LG WV10-1410W Washing Machine

Product Information

Specifications:

• Model: WV10-1410W / WV10-1410B
• Manufacturer: LG
• Revision: Rev.02_120122
• Website: www.lg.com

Product Usage Instructions

Installation

Unpacking the Appliance:

Ensure to carefully remove the appliance from the packaging material to avoid any damage during unpacking.

Lifting the Appliance Off the Foam Base:

Follow the provided instructions to safely remove the appliance from the foam base to prevent any mishandling.

Removing the Transit Bolt Assemblies:

Before installation, make sure to remove the transit bolt assemblies as they are only for transportation purposes and can damage the machine if not removed.

Operation

Operation Overview:

Understand the basic operation of the washing machine before use to ensure proper functionality and performance.

Using the Appliance:

Follow the guidelines in the manual for loading clothes, selecting wash cycles, and operating the machine efficiently.

Control Panel:

Familiarize yourself with the control panel features to utilize all functions and settings effectively.

FAQs

• Q: How do I clean the washing machine?
  • A: To clean the washing machine, run a cleaning cycle with a washing machine cleaner or a mixture of vinegar and baking soda.
• Q: Why is my washing machine not draining properly?
  • A: Check for clogs in the drain hose or filter. Ensure proper installation of the drain hose with the elbow bracket.

“`

global_main.book.book Page 1 Thursday, December 1, 2022 1:18 PM

OWNER’S MANUAL
WASHING MACHINE

ENGLISH

Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.

WV10-1410W / WV10-1410B

MFL71852948 Rev.02_120122

www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.

global_main.book.book Page 2 Thursday, December 1, 2022 1:18 PM

TABLE OF CONTENTS

This manual may contain images or content that may be different from the model you purchased.
This manual is subject to revision by the manufacturer.

global_main.book.book Page 5 Thursday, December 1, 2022 1:18 PM

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into WARNING’ andCAUTION’ as described below.
Safety Messages
This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.
WARNING
WARNING
To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:
Technical Safety · This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

global_main.book.book Page 6 Thursday, December 1, 2022 1:18 PM
6 SAFETY INSTRUCTIONS
· Children should be supervised to ensure that they do not play with the appliance.
· If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
· Use a new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage.
· Ventilation openings must not be obstructed by a carpet. · This appliance is intended to be used in household only. · The inlet water pressure must be between 100 kPa and 800 kPa. · Potentially there could be hydrogen built-up in hot water system that
has not been used for two weeks or more. In this instance, hot water faucets should be allowed to run for several minutes prior to use of the washing machine.
Maximum Capacity The maximum capacity in some cycles for dry clothes to be washed is 10 kg. The recommended maximum capacity for each washing programme may differ. To get good wash results, please refer to Programme Table in OPERATION chapter for further details.
Installation · This appliance should only be transported by two or more people
holding the appliance securely. · Do not install the appliance in a damp and dusty place. Do not install
or store the appliance in any outdoor area, or any area that is subject to weathering conditions such as direct sunlight, wind, rain, or temperatures below freezing. · Make sure the power plug is completely pushed into the power outlet. · Do not plug the appliance into multiple outlet sockets, power boards, or an extension power cable.

ENGLISH

global_main.book.book Page 7 Thursday, December 1, 2022 1:18 PM
SAFETY INSTRUCTIONS 7
· Do not modify the power plug provided with the appliance. If it does not fit the power outlet, have a proper outlet installed by a qualified electrician.
· This appliance is equipped with a power cord having an equipmentearthing / grounding conductor (earthing pin) and a grounding power plug. The power plug must be plugged into an appropriate outlet socket that is installed and earthed / grounded in accordance with all local codes and ordinances.
· Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.
Operation
· Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
· Do not apply any sharp objects to the control panel in order to operate the appliance.
· Do not attempt to separate any panels or disassemble the appliance. · Do not repair or replace any part of the appliance. All repairs and
servicing must be performed by qualified service personnel unless specifically recommended in this Owner’s Manual. Use only authorized factory parts. · Do not push down the door excessively, when the appliance door is open. · Do not put animals, such as pets into the appliance. · Do not wash any items that are specified by the manufacturer as not washable on the care label. · Keep the area underneath and around the appliance free of combustible materials such as lint, paper, rags, chemicals, etc. · Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.

global_main.book.book Page 8 Thursday, December 1, 2022 1:18 PM
8 SAFETY INSTRUCTIONS
· Do not put in, wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as waxes, wax removers, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, petrol, spot removers, turpentine, vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can cause fire or explosion.
· Do not use or store flammable or combustible substances (ether, benzene, alcohol, chemical, LPG, combustible spray, gasoline, thinner, petroleum, insecticide, air freshener, cosmetics, etc.) near the appliance.
· Never reach into the appliance while it is operating. Wait until the drum has completely stopped.
· Do not touch the door during a high temperature programme.
· In case of a water leak from the appliance or flood, disconnect the power plug and contact the LG Electronics customer information centre.
· Turn off water taps to relieve pressure on hoses and valves and to minimize leakage if a break or rupture should occur. Check the condition of the fill hoses; they should be replaced after 5 years.
· If there is a gas leakage (isobutane, propane, natural gas, etc.) within the home, do not touch the appliance or power plug and ventilate the area immediately.
· If the drain hose or inlet hose is frozen during winter, use it only after thawing.
· Keep all washing detergents, softener and bleach away from children.
· Do not touch the power plug or the appliance controls with wet hands.
· Do not bend the power cable excessively or place a heavy object on it.
· Avoid touching any water that is drained from the appliance during the wash.
· Make sure that drainage is working properly. If water is not drained properly, your floor may get flooded.

ENGLISH

global_main.book.book Page 9 Thursday, December 1, 2022 1:18 PM
SAFETY INSTRUCTIONS 9
· When the air temperature is high and the water temperature is low, condensation may occur and thus wet the floor.
· Wipe off dirt or dust on the contacts of the power plug.
Maintenance · Disconnect the appliance from the power supply before cleaning the
appliance. Setting the controls to the OFF or stand by position does not disconnect this appliance from the power supply. · Securely plug the power plug in the outlet socket after completely removing any moisture and dust. · Do not spray water inside or outside the appliance to clean it. · Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the outlet socket. · Only qualified service personnel from LG Electronics service centre should disassemble, repair, or modify the appliance. Contact an LG Electronics customer information centre if you move and install the appliance in a different location.
Disposal · Before discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse. · Dispose of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause suffocation. · Cut off the power cord and remove the door before disposing of this appliance to avoid the danger of children or small animals getting trapped inside.

global_main.book.book Page 10 Thursday, December 1, 2022 1:18 PM

INSTALLATION

INSTALLATION
Parts and Specifications

NOTE
· Appearance and specifications may change without notice to improve the quality of the appliance.

Front View

Rear View

a Control Panel b Detergent Dispenser Drawer c Drum d Door e Cover Cap f Drain Plug g Drain Pump Filter h Levelling Feet

a Power Plug b Transit Bolts c Drain Hose

ENGLISH

global_main.book.book Page 11 Thursday, December 1, 2022 1:18 PM

Specifications

INSTALLATION 11

Power Supply Product Weight Dimension(mm)

Model W

WV10-1410W / WV10-1410B 220240 V~, 50 Hz 70 kg
D” D’ D

H

W

600

D

565

D”

1100

H

850

D’

620

global_main.book.book Page 12 Thursday, December 1, 2022 1:18 PM
12 INSTALLATION
Accessories

Cold Supply Hose Spanner

Anti­slip Sheets*1 Elbow Bracket for Securing Drain Hose

Caps for Covering Transit Bolt Holes

Tie Strap*1

*1 The included accessories vary depending on the model you purchased.

global_main.book.book Page 13 Thursday, December 1, 2022 1:18 PM

ENGLISH

INSTALLATION 13

Installation Place Requirements
Before installing the appliance, check the following information to make sure that the appliance should be installed in a correct place.
Installation Location
· This appliance must be installed on firm flooring to minimize vibration during the spin cycle. Concrete flooring is best, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface.
· If it is impossible to avoid positioning the appliance next to a gas cooker or coal burning stove, an insulation (850 X 600 mm) covered with aluminum foil on the side facing the cooker or stove must be inserted between the two appliances.
· Ensure that when the appliance is installed, it is easily accessible for an engineer in the event of a breakdown.
· When installing the appliance, adjust all four feet using the transit bolt spanner provided to ensure the appliance is stable.
· Ensure that there is enough room for full opening of the appliance door.
· To ensure sufficient clearance for water inlet hoses, drain hose and airflow, allow minimum clearances of at least 20 mm at the sides and 100 mm behind the appliance. Be sure to allow for wall, door, or floor moldings that may increase the required clearances.
B

Index B C

Clearance (mm) 5 20

WARNING
· This appliance must only be used for domestic
household purposes and should not be used in mobile applications.

