KAILI C170 Two Way Radio User Manual

: May 15, 2024
: KAILI

Table of Contents

KAILI C170 Two Way Radio
Product Information
Product Usage Instructions
USER’S MANUAL
Charging the Battery Pack
Functions Operation:
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KAILI C170 Two Way Radio

Product Information

Technical Specifications

Frequency Range: 462.5500-462.7250MHz, 467.5625-467.7125MHz
Supply Power: DC3.7V
Memory Channel: 22
Antenna Configuration: Internal Antenna
Ground Method: Cathode
Work Mode: Co Difer-fequency Simplex Communication
Dimension: [Dimension]
Output Power:
- 462.5500-462.7250MHz: 32.04dBm
- 467.5625-467.7125MHz: 25.72dBm
Modulation Mode: FM(F3E)
Sparious Radiation: 7.5W
Preemphasis Character Per Octave: 6dB
Emission Current: 1000mA
Sensitivity:
- Audio Power
- Audio Distortion

Product Usage Instructions

Charging the Battery Pack

The battery is not charged in the factory. Please charge the battery under the environmental temperature 5-40°C before using.
After purchasing or long-term storage (more than two months), charging the battery for the first time may not reach its saturation capacity. Repeat charge/discharge two or three times to achieve the best battery capacity.
Before charging, power off the transceiver. Using the transceiver during charging may affect correct charging.
If the battery has been fully charged, do not charge it again as it may shorten the service life or damage the battery.
If the service time is significantly reduced even after correct charging, replace the battery.

Frequently Asked Questions (FAQ)

Q: How do I switch between Chinese and English voice on the device?
A: To switch between Chinese and English voice, navigate to the settings menu and select the language option to change the voice language.
Q: What should I do if I encounter a busy channel while using the device?
A: If you encounter a busy channel, activate the Busy Channel Lock feature to prevent transmission on that specific channel until it becomes available.
Q: How can I enable the Power Saving Mode on the device?
A: To enable Power Saving Mode, access the settings menu and locate the Power Saving option. Toggle it on to conserve battery power when the device is not in active use.

USER’S MANUAL

UHF 462-467MHz Super Receiving
Wireless Clone
One-click Code Breaking
Screen Display
Scanning
Monitoring
Chinese/English Voice Prompt
Keyboard Lock
Power Display
Busy Channel Lock
Power Saving Mode
Low Battery Warning
Voice Companding/Scrambling Function
Programming Encryption Function
Special Signaling
50 CTCSS/208 DCS

Charging the Battery Pack

The battery is not charged in the factory.please charge the battery
under the environmental temperature 5-40 C before using.
After purchasing or long-term storage(more than two months) charging the battery for the first time can not reach its saturation capacity,repeat charge/discharge for twice or three times to make battery capacity achieve the best state.
Before charging,please power off the transceiver,using the transceiver during charging may affect correct charging.
If the battery has been charged fuly, please do not charge it again otherwise the service life of the battery may be shorten or may be damaged.
If the service time is significantly reduced even after completely correct charging, the battery can not be used any more, please replace a new battery

$KAILI-C170-Two-Way-Radio- $2$$

SPECIFICATIONS

We May Change The Specifications For Technical improvement Without Prior Notice

Basic Operation:

Turn the power switch to turn on /off the radio
Short press【UP】【DOWN】keys to adjust the channels 3.PTT: press this button whenever you wish to talk with the user of the other radio

Functions Operation:

Scanning
It is convenient for the user to search for calls from other channels.When”Side Key 2″ in the software is programmed to the scanning function, long press【DOWN】 key for two seconds to
enter into the scanning mode, the transceiver will start to scan with the current channel; Operate it again to exit
Keyboard Lockout
Long press the【FUNCTION KEY】to lock al buttons, operate it again to unlock
Short press the【FUNCTION KEY】 to display the current battery level.
Monitoring
Long press【UP】 key for two seconds to enter into the monitoring mode, release it to exit
VOX
This function can be voice activated so the user doesn’t have to press the PTT key.
When “VOX level” in the software is selected, short press the 【FUNCTION KEY】twice to enter into the VOX mode, then short press【UP】 key or 【DOWN】 key to turn on/off the VOX, Press PTT key to exit(or exit after 5 seconds).
Chinese/English Voice Prompt
The transceiver has a manual switching function between the Chinese and the English. Switch to Channel 16, turn off the transceiver, then press the【UP】 key and meanwhile turn on the
transceiver to switch between the Chinese and English
Mireless Clon
Turn the two radios to Channel 2 and turn them off, then press the【UP】 key and turn them on, press the PTT key of the radio which need to be cloned to start the data transmission, the 16 channels will be cloned,the radio can be used normally after restarting it
One-click Code breaking
Turn the radio to Channel 1 and tum it off, then press the【UP】 key and turn it on, the radio enter into the code-breaking mode.
When any radio transmits, it can talk normaly after receiving the signal, that is, the channel has been deciphered,and the radio will automatically save to the current channel. Switch to Channel 2 Channel 3,..,and operate like this. The radio can be used normally after restarting it
Time Out Timer(TOT)
The purpose of the TOT is to prevent any single person from using a channel for an extended period of time.An alarm wil sound if the transmission continues beyond the set time.The transceiver will
stop transmission if this occurs. To stop the alarm, release the PTT key and the transceiver wil return to standby.
Busy Channel Lockout
The function can prevent interference from other transceivers using the same channel.
Battery Power Saving
If there is no signal or operation,the radio will reduce its power consumption.The battery power-saving function activates when the channel is unoccupied or has not been in operation.
Low Battery Warning
If the battery power falls to the predetermined value during transmission, the transceiver will give out a voice prompt, please charge in time
Scrambling
It is a voice encryption mode which is different from sub audio
Companding
It is a function setting which prevents the inter-channel interference.
CTCSS/DCS
The transceiver has 50 CTCSS and 208 DCS, also non-standard
Special Signaling
Special Signaling refers to the CDCSS on the channels which is special processed codes. Only when the transceivers in the same company are programmed to the same frequency point with the same CDCSS and meanwhile special signaling is set,then they can talk to each other.
Emergency Alarm
When “Side Key” in the software is programmed to the alarm function, long press【DOWN】 key for two seconds to alarm; Press PTT key to exit.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

SAR tests are conducted using standard operating positions accepted by FCC/ISEDC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC/ISEDC that is does not exceed the exposure limit established by the FCC/ISEDC. Tests for each product are performed in positions and locations as required by the FCC/ISEDC. For body worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with and accessory designated for this product or when used with and accessory that contains no metal. To maintain compliance with FCC/ISEDC RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face. The equipment complies with FCC/ISEDC radiation exposure limits set forth for and uncontrolled environment. In order to comply with the FCC/ISEDC RF exposure requirement, the antenna installation must comply with following: Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits. Your wireless hand-held portable transceiver contains a low power transmitter. This product sends out radio frequency (RF) signals when the Push-to-Talk(PTT) button is pressed.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.