laying. { Note) There are two weys to msial the rear camera:
   A. Adsorbed on the glass above and behend the car. hands-on seit-instaieion (Reversing vieual function can not be achieved. onty real-time recording reer video)
   B. To find 8 professional installation stall instaited in the license plate shove the camera at the same time need to connect the power reversing Aghts ‘ Reversing viewal function can be schieved!

7. Adjust the lone position to ensure the best viewing angle.

8. Start the engine and chech that the machine is operating property

Features

1. Use the automatic recording funcaen
   Start ine car engine, the recorder setomoticely starts to open the recording function Close the cas engine, The recorder automatically saves the contents of the log snd shuts down. recorded video segments ere siored or the TF card. When the TF card ie full. the “Doce wit overwrite the cides! recorded enage preferenbally.
   [Note] a. Time segment of record can be set 1/2)3 minutes in the many .
   b. The video individuelly saved in the folder named “OCIMA’ end “OCIMB’ m TF card \package wnciude rear view lens).

2. Use mobon detection
   In standey mode, enter the mens screen open the motian detection mode When the lens is aensdive to he periphera/ area of 8 moving obsect, the state machune into the camera. recording 30 seconds alter Te system stops recording. To exit the motion  detection mode, in standby Mode to emer the menu screen cloee motion detection mode

3. G-eonsor
   The buill-in gravity sensor (G-seneor). if senous veticte collision, the recorder wéll lock the first 5 seconds and 10 seconds siler the image date when the accident occurred while the bottom left of the chaplay screen diepiays a tock icon :tocked mages will be saved as a special Gie. the fle will not be overwritten cycle (note) Gravity sensor (G-Sensorjeensitivity adjustment support may actually need to change setting in the setup menu according to their mage.

4. The device has a key lock feature that will need to retain an image without being locked loop overwritten .in the video mode, short press [M) key logger wiil then lock the entire video image.

5. In shooting mode, Press the [M) key to enter the menu setting. find the date. time menu. short press the (OK) button to confiem and return to the setup menu settings. press the (MJ) key to exit the menu setting.
   [Note] in order to effectively record the date and time traffic safety accident forensics. before using the menu setting.

6. File playback
   In the playback mode, prees the {OK} key to play beck. To exit playback mode, press MODE button agein.

7. Reversing visual function
   Firat , you must connect the dvr with car charger, rear-view camera connect the teversing lights. Insert the car charger. machine will automatically start recording status, screen switch R position in the recording mode automatically switches to the rear-view camera, display reverse image. After teversing visual machine automatically return to video mode.
   Reminder: Piesse test the rearview camera is normal before installation.

8. Parking monitor(To achieve unattended surveillance video)
   To achieve this function must be connected to the machine in the case of electricity, in the main menu to apen the motion detection and parking monitoring function, in the standby state of the vehicle under vibration or moving objects in front, the recorder according to G-sensor to sense automatically start the machine and automatically locks the video for 30 seconds, and sutomaticaity save the video file, the video 30 seconds after 5 seconds without the operation will automatically shut down
   (note) This function is only used when stopping. Please tum off the motion detection and stop monitonng function during normal driving.

FAQ

The information provided in this manust is for reference only. Please prevail inkind (some special features depend on different modeis) . All rights reserved.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
  This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Please downioad WIFI products
(No download required for non WIFi)
Press and hold the key to open the hot spat of the machine
SSID: 15 Start – Password: 12345676

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>