LG StandbyME Smart Touch Screen Installation Guide
- May 15, 2024
- LG
Table of Contents
LG StandbyME Smart Touch Screen Installation Guide
Assembly
A Insert the stand base into the styrofoam groove as shown in the Figure.
B Insert the bar into the hole of the stand base along the groove until
it reaches the parting line.
C Secure the four screws
Check the orientation of the power cable and cable holder
Hold the screen and secure the power plug.
A Check the position of the power plug on the back cover of the screen.
B Secure it tightly to the back cover side.
Secure the screen to the stand.
A Insert the stand hook into the back cover groove and tighten while
pushing the lower part, as shown in the Figure.
(Push it until you hear a [click] sound.)
B Secure one screw to the cable holder
Secure the ring cover of the stand.
A Align the screen back cover and ring cover [●mark] and install them.
B Check if it sits tightly as shown in the Figure.
Disassembly
-
Position the screen vertically
-
Push the top of the screen lightly in the direction of the arrow to disassemble a part of the cover space.
Caution
Avoid pushing it hard.
There is a risk of damage. -
Use a wedge or pull it with your hand to completely disassemble the cover.
-
Position the screen horizontally and disassemble the cable holder screw.
-
Lower the rear lever and push the bottom of the screen forward, as shown in the figure
-
Lift the screen, separate the top of the screen, and hold the screen
-
Press the plug lock, push it in the direction of the arrow, and then disassemble the screen completely
Do not lift the plug or pull it downward when disassembling the screen. -
Lay the stand on the box packaging, remove the four screws, and then disassemble the stand bar
Plug-in
Battery Installations
Power Instructions
Dimensions
Warning Instructions
Read Safety and Reference.
Due to onvironmental government regulations about imports and battery
destruction in Colombia, Tve will not include the battenes for the remote
control
Easy Setup Guide
Please read this manual carefully before operating your set and retain it for
future reference,