Wooden Floors (Suspended Floors)
When installing the appliance on wooden floors, use rubber cups to reduce excessive vibration and unbalance. Timber or suspended type flooring may contribute to excessive vibration and unbalance, errors and malfunction.

· To reduce vibration, we recommend placing at
least 15 mm thickness of rubber cups a under
each adjusting foot of the appliance, secured to at least two floor beams with screws.
· If possible, install the appliance in one of the corners of the room, where the floor is more stable.
· Fit the rubber cups to reduce vibration.

Index A

A

C

C

Clearance (mm) 100

CAUTION
· If the appliance is installed on the unstable floor (e.g. wooden floor), the warranty does not cover any damages and cost occurred due to the installation on the unstable floor.

global_main.book.book Page 14 Thursday, December 1, 2022 1:18 PM

14 INSTALLATION
NOTE
· You can purchase rubber cups (part No. 4620ER4002B) from the LG service centre.
Ventilation
· Make sure that air circulation around the appliance should not be impeded by carpets, rugs, etc.

grounded/earthed in accordance with all local codes and ordinances.
Unpacking the Appliance
Lifting the Appliance Off the Foam Base
After removing the carton and shipping material, lift the appliance off the foam base.

Ambient Temperature
· Do not install the appliance in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
· If the appliance is delivered in winter and temperatures are below freezing, place the appliance at room temperature for a few hours before putting it into operation.
Electrical Connection
· Do not use an extension cord or double adapter.
· Always unplug the appliance and turn off the water supply after use.
· Connect the appliance to an earthed socket in accordance with current wiring regulations.
· The appliance must be positioned so that the plug is easily accessible.
· Power outlet must be within 1 meter of either side of the appliance.
WARNING
· Repairs to the appliance must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local authorised LG repairer.
· The power plug must be plugged into an appropriate outlet socket that is installed and

• · Make sure the tub support a comes off with
  the base and is not stuck to the bottom of the appliance. · If you must lay the appliance down to remove
  the carton base b , always protect the side of the
  appliance and lay it carefully on its side. Do not lay the appliance on its front or back. This feature may vary depending on the model purchased.
  Removing the Transit Bolt Assemblies
  To prevent the appliance from severe vibration and breakage, remove transit bolts and retainers.

ENGLISH

global_main.book.book Page 15 Thursday, December 1, 2022 1:18 PM

INSTALLATION 15

1 Starting with the bottom two transit bolts a,
use the spanner (included) to fully loosen all transit bolts by turning them counterclockwise.

· If the appliance rocks when pushing the top plate of the appliance diagonally, adjust the feet again.
· Check whether the appliance is perfectly level after installation.

2 Remove the bolt assemblies by wiggling them
slightly while pulling them out.
3 Install the hole caps.
· Locate the hole caps b included in the
accessory pack or attached on the back.
NOTE
· Save the transit bolts and retainers for future use.
· Transport this appliance for the prevention of breakage as below: – The transit bolts are reinstalled. – The power cord is secured to the back of the appliance.

NOTE
· Timber or suspended type flooring may contribute to excessive vibration and unbalance. Reinforcement or bracing of the timber floor may need to be considered to stop or reduce excessive noise and vibration.
· Never try to level any uneven floor by putting pieces of wood, cardboard or similar materials under the appliance.
Adjusting and Levelling the Feet
When installing the appliance, the appliance should be aligned and perfectly level. If the appliance is not aligned and level properly, the appliance may be damaged or may not operate properly.
1 Turn the levelling feet as required if the floor is
uneven. · Do not insert pieces of wood etc. under the
feet.

Levelling the Appliance
Checking the Level
When pushing down the edges of the top plate diagonally, the appliance should not move up and down at all (check both directions).

global_main.book.book Page 16 Thursday, December 1, 2022 1:18 PM

16 INSTALLATION
· Make sure that all four feet are stable and resting on the floor.

3 Secure the levelling feet with the lock nuts b
by turning anti-clockwise against the bottom of the appliance.

4 Check if all lock nuts at the bottom of the
appliance are secured properly.

NOTE
· Do not install the washing machine on a plinth, stand or elevated surface unless it is manufactured by LG Electronics for use with this model.
2 Check if the appliance is perfectly level using a
spirit level a.

NOTE
· Proper placement and levelling of the appliance will ensure long, regular, and reliable operation.
· The appliance must be 100% horizontal and stand firmly in position on a hard flat floor.
· It must not `Seesaw’ across corners under the load.
· Do not let the feet of the appliance get wet. Failure to do so may cause vibration or noise.
Using Anti-Slip Sheets
This feature may vary depending on the model purchased. If you install the appliance on a slippery surface, it may move because of excessive vibration. Incorrect levelling may cause malfunction through noise and vibration. If this occurs, install the antislip sheets under the levelling feet and adjust the level.
1 Clean the floor to attach the anti-slip sheets.
· Use a dry rag to remove and clean foreign objects and moisture. If moisture remains, the anti-slip sheets may slip.

2 Adjust the level after placing the appliance in
the installation area.

global_main.book.book Page 17 Thursday, December 1, 2022 1:18 PM

INSTALLATION 17

3 Place the adhesive side a of the anti-slip
sheets on the floor.
· The most effective way is to install the antislip sheets under the front feet. If it is difficult to place the sheets under the front feet of the appliance, attach them under the rear feet.

· Cold inlet Water Temperatures over 25 °C can cause damage to clothes such as delicate Woollens
· Do not overtighten the water supply hose or use mechanical devices to tighten onto the inlet valves.
· No further backflow protection required for connection to the water inlet.
· Ensure the inlet hoses are not bent, kinked or tangled as this could cause insufficient water flow and result in a malfunction.

ENGLISH

4 Put the appliance on the anti-slip sheets.
· Do not attach the adhesive side a of anti-
slip sheets to the feet of the appliance.
NOTE
· Additional anti-slip sheets are available at LG Electronics service centre.

Checking the Rubber Seal
Two rubber seals a are supplied with the water
supply hose. They are used to prevent water leaks. Connection to taps is sufficiently tight.
· Do not use mechanical devices such as multi grips to tighten the water supply hose. Ensure that the curved end of the water supply hose is connected to the appliance.

Connecting the Water Supply Hose
Note for Connection
· Water pressure must be between 100 kPa and 800 kPa (1.0 ­ 8.0 kgf/cm²). If the water pressure is more than 800 kPa, a decompression device should be installed.
· Periodically check the condition of the water supply hose and replace the water supply hose if necessary.
NOTE
· If the water pressure is near or over 800 kPa, a water pressure reduction device should be installed to both taps.
· Exceeding 65 °C can damage some clothes.
· Temperatures below 4 °C can cause hoses to freeze and burst and unfavourable wash results due to undissolved detergent.

global_main.book.book Page 18 Thursday, December 1, 2022 1:18 PM

18 INSTALLATION

Connecting the Hose to the Water Tap
Connecting Screw-Type Hose to Tap with Thread Screw the supply hose connector onto the water supply tap.

4 Push the inlet hose c vertically upwards so
that the rubber seal within the hose can adhere completely to the tap and then tighten the hose by screwing it to the right.

Connecting One Touch Type Hose to Tap Without Thread
1 Unscrew the adapter ring plate d and loose
the 4 fixing screws.

Connecting Screw-Type Hose to Tap Without Thread
1 Loosen the 4 fixing screws a.

2 Remove the guide plate e if the tap is too large
to fit the adapter.

2 Remove the guide plate b if the tap is too large
to fit the adapter.

3 Push the adapter onto the end of the tap so
that the rubber seal is connected to be watertight. Tighten the 4 fixing screws.

3 Push the adapter onto the end of the tap so
that the rubber seal is connected to be watertight. Tighten the 4 fixing screws and the adapter ring plate.

4 Pull the connector latch plate f down, push
the inlet hose onto the adapter, and release the

ENGLISH

global_main.book.book Page 19 Thursday, December 1, 2022 1:18 PM

INSTALLATION 19

connector latch plate. Make sure the adapter locks into place.

· Make sure that the hose should not be kinked or trapped.

NOTE
· After connecting the water inlet hose to the water tap, turn on the water tap to flush out foreign substances (dirt, sand, sawdust, and etc.) in the water lines. Let the water drain into a bucket, and check the water temperature.

Installing the Drain Hose
Installing the Drain Hose with the Elbow Bracket
The drain hose should not be placed higher than 100 cm above the floor. Water in the appliance may not drain or may drain slowly. · Securing the drain hose correctly will protect the
floor from damage due to water leakage.

Connecting the Hose to the Appliance
Screw the supply hose to the water inlet valve on the back of the appliance.

105 cm

· Do not connect the hose to the hot water supply for models with one water inlet. Connect to the cold water supply only.

· If the drain hose is too long, do not force it back into the appliance. This will cause abnormal noise.

NOTE
· After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of tap for the water supply. In case that the tap is square or too big, remove the guide plate before inserting the tap into the adaptor.

global_main.book.book Page 20 Thursday, December 1, 2022 1:18 PM
20 INSTALLATION
· When installing the drain hose to a sink, secure it tightly with string.

ENGLISH

global_main.book.book Page 21 Thursday, December 1, 2022 1:18 PM

OPERATION

OPERATION

Operation Overview
Using the Appliance
Before the first wash, select the Cotton wash programme and add a half amount of the detergent. Start the appliance without clothes. This will remove possible residues and water from the drum that may have been left during manufacturing.
1 Sort clothes and load items.
· Sort clothes by fabric type, soil level, colour and load size as needed. Open the door and load items into the appliance.
CAUTION
· Before closing the door, ensure that all clothes and items are inside the tub and not overhanging on the rubber door seal where they will become caught when the door is closed. Failing to do so will cause damage to the door seal and the clothes.

· Add the proper amount of detergent to the detergent dispenser. If desired, add bleach or fabric softener to the appropriate areas of the dispenser.
3 Turn on the appliance.
· Press the Power button to turn on the appliance.
4 Choose the desired cycle.
· Press the cycle button repeatedly or turn the cycle selector knob until the desired cycle is selected.
· Now select a wash temperature and spin speed. Pay attention to the fabric care label of your clothes.
· Pressing the Start/Pause button without selecting a programme will cause the Cotton programme to begin immediately, using the default settings.
5 Begin cycle.
· Press the Start/Pause button to begin the cycle. The appliance will agitate briefly without water to measure the weight of the load. If the Start/Pause button is not pressed within a certain time, the appliance will shut off and all settings will be lost.

· Remove items from the flexible door seal gasket to prevent clothing and door seal damage.

6 End of cycle.
· When the cycle is finished, a melody will sound. Immediately remove your clothing from the appliance to reduce wrinkling. Check around the door seal when removing the load for small items that may be caught in the seal.

2 Add cleaning products or detergent and
softener.

global_main.book.book Page 22 Thursday, December 1, 2022 1:18 PM
22 OPERATION
Control Panel
The actual control panel may differ from model to model.
Control Panel Features
Description
a Power On/Off Button
· Press this button to turn the washing machine on.
b Programme Knob
· Programmes are available according to the clothes type. · The lamp will light up to indicate the selected programme.
c Start/Pause Button
· This button is used to start the wash cycle or pause the wash cycle. · If a temporary stop of the wash cycle is needed, press this button.
d Extra Options and Functions
· To use the extra functions, press and hold the corresponding button for 3 seconds. The corresponding symbol lights up in the display.
· This allows you to select an additional programmes and will light when selected. Remote Start With the LG ThinQ app, you can use a smartphone to control your appliance remotely. · In order to use this function, refer to SMART FUNCTIONS. Wi-Fi Press and hold the Delay End button for 3 seconds to initiate the connection of the appliance to the LG ThinQ application.

ENGLISH

global_main.book.book Page 23 Thursday, December 1, 2022 1:18 PM

OPERATION 23

Description
e Customizing Washing Programme Buttons
Use these buttons to adjust the water temperature or spin speed settings for the selected programme. · The current settings are shown in the display. · Press the button for that option to select other settings.
f ezDispense Buttons
· Press the Dispenser 1 or Dispenser 2 to select ezDispense function. · LED will light up to indicate the selected detergent type and amount. · When the detergent or softener is insufficient;
– In case of pressing the Power button : The LED will blink and the chime will sound. – In case of running the appliance : The LED will blink . ezDispense Nozzle Clean · Press and hold the Spin button for 3 seconds to use the ezDispense Nozzle Clean function. This function cleans residual detergent or softener in the hose connected to the ezDispense(when changing the type of detergent or softener).
g Display
· The display shows the settings, estimated remaining time, options, and status messages. When the appliance is turned on, the default settings in the display will illuminate.
· While the load weight is sensed automatically, the display on the control panel blinks.
Time and Status Display

Description
a Programme Status Indicators
· When a washing programme is running, LED for the active stage will blink, and the LEDs for the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a cycle is paused, the active stage LED will stop blinking.

global_main.book.book Page 24 Thursday, December 1, 2022 1:18 PM
24 OPERATION
Description
b AI DD · AI DD M provides the appropriate drum rotation actions after load sensing is completed. · M is activated when the Cotton, Mixed Fabric, and Easy Care programmes are selected and
operated. – If too much detergent is used, too many suds can occur and this will cause poor AI DD
performance.
c Estimated Time Remaining
· When a washing programme is selected, the default time for that programme is displayed. This time will change as options are selected.
· If the display shows -:– , then the time will be displayed after the load sensing has detected
the load size. This is normal. · The time shown is only an estimate. This time is based on normal operating conditions.
Several external factors (load weight, room temperature, incoming water temperature, etc.) can affect the actual time.
d lights up when the programme uses steam.
e G lights up when the Rinse+ option is activated.
f o lights up when the Intensive option is activated.
g f lights up when the appliance is connected to Wi-Fi network at home.
h H lights up when the programme starts and the door is locked.

global_main.book.book Page 25 Thursday, December 1, 2022 1:18 PM

ENGLISH

OPERATION 25

Preparing the Wash Load
Sort the wash load for best washing results, and then prepare the clothes according to the symbols on their care labels.
Sorting the Clothes
· Soil level (Heavy, Normal, Light): Separate clothes according to soil level. If possible, do not wash heavily soiled items with lightly soiled ones.
· Colour (White, Lights, Darks): Wash dark or dyed clothes separately from whites or light colours. Mixing dyed clothes with light clothes can result in dye transfer or discolouration of lighter clothes.
· Lint (Lint producers, Collectors): Wash separately lint producing fabrics from lint collecting fabrics. Lint producers can result in pilling and linting on the lint collectors.

NOTE
· The dashes under the symbol give you information about the type of fabric and the maximum allowance of mechanical stress.
Checking the Clothes before Loading
· To help distribute the load evenly during spinning, combine large and small items in a load.
· Do not wash single small items. Add 1-2 similar items to the load to prevent an out-of-balance load.
· Check all pockets to make sure that they are empty. Items such as nails, hair clips, matches, pens, coins and keys can damage both your appliance and clothes.

Checking the Clothes Care Label
The symbols tell you about the fabric content of your garment and how it should be washed.
Symbols on the Care Labels

Symbol

Wash / Fabric type · Normal Wash · Cotton, Mixed Fabrics · Easy Care · Synthetic, Mixed Fabrics · Special Delicate Wash · Delicates · Hand Wash Only · Wool, Silk · Do not wash

· Wash delicates (stockings, underwired bras) in a wash net.
· Close zippers, hooks and strings to make sure that these items do not snag on other clothes.
· Pre-treat dirt and stains by brushing a small amount of detergent dissolved water onto stains to help lift dirt.
Adding Detergents and Softeners
Detergent Dosage
· Detergent should be used according to the instruction of the detergent manufacturer and selected according to type, colour, soiling of the fabric and the washing temperature. Use only

global_main.book.book Page 26 Thursday, December 1, 2022 1:18 PM

26 OPERATION

detergents that are suitable for Drum (front load) type washers.
· If too many suds occur, reduce the detergent amount.
· If too much detergent is used, too many suds can occur and this will result in poor washing results or cause heavy load to the motor.
· If you wish to use liquid detergent, follow the guidelines provided by the detergent manufacturer.
· You can pour liquid detergent directly into the main detergent drawer if you are starting the wash cycle immediately.
· If you select the Pre Wash option after adding the detergent directly into the drum, the detergent may be washed away, reducing the washing performance. For best results, use the Pre Wash option with the ezDispense function. The manual dispenser cannot be used for dispensing pre-wash detergent.
· Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. For best results, avoid overdosing the detergent. Failing to do so will cause oversudsing.
· Refer to the label of the clothes, before adding the detergent and choosing the water temperature.
· Use only suitable detergents for the respective type of clothing:
– Liquid detergent is often designed for special applications, e.g. for coloured fabric, wool, delicate or dark clothes.
– Powdered detergent is suitable for all types of fabric.
– For better washing results of white and pale garments, use powdered detergent with bleach.
– Detergent is flushed from the dispenser at the beginning of the wash cycle.

· Part load: 1/2 of the normal amount. · Minimum load: 1/3 of full load.
Using the ezDispense Function
When the ezDispense function is turned on, the liquid detergent and softener are dispensed in the set amounts, at the appropriate time during the cycle. · A full detergent compartment will last for about
20 standard cycles, with the drum loaded halfway up with clothes. · The default settings are configured to dispense 42 ml of detergent and 30 ml of softener for 4-6 kg of normally soiled laundry. This can be changed using the Dispenser 1 or Dispenser 2 button. Please refer to Extra Options and Functions in OPERATION chapter for further details.
1 Slowly slide the detergent dispenser drawer
out as far as it will go.
a Liquid detergent compartment b Liquid fabric softener or Liquid detergent
compartment
2 Turn the lids on the ezDispense compartments
counterclockwise to open them.

NOTE
· Do not let the detergent harden. Doing so may lead to blockages, poor rinse performance or odour.
· Full load: According to manufacturer’s recommendation.

3 Pour the detergent and softener into their
respective compartments, up to the MAX line.

global_main.book.book Page 27 Thursday, December 1, 2022 1:18 PM

ENGLISH

OPERATION 27

· The ezDispense drawer has two compartments. Put the liquid detergent into the right hand side compartment and the liquid fabric softener or liquid detergent into the left hand side compartment. If detergent
is added to the b compartment, the fabric
softener cannot be used.
· Do not put liquid or powdered bleach, or powdered, gel or sheet type detergents into the ezDispense compartments.
· Remove any residual detergent on the outside of the ezDispense drawer before inserting it.
· Do not try to fill the compartments too quickly. Add detergent and softener slowly to avoid overflows.

CAUTION
· Close lid and cover of the compartment securely before use. If not, the detergent and softner will harden or overflow.
· Slide the detergent dispenser drawer out or in slowly and use both hands for safety. Failure to do so can damage the washer or cause the detergent or softener to leak out of the ventilation holes.
· Detergent or fabric softener left in the ezDispense compartments for an extended period may harden and fail to dispense properly.
· Do not remove the dispenser drawer while the product is in operation.
· Remove detergent/softener in the ezDispense compartments before moving or relocating the the washing machine.
· Keep the ezDispense compartment level to prevent contents from leaking.

4 After filling the compartments, insert the lids
and turn them clockwise until they are tightly closed.
· Securely close the lids to the ezDispense compartments to minimize airflow which can harden these additives and prevent them from dispensing properly. Be careful not to lose the lids.

Using the Manual Dispense Function
Add detergent to the manual dispenser.
1 Press the Dispenser 1 or Dispenser 2 button
repeatedly to turn off the ezDispense function.

5 Close the dispenser drawer slowly before
starting the cycle.
· Slamming the drawer closed may result in the detergent overflowing into another compartment or dispensing into the drum earlier than programmed.
· Be careful not to get a hand caught in the drawer while closing.
· It is normal for a small amount of water to remain in the manual dispenser compartments at the end of the cycle.

a Dispenser 1 button b Dispenser 2 button

global_main.book.book Page 28 Thursday, December 1, 2022 1:18 PM

28 OPERATION
2 Open the detergent dispenser drawer.

NOTE
· The manual dispenser cannot be used for dispensing pre-wash detergent.
· When adding detergent tablets and water softener, be sure to turn off the ezDispense function.

3 Load the laundry products into the appropriate
manual dispenser compartments.
· Use the main wash detergent compartment at the manual dispenser for powdered or liquid detergent.
· Do not place detergent sheets, tablets or packs in the manual dispenser.
· If using single-use detergent packs, place the pack in the drum before loading the laundry. Do not place liquid or powdered detergent packs in the any of the dispensers.

Manual Main Wash Detergent Compartment
This compartment holds laundry detergent for the main wash cycle. It is recommended that powdered detergent be used in this compartment.
· Liquid or powdered color-safe bleach may be added to the manual main wash compartment with detergent of the same type. Do not mix liquids and powders.
· If you use a detergent that does not dissolve easily or a detergent with high viscosity, it will leave a residue and clog the dispenser.
· Be sure to turn off the ezDispense function.

Adding Detergent Tablets
Detergent tablets can also be used when washing.
1 Open the door and put detergent tablets into
the drum before loading the clothes.

c Manual main wash detergent compartment

2 Load the clothes into the drum and close the
door.

4 Close the detergent dispenser drawer slowly
before starting the cycle. · Slamming the detergent dispenser drawer
may result in the detergent overflowing into another compartment or pouring into the tub earlier than programmed.
CAUTION
· Do not place or store laundry products, such as detergent, bleach, or liquid fabric softener, on top of your washer. These products can damage the washer’s finish and controls.

NOTE
· Do not put tablets into the dispenser.
Adding Water Softener
A water softener, such as anti-limescale can be used to cut down on the use of detergent in areas with high water hardness level. · First add detergent, and then the water softener.
Dispense according to the amount specified on the packaging.

global_main.book.book Page 29 Thursday, December 1, 2022 1:18 PM

OPERATION 29

Programme Table
Washing Programme

Cotton Description

40 (Cold to 95 )

Max. Load: Rating

Washes normally soiled clothes by combining various drum motions.

ENGLISH

Cotton Eco Description

40 (Cold to 60 )

Max. Load: Rating

Washes normally soiled clothes by combining various drum motions with less energy consumption than Cotton programme with comparable settings.

NOTE
· Programme setting with Cotton Eco, 40 , Spin 1400 option for test in accordance or in conformity with AS/NZS 2040.1 for 10 kg normally soiled cotton load.
· The test results depend on water pressure, water hardness, water inlet temperature, room temperature, type and amount of load, degree of soiling utilized detergent, fluctuations in the main electricty supply and chosen additional options.

TurboClean 39

40 (Cold to 60 )

Max. Load: 5 kg

Description

With 4 water jets operating during the wash and rinse, this washing machine can wash a half load of lightly soiled clothes for approximately 39 minutes.

Mixed Fabric Description

40 (Cold to 60 )

Max. Load: 4 kg

Washes mixed fabrics simultaneously.
· Use for various kind of fabrics except special garments (silk/delicate, sports wear, dark clothes, wool, duvet/curtains).

Easy Care Description

40 (Cold to 60 ) Washes clothes that do not need ironing after washing. · Use for Polyamide, acrylic, polyester.

Max. Load: 4 kg

Quiet Wash Description

40 (Cold to 60 )

Max. Load: 5 kg

Washes clothes with less noise and vibration than other washing programmes. · Use for lightly soiled white cotton (underwear).

Allergy Care Description

60

Max. Load: 4 kg

Helps minimise substances that cause an allergic reaction. · Use for cotton, underwear, pillow covers, bed sheets, baby wear.

global_main.book.book Page 30 Thursday, December 1, 2022 1:18 PM
30 OPERATION

Delicates Description

20 (Cold to 40 ) Washes machine-washable lingerie, sheer and lacy clothes.

Max. Load: 3 kg

Hand/Wool Description

30 (Cold to 40 )

Max. Load: 2 kg

Washes hand-washable and machine-washable delicate clothes such as washable wool, lingerie, dresses etc.
· Use detergent for machine washable woolens

Sportswear Description

40 (Cold to 40 ) Washes special garments like sports and outdoor wear. · Use for water-repellent fabric laminate used on clothing.

Max. Load: 3 kg

Quick 14 Description

20 (20 to 40 )

Max. Load: 2 kg

Washes small loads of lightly soiled clothes for approximately 14 minutes.

Duvet Description

Cold (Cold to 40 )

Max. Load: 2.5 kg (1 down duvet)

Washes large items such as bed covers, pillows, sofa covers, etc.

Tub Clean

–

–

Description

This function helps clean the inside of your appliance’s tub.

Download Cycle

–

–

Description

This programme allows you to download a new and special washing programme to your appliance with a smartphone. The default programme is Rinse+Spin.

NOTE
· For AS/ NZS standard testing, detergentshould be dissolved in 1 L of water as per clause B7.3 of standard AS/NZS2040.1 and put it in the dispenser before starting.
· Select the appropriate water temperature for chosen wash programme. Always follow garment manufacturer’s care label or instructions when washing to avoid damage to clothes.
· Select the proper wash temperature and spin speed for the desired programmes.
· Actual water temperature may differ from the declared cycle temperature.
· Neutral detergent is recommended.

ENGLISH

global_main.book.book Page 31 Thursday, December 1, 2022 1:18 PM
OPERATION 31
Extra Options
*1 This option is automatically inserted in the programme and can not be deselected.
NOTE
· Rinse+, Delay End and Add Item options can be selected for every washing programme in the table below.

Programme Cotton
Cotton Eco TurboClean
39 Mixed Fabric
Easy Care Quiet Wash Allergy Care
Delicates Hand/Wool Sportswear
Quick 14 Duvet

Steam

#

# # # #*1

Wrinkle Care

TurboClean

*1

Pre Wash

# #

#*1

Intensive

# # # # # #

Selectable Maximum Spin Speed

Programme
Cotton Cotton Eco TurboClean 39 Mixed Fabric

Default 1400 rpm 1400 rpm 1200 rpm 1000 rpm

Spin Speed Available All All
400 to 1400 rpm All

global_main.book.book Page 32 Thursday, December 1, 2022 1:18 PM
32 OPERATION

Programme
Easy Care Quiet Wash Allergy Care Delicates Hand/Wool Sportswear Quick 14 Duvet

Default 1400 rpm 800 rpm 1400 rpm 800 rpm 800 rpm 800 rpm 400 rpm 1000 rpm

Spin Speed

Available All
Up to 1000 rpm All
Up to 800 rpm Up to 800 rpm Up to 800 rpm
All Up to 1000 rpm

NOTE
· Actual maximum spin speed may vary depending on the load conditions. The values above are rounded to the nearest hundred.

global_main.book.book Page 33 Thursday, December 1, 2022 1:18 PM

ENGLISH

OPERATION 33

Extra Options and Functions
You can use the extra options and functions to customize the programmes.
Customising a Washing Programme
Each programme has default settings that are selected automatically. You may also customise these settings using these buttons.
Temp. This button selects the wash temperature for the selected programme. · Press the Temp. button until the desired setting
is lit. · Select the water temperature suitable for the
type of load you are washing. Follow the garment fabric care labels for best results.
Spin The spin intensity level can be selected by pressing this button repeatedly. · Press the Spin button to select spin speed.
NOTE
· If No of the spin level is selected, the drum of the washing machine will rotate before the drainage.
Rinse+ This function is recommended for people with detergent allergies. · Press and hold the TurboClean button for 3
seconds to add rinse once.
Intensive This function is used to wash normal and heavily soiled clothes. · Press and hold the Pre Wash button for 3
seconds.
Follow the next steps to customise a washing programme:
1 Prepare the clothes and load the drum.

2 Press the Power button.
3 Add detergent.
4 Select a washing programme.
5 Customise the washing programme (Temp.,
Spin, Rinse+ and Intensive) as necessary.
6 Press the Start/Pause button.
Only Using a Spin Function
1 Prepare the clothes and load the drum.
2 Press the Power button.
· Do not select a washing programme and do not add a detergent.
3 Press the Spin button.
4 Press the Start/Pause button.
NOTE
· If you select the washing programme, you will be unable to select a spin only. If this occurs, press the Power button twice to cycle the machine off and back on.
Using Special Options
You can customize the programmes by using the following special options: Steam Adding this option helps provide better cleaning results.
Wrinkle Care Adding this option reduces wrinkles by steaming after spin.

global_main.book.book Page 34 Thursday, December 1, 2022 1:18 PM

34 OPERATION

NOTE
· Selecting this option will tumble the clothes briefly every few minutes for up to 30 minutes after the selected programme finishes. While
this option is running, ENd appears on the
display.
TurboClean Adding this option reduces the programme time but the similar washing results will be provided.
Follow the next steps to use a special option.
1 Press the Power button.
2 Select a washing programme.
3 Change the washing programme (Temp., Spin,
Rinse+ and Intensive) as necessary.
4 To use special options,
Optional 1: Press Steam or TurboClean button. Optional 2: Press and hold Steam button for 3 seconds to select the Wrinkle Care option.
5 Press the Start/Pause button.
Using Basic Options
You can customize the programmes by using the following basic options: Pre Wash This option is recommended when washing a heavily soiled load.
1 Press the Power button.

4 Press the Start/Pause button.
Add Item You can use this option in order to add or remove clothes after the washing programme has started.
1 Press the Power button.
2 Select a washing programme.
3 Press the Start/Pause button.
4 Press the Add Item button as necessary.
5 Open the door after it unlocks itself and add or
remove necessary clothing items.
6 Close the door and press the Start/Pause
button.
NOTE
· For safety reasons, the door remains locked when the water level or temperature inside of the drum is high. It is not possible to add clothes at this time.
Delay End You can set this function so that the appliance starts automatically and finishes after a specified time interval.
1 Press the Power button.
2 Select a washing programme.
3 Press the Delay End button as necessary.
4 Press the Start/Pause button.

2 Select a washing programme. 3 Press the Pre Wash button as necessary.

NOTE
· Except for LED of the Delay End button, all LEDs on the control panel will be turned off within 20 minutes. This feature may vary depending on the model purchased.

ENGLISH

global_main.book.book Page 35 Thursday, December 1, 2022 1:18 PM

OPERATION 35

· The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, clothes and other factors.
· To cancel the function, the Power button should be pressed.
· Avoid using liquid detergent for this function.

sounds, pour the detergent into the compartment, up to the MAX line.
– If the liquid fabric softener indicator g and buttons indicator f blink and the chime
sounds, pour the fabric softener into the compartment, up to the MAX line.
· The default settings are configured to dispense the detergent of Dispenser 1 and the fabric softener of Dispenser 2.

Using the ezDispense
Use the Dispenser 1 and Dispenser 2 buttons to set up and control the ezDispense function.

Changing Dispense Level for a Single Load
1 Press the Power button.

2 Turn the knob to select the desired cycle.

3 Press the Dispenser 1 or Dispenser 2 button
to increase or decrease the dispensed amount from the set defaults.
Buttons Indicator Dispensed Amount*1

More (110%)

a Dispenser 1 button b Dispenser 2 button c Buttons indicator d Liquid detergent indicator e Link indicator (Using only liquid detergent both
compartments)
f Buttons indicator g Liquid fabric softener indicator
NOTE
· Whether the detergent or softener indicator may blink and the chime may sound, even if there is sufficient detergent or softener left to use for approximately 2 to 4 washing programmes;
– If the liquid detergent indicator d and buttons indicator c , f blink and the chime

Normal (100%)
Less (90%)
Off (0%)
*1 The default settings are configured to dispense 42 ml of detergent and 30 ml of softener for 4-6 kg of normally soiled laundry.
4 Press the Start/Pause button.

global_main.book.book Page 36 Thursday, December 1, 2022 1:18 PM

36 OPERATION

NOTE
· Use the manufacturer’s recommendations on the detergent or fabric softener package when setting the ezDispense amounts for a standard 4-6 kg load.
· Most cycles will automatically use the default amounts you have set, indicated by the Normal LED light on the Dispenser 1 and Dispenser 2 buttons.
· The Delicates, Hand/Wool, Sportswear, and Tub Clean cycles turn the ezDispense function off by default.
Changing Default Dispense Amounts
The default settings are configured to dispense 42 ml of detergent and 30 ml of softener for 4-6 kg of normally soiled laundry. Detergent should be used according to the instruction of the detergent manufacturer and selected according to type, colour, soiling of the fabric and the washing temperature.
1 Press the Power button.
2 Change default dispense amounts.
· Dispenser 1: Press and hold the Dispenser 1 button for 3 seconds.
· Dispenser 2: Press and hold the Dispenser 2 button for 3 seconds.
3 Turn the knob to increase or decrease the
amount of detergent or fabric softener. The amount is shown in the display. · The default amounts can be increased or
decreased in 1 ml increments, within a range of 9 ml to 150 ml. The amount dispensed may vary slightly depending on the model.
4 Save the default changes.
· Dispenser 1: Press and hold the Dispenser 1 button for 3 seconds.
· Dispenser 2: Press and hold the Dispenser 2 button for 3 seconds.

Using both Dispensers for Liquid Detergent
NOTE
· If you set both dispensers for liquid detergent, you can not use the liquid softener dispenser for liquid softener.
· If you want to use a liquid softener: – After the programme is finished, select Rinse+Spin (Default programme of Download Cycle) and add softener directly into the drum or into the manual main wash detergent compartment. – If you downloaded a download cycle, Rinse+Spin is not available.
Setting the Dispenser 2 for Same Liquid Detergent Dispenser
1 Press the Power button.
2 Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds.
3 Press the Dispenser 1 button to light up the b
Link indicator.
· The a Liquid detergent indicator is always
light on.
· When the b Link indicator is selected, the
Dispenser 2 button cannot be operated.
4 Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds to save the changes. Setting the Dispenser 2 for Different Liquid Detergent Dispenser
1 Press the Power button.

global_main.book.book Page 37 Thursday, December 1, 2022 1:18 PM

ENGLISH

OPERATION 37

2 Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds.
3 Press the Dispenser 2 button to light up the c
Liquid detergent indicator.

3 Press the Power button.
4 Press and hold the Spin button for 3 seconds to
clean the connected hose. When this option is
selected, dcL appears on the display.

4 Press and hold the Dispenser 1 and Dispenser
2 buttons at the same time for 3 seconds to save the changes.
Cleaning the ezDispense pumping system
Use this function to change the type of detergent or softener. This function cleans residual detergent or softener in the hose connected to the
ezDispense a (when changing the type of
detergent or softener).

5 Press the Dispenser 1 or Dispenser 2 button
to select the compartment to be cleaned up. · Both compartments can be cleaned at the
same time.
6 Press the Start/Pause button. Finishes this
function within 16 minutes.
Settings
Child Lock Use this option to disable the controls. This function can prevent children from changing cycles or operating the appliance.

NOTE
· Run this function once a month (or more often if needed) to remove detergent buildup and other residue.
· If you do not clean the ezDispense compartment, detergent or softener will be remained in the connected hose.
· Using this function may cause some foam in the drum.
1 Wash the ezDispense compartment that
needs to be cleaned. Please refer to Cleaning the Appliance Periodically in MAINTENANCE chapter for further details.
2 Fill the water in compartment to be cleaned up
to the MAX line.

NOTE
· Once this function is set, all buttons are locked except the Power button.
· When the controls are locked, [L and the
remaining time are alternatively shown on the display during the wash while this function is engaged. · Turning off the power will not reset this function. You must deactivate this function before you can access any other functions.
Locking the Control Panel
1 Turn on the power.
2 Press and hold the Delay End and Add Item
buttons at the same time for 3 seconds to activate this function.
· A beeper will sound, and CL will appear on
the display.
Unlocking the Control Panel
1 Turn on the power.

global_main.book.book Page 38 Thursday, December 1, 2022 1:18 PM
38 OPERATION
2 Press and hold the Delay End and Add Item
buttons at the same time for 3 seconds to deactivate this function.
Beep On/Off This appliance plays a melody when it starts and stops. · Press and hold the TurboClean and Pre Wash
buttons simultaneously for 3 seconds to deactivate/activate this function.

global_main.book.book Page 39 Thursday, December 1, 2022 1:18 PM

ENGLISH

SMART FUNCTIONS

SMART FUNCTIONS

LG ThinQ Application
The LG ThinQ application allows you to communicate with the appliance using a smartphone.
LG ThinQ Application Features
Communicate with the appliance from a smartphone using the convenient smart features.
Remote Start It allows you to control the appliance remotely from the LG ThinQ application.
Download Cycle You can download new and special cycles that are not included in the basic cycles on the appliance. A variety of specialty cycles specific to the appliance can be downloaded to the successfully registered appliances. Once cycle download is completed in the appliance, the appliance keeps the downloaded cycle until a new cycle is downloaded.
NOTE
· Only one downloaded cycle can be stored on the appliance at a time.

notifications on a smartphone. The notifications are triggered even if the LG ThinQ application is off.
NOTE
· If you change your wireless router, Internet service provider, or password, delete the registered appliance from the LG ThinQ application and register it again.
· The application is subject to change for appliance improvement purposes without notice to users.
· Functions may vary by model.
Installing LG ThinQ Application and Connecting an LG Appliance
Models with QR Code
Scan the QR code attached to the product using the camera or a QR code reader application on your smartphone.

Tub Clean Coach This function shows how many cycles remain before it is time to run the Tub Clean function.
Energy Monitoring This function checks the energy consumption of the recently used cycles and monthly average.
Smart Diagnosis This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use.
Settings Allows you to set various options on the appliance and in the application.
Push Alert When the cycle is complete or the appliance has problems, you have the option of receiving push

Models without QR Code
1 Search for and install the LG ThinQ application
from the Google Play Store or Apple App Store on a smartphone.

global_main.book.book Page 40 Thursday, December 1, 2022 1:18 PM

40 SMART FUNCTIONS

2 Run the LG ThinQ application and sign in with
your existing account or create an LG account to sign in.
3 Touch the add (~) button on the LG ThinQ
application to connect your LG appliance. Follow the instructions in the application to complete the process.
NOTE
· To verify the Wi-Fi connection, check that the WiFi indicator on the control panel is lit.
· The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.
· LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
· The surrounding wireless environment can make the wireless network service run slowly.
· If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to connect or installation may fail.
· If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
· The network connection may not work properly depending on the Internet service provider.
· The Wi-Fi connection may not connect or may be interrupted because of the home network environment.
· The appliance cannot be connected due to problems with the wireless signal transmission. Unplug the appliance and wait about a minute before trying again.
· If the firewall on your wireless router is enabled, disable the firewall or add an exception to it.
· The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.)
· Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer.

· If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and connect the product again.
· To disable the Wi-Fi function, press and hold the Wi-Fi button for 3 seconds. The Wi-Fi indicator will be turned off.
· To reconnect the appliance or add another user, press and hold the Wi-Fi button for 3 seconds to temporarily turn it off. Run the LG ThinQ application and follow the instructions in the application to connect the appliance.
Using the Appliance Remotely
Remote Start Use a smartphone to control your appliance remotely. You can also monitor your cycle operation so you know how much time is left in the cycle.
Using this function
1 Put the clothes into the drum.
· If desired, add bleach or fabric softener to the appropriate areas of the dispenser.
2 Press the Power button.
3 Press and hold Remote Start button for 3
seconds to enable the remote control function.
4 Start a cycle from the LG ThinQ application on
your smartphone.
NOTE
· Once this function is enabled, you can only start a cycle from the LG ThinQ smartphone application. If the cycle is not started, the appliance will wait to start the cycle until it is turned off remotely from the application or this function is disabled.
· If the door has been opened, you can not start a cycle remotely.

global_main.book.book Page 41 Thursday, December 1, 2022 1:18 PM

ENGLISH

SMART FUNCTIONS 41

Disable this function manually When this function is activated, press and hold the Remote Start button for 3 seconds.
RF Radiation Exposure Statement
This equipment shall be installed and used at a minimum distance of 20 cm from the human body.

Using LG ThinQ to Diagnose Issues
If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application.
· Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application.

Open Source Software Notice Information
To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices and other relevant documents, please visit https:// opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product.

Using Audible Diagnosis to Diagnose Issues
Follow the instructions below to use the audible diagnosis method.
· Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG ThinQ application.
1 Press the Power button to turn on the
appliance. · Do not press any other buttons.
2 Place the mouthpiece of your smartphone
close to the Power button.

Max.

Smart Diagnosis

10 mm

Use this feature to help you diagnose and solve problems with your appliance.

NOTE
· For reasons not attributable to LGE’s negligence, the service may not operate due to external factors such as, but not limited to, Wi-Fi unavailability, Wi-Fi disconnection, local app store policy, or app unavailability.
· The feature may be subject to change without prior notice and may have a different form depending on where you are located.

3 Press and hold the Temp. button for 3 seconds
or longer while holding the smartphone mouthpiece to the Power button until the data transfer is complete. · Keep the smartphone in place until the data
transfer has finished. Time remaining for data transfer is displayed.
4 After the data transfer is complete, the
diagnosis will be displayed in the application.

global_main.book.book Page 42 Thursday, December 1, 2022 1:18 PM
42 SMART FUNCTIONS
NOTE
· For best results, do not move the smartphone while the tones are being transmitted.

global_main.book.book Page 43 Thursday, December 1, 2022 1:18 PM
MAINTENANCE

MAINTENANCE

WARNING
· Unplug the appliance before cleaning to avoid the risk of electric shock. Failure to follow this warning may result in serious injury, fire, electric shock, or death.
· Never use harsh chemicals, abrasive cleaners, or solvents to clean the appliance. They may damage the finish.

ENGLISH

Cleaning After Every Wash
What to Clean
Always remove items from the washing machine as soon as the cycle is complete. Leaving damp items in the washing machine can cause wrinkling, colour transfer, and odour.
· After the wash cycle is finished, wipe the door and door seal to remove any moisture.
· Leave the door slightly open to dry the drum.
· Wipe the appliance with a dry cloth to remove any moisture.

Cleaning the Exterior
Proper care of your appliance can extend the service life.
Exterior
· Immediately wipe off any spills. · Wipe with a damp cloth and then again with a
dry cloth ensuring there is no moisture in cabinet joints or crevices. · Do not press on the surface or the display with sharp objects.
Door
· Wash with a damp cloth on the outside and inside and then dry with a soft cloth.

WARNING
· Do not attempt to separate any panels or disassemble the appliance. Do not apply any sharp objects to the control panel in order to operate the appliance.

WARNING
· Leave the door open to dry inside of the appliance only if the children are supervised at
home.

Cleaning the Appliance Periodically
Tub Clean
This is a programme to help clean the inside of the appliance by soaking, washing, rinsing and spinning.

global_main.book.book Page 44 Thursday, December 1, 2022 1:18 PM

44 MAINTENANCE

Run this function once a month (or more often if needed) to reduce build-up of detergent and softener and other residue. · If there is a bad smell or mildew inside the
appliance, run this function once a week for 3 weeks in addition to the regularly prompted intervals.
NOTE
· The tcL message will be displayed to alert to the
recommendation of operating this function.
1 Remove any clothing or items from the
appliance and close the door.

appliance. Clean the inlet filter every six months or so, or more often if the water is very hard or contains traces of limescale.
· Turn off the water supply taps to the appliance if the appliance is to be left for a certain period of time (e.g. holiday), especially if there is no floor drain (gully) in the immediate vicinity.
· 1E error message will be displayed on the
control panel when the water is not entering the detergent drawer.
1 Turn off the power and the water tap and then
unscrew the water inlet hose.

2 Open the dispenser drawer and add anti
limescale powder to the main wash compartment. · Tablets can be placed directly into the drum
as an alternative to powder.
3 Close the dispenser drawer slowly.

2 Remove the water inlet filter with small pliers
and then clean the filter using a medium bristle tooth brush.

4 Turn on the power, and then select the Tub
Clean.

5 Press the Start/Pause button to start.

6 Leave the door open to dry the inside of the
appliance completely. · When the inside of the appliance is not dried
completely, it may cause a bad smell or mildew.
WARNING
· Leave the door open to dry inside of the appliance only if the children are supervised at home.
Cleaning the Water Inlet Filter
The water inlet filter collects lime or any sediment that may be in water that is supplied to the

Cleaning the Drain Pump Filter and Performing an Emergency Water Evacuation
The drain filter collects threads and small objects that may have been accidentally left in the clothes. Make sure that the filter is clean every six months to ensure smooth running of your appliance. Allow the water to cool before cleaning the drain pump filter. Open the door in an emergency or perform an emergency water evacuation.
1 Unplug the appliance.

ENGLISH

global_main.book.book Page 45 Thursday, December 1, 2022 1:18 PM

MAINTENANCE 45

2 Open the cover cap and pull out the drain tube.
3 Remove the drain plug from the drain tube first
a, and then drain the water. Then slowly unscrew the drain pump filter b to drain the
remaining water and then proceed to remove any debris or objects from the filter.

Cleaning the ezDispense Drawer
Clean the ezDispense compartments every time you refill the detergent/softener or change to a new type of detergent/softener. Remove and clean the detergent dispenser drawer once or twice a month. Leaving detergent in the detergent dispenser drawer for an extended period or using the washing machine for a long time may cause the build-up of residue in the detergent dispenser drawer.
WARNING
· Do not spray water inside the washing machine. Doing so may cause fire or electric shock.
1 Turn off the washing machine, and unplug the
power cord.

2 Pull out the detergent dispenser drawer until it
stops.

3 Press down the disengage button a to
completely remove the drawer.

4 After cleaning the drain pump filter, carefully
reinsert the filter and screw the drain cap back in clockwise carefully to avoid cross threading and leakage. Reinsert the plug back into the drain tube and place the tube into its holder.
5 Close the cover cap.

4 Open the lids.

CAUTION
· Be careful when draining, as the water may be hot.
· Run the drum cleaning programme once a month (or more often, as needed) to remove excess detergent and other debris.

5 Clean the inserts with warm water.

global_main.book.book Page 46 Thursday, December 1, 2022 1:18 PM

46 MAINTENANCE

· Rinse the drawer in warm water to dissolve the detergent residue or softener scale.
· Use a soft cloth or brush to remove any residue.
· Do not use soap when cleaning the drawer and inserts.

9 Wipe off any moisture with a dry towel or cloth
after cleaning.
10 Reinsert the detergent dispenser drawer.

6 If the detergent or softener is hardened inside
the ezDispense compartments, remove the covers on the drawer.

7 Clean the insides of the compartments with
warm water.
· Use a soft cloth or brush to clean and to remove any residue.
· Do not use soap when cleaning the drawer and inserts.

8 Securely close the covers on the ezDispense
compartments.

global_main.book.book Page 47 Thursday, December 1, 2022 1:18 PM
TROUBLESHOOTING 47
TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. It is recommended to read the tables carefully below in order to save your time and money that may cost for calling to LG Electronics service centre.

ENGLISH

Before Calling for Service
Your appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following tables before calling to LG Electronics service centre.
Error Messages

Symptoms

Possible Cause & Solution

1E
INLET ERROR

Water supply is not adequate in that location. Water does not enter appliance or it enters slowly.
· Check another tap in the house.

Water supply tap is not completely open. Water does not enter the appliance or it enters slowly.
· Open fully tap.

Water supply hose(s) are kinked. · Straighten hose or reinstall the water inlet hose.

The filter of the supply hose(s) are clogged.
· Check and clean the inlet valve filter after turning off the taps and removing the hose connections to the washing machine.

UE
UNBALANCE ERROR

The appliance has a system which detects and corrects the unbalance of the appliance.
· The clothes may be too wet at the end of the cycle, rearrange the load to allow proper spinning. Close the door and press Start/Pause button. It may take a few moments before the appliance begins to spin. The door must be locked before spin can be achieved.

Load is too small. This system may stop spinning or even interrupt the spin cycle altogether if individual heavy articles (e.g. bath mat, bath robe, etc.) are loaded.
· Add 1 or 2 similar items or smaller articles of clothes to help balance the load. Close the door and press Start/Pause button. It may take a few moments before the appliance begins to spin. The door must be locked before spin can be achieved.

OE
WATER OUTLET ERROR

Drain hose is kinked or clogged. Water in the appliance does not drain or drains slowly.
· Clean and straighten the drain hose.

global_main.book.book Page 48 Thursday, December 1, 2022 1:18 PM

 TROUBLESHOOTING

Symptoms

Possible Cause & Solution

OE

The drain filter is clogged.

WATER OUTLET ERROR · Check and clean the drain filter.

dE dE1 dEz dE4
DOOR ERROR

Door sensor malfunctions.
· Please call LG service centre. You can find your local LG service centre phone number in the warranty card.

tE
CONTROL ERROR

This is a control error. · Unplug the power plug and call for service.

LE

Over load in motor.

MOTOR LOCKED ERROR · Let the appliance wait for 30 minutes until the motor is cooled down and then, restart the cycle.

FE
OVERFLOW ERROR

Water overfills due to a possible faulty water valve. · Close the water tap. Unplug the power plug. Call for service.

PE
PRESSURE SENSOR ERROR

Water level sensor malfunctions. · Close the water tap. Unplug the power plug. Call for service.

vs
VIBRATION SENSOR ERROR

Vibration sensor malfunctions. · Call for service.

FF
FROZEN FAILURE

Is supply/drain hose or drain pump frozen?
· Supply warm water into the drum in order to unfreeze the drain hose and the drain pump. Cover the supply hose with wet and warm towel.

AE
WATER LEAKAGE

Water leaks. · Call for service.

PF
POWER FAILURE

Power failure or inadequate electrical service may have occurred during operation.
· Press the Start/Pause button to restart the cycle.

ezDispense Error Messages

Symptoms
E d1
ezDispense ERROR 1

Possible Cause & Solution
The amount of liquid detergent in the detergent compartment did not decrease. After putting the detergent into the detergent compartment, it was left for a long time and the detergent hardened.
· Clean the detergent compartment thoroughly, fill it with liquid detergent,
install it in the drawer, and run a wash cycle. If E d1 is displayed
continuously, call for service.

ENGLISH

global_main.book.book Page 49 Thursday, December 1, 2022 1:18 PM
TROUBLESHOOTING 49

Symptoms
E dz
ezDispense ERROR 2
E d3
ezDispense ERROR 3
E d4
ezDispense ERROR 4
E ds
ezDispense ERROR 5
O PN
ezDispense OPEN ERROR

Possible Cause & Solution
The amount of liquid detergent in the detergent compartment did not decrease. · Call for service.
The amount of fabric softener in the liquid fabric softener or liquid detergent compartment did not decrease. After putting the fabric softener into the liquid fabric softener or liquid detergent compartment, it was left for a long time and the fabric softener hardened. · Clean the liquid fabric softener or liquid detergent compartment
thoroughly, fill it with liquid fabric softener, install it in the drawer, and run
a wash cycle. If E d3 is displayed continuously, call for service.
The amount of liquid fabric softener in the liquid fabric softener or liquid detergent compartment did not decrease. · Call for service.
The amount of liquid detergent or fabric softener in the liquid fabric softener or liquid detergent compartment did not decrease. · Call for service.
The washer was operated without completely closing the drawer. The drawer was opened during the washer operation.
· Push the drawer completely closed. If O PN is displayed continuously, call
for service.

Noises You Might Hear

Symptoms Rattling and clanking noise Thumping sound
Vibrating noise

Possible Cause & Solution
Foreign objects, such as keys, coins, or safety pins may be in the drum. · Stop the appliance, check the drum for foreign objects. If the noise
continues after the appliance is restarted, call for service.
Heavy clothes may produce a thumping sound. This is usually normal. · If the sound continues, the appliance is probably out of balance. Stop and
redistribute the clothes.
The clothes may be out of balance. · Pause the programme and redistribute the clothes after the door unlocks.
Package materials are not removed. · Remove package materials.
The clothes may be unevenly distributed in the drum. · Pause the programme and redistribute the clothes after the door unlocks.

global_main.book.book Page 50 Thursday, December 1, 2022 1:18 PM
50 TROUBLESHOOTING

Symptoms Vibrating noise

Possible Cause & Solution
Not all levelling feet are resting firmly and evenly on the floor. · See the Levelling the Appliance instruction to adjust the levelling of the
appliance.
Floor not rigid enough. · Check if the floor is sold and does not flex. See the Installation Place
Requirements to select the proper location.

Operation
Symptoms Water is leaking.
Appliance does not operate.

Possible Cause & Solution
House drain pipes are clogged. · Unclog waste pipes. Contact plumber if necessary.
Leakage is caused by improper installation of drain hose or clogged drain hose. · Clean and straighten the drain hose. Check and clean the drain filter
regularly.
Drain pump filter cap is not fitted correctly. · Refit the drain pump filter.
Control panel has powered off due to inactivity. · This is normal. Press the Power button to turn the appliance on.
Appliance is unplugged. · Make sure that the cord is plugged securely into a working outlet.
Water supply is turned off. · Turn the water supply tap completely.
Controls are not set properly. · Make sure that the programme is correctly set. Close the door and press
the Start/Pause button.
Door is open. · Close the door and make sure that nothing is caught under the door
preventing it from closing completely.
Circuit breaker/fuse is tripped/blown. · Check house circuit breakers/fuses. Replace fuses or reset breaker. The
appliance should be on a dedicated branch circuit. The appliance will resume the programme where it stopped once power is restored.
Control needs to be reset. · Press the Power button, then reselect the desired programme and press
the Start/Pause button.

global_main.book.book Page 51 Thursday, December 1, 2022 1:18 PM
TROUBLESHOOTING 51

ENGLISH

Symptoms

Possible Cause & Solution

Appliance does not operate.

Start/Pause was not pressed after a programme was set.
· Press the Power button, then reselect the desired programme and press the Start/Pause button. The appliance is turned off if the Start/Pause button is not pressed within a certain time.

Extremely low water pressure.
· Check another tap in the house to make sure that household water pressure is adequate.

Appliance is heating the water or making steam.
· The drum may stop operating temporarily during certain cycles, while water is safely heated to a set temperature.

Appliance stops for a few minutes and then restarts.

A motor protection device has been activated to prevent overheating of the motor.
· This is normal. If the motor protection device is activated, the appliance will stop for a few minutes and then start again.

Buttons may not function properly.

The Child Lock option is activated. · Deactivate the Child Lock option if necessary.

Door does not open.

The door cannot be opened for safety reasons once the appliance starts.
· This is normal. You can safely open the door after H turns off.

Appliance is not filling Inlet filter clogged.

properly.

· Make sure the inlet filters on the fill valves are not clogged.

Inlet hoses may be kinked. · Check that inlet hoses are not kinked or clogged.

Insufficient water supply. · Make sure that both hot and cold water taps are turned on all the way.

Hot and cold supply hoses are reversed. · Check supply hose connections.

Appliance does not drain water.

Kinked drain hose. · Ensure that the drain hose is not kinked.

Drain located higher than 1 m above the floor.
· Make sure that the drain hose is no higher than 1 m above the bottom of the appliance.

Detergent is not dispensed completely or not dispensed at all.

Too much detergent is used. · Follow the guidelines provided by the detergent manufacturer.
Drain Pump Filter may be blocked. · Clean the Drain filter.

global_main.book.book Page 52 Thursday, December 1, 2022 1:18 PM
52 TROUBLESHOOTING

Symptoms Cycle time is longer than usual.
Cycle end is delayed

Possible Cause & Solution
The load is too small. · Add more items to allow the appliance to balance the loads.
Heavy articles are mixed with lighter items. · Always try to wash articles with similar weight in order to allow the
appliance to evenly distribute the weight of the load for spinning.
The load is out of balance. · Manually redistribute the load if articles have become tangled.
Unbalance is detected or suds removing programme is on. · This is normal. The time remaining shown on the display is only an
estimated duration. Actual time may vary.

Performance
Symptoms Poor stain removal Staining
Wrinkling

Possible Cause & Solution
Previously set stains. · Articles that have been previously washed may have stains which have
been set. These stains may be difficult to remove and may require hand washing or pre-treating to aid in stain removal.
Bleach or softener is dispensed too soon. · Dispenser compartment is overfilled. It makes bleach or softer dispensed
rapidly. Always measure bleach or softener to prevent overfilling. · Close the detergent dispenser slowly.
Bleach or softener was added directly to the clothes in the drum. · Always use the detergent dispenser to ensure that bleach or softener is
properly dispensed at the right time in the programme.
Clothes were not properly sorted. · Always wash dark colours separately from light colours and whites to
prevent discoloration. · Never wash heavily soiled items with lightly soiled items.
Appliance is not unloaded promptly. · Always remove items from the appliance as soon as the programme is
complete.
Appliance is overloaded. · The appliance can be fully loaded, but the drum should not be tightly
packed with items. The door of the appliance should be closed easily.

global_main.book.book Page 53 Thursday, December 1, 2022 1:18 PM
TROUBLESHOOTING 53

Symptoms Wrinkling

Possible Cause & Solution
Hot and cold water supply hoses are reversed. · Hot water rinse can set wrinkles in garments. Check the supply hose
connections.
Spin speed may be too high. · Set the spin speed to suit the garment type.

ENGLISH

Odour
Symptoms Musty or mildewy odour in appliance

Possible Cause & Solution
Inside of drum is not cleaned properly. · Run the Tub Clean function regularly.
Odours can occur if the drain hose is not properly installed, causing siphoning (water flowing back inside of the appliance). · When installing the drain hose, make sure that it does not get kinked or
blocked.
If the detergent dispenser is not cleaned regularly, odours can occur from mold or foreign substances. · Remove and clean the detergent dispenser, especially the top and bottom
of the dispenser’s opening.

ezDispense

Symptoms

Possible Cause & Solution

Refill Alarm continues to display when detergent/softener is added.

Detergent/softener has built up on the fluid level sensor.
· Open the compartment covers and clean the insides of the ezDispense compartments with warm water. Use a soft brush to remove any residue. If the Refill Alarm is displayed continuously, call for service.

The amount of detergent/softner is not enough for the sensor to detect. · Fill the detergent/softner up to the MAX line in the compartment.

Too much/too little detergent or softener dispensed.

The default dispense amounts setting may need to be changed. · Check and change the default dispense amounts setting.

The ezDispense doesn’t dispense detergent/ softener.

The ezDispense function is off. · Turn on the ezDispense function.
The ventilation holes are blocked. · Clean the ventilation holes for the lids on the compartments with warm
water.

global_main.book.book Page 54 Thursday, December 1, 2022 1:18 PM
54 TROUBLESHOOTING

Symptoms

Possible Cause & Solution

The ezDispense doesn’t dispense detergent/ softener.

The detergent or softener in the ezDispense compartments has hardened.
· Clean the ezDispense compartments and change the detergent or softener.

There’s foam on the rinsing course, and there’s detergent left on the clothes after the washing.

Detergent was used when rinsing.
· Please make sure that the detergent/softner is stored correctly. (right: detergent / left: softener)

After the washing, there’s a scum on the cloth.

You need to clean the inside of the ezDispense system.
· When using both dispensers for liquid detergent, make sure to run the ezDispense Nozzle Clean in advance.

Detergent, softener leaks from the lid of the ezDispense compartments.

You need the ezDispense compartment’s horizontal maintenance. · Leakage occurs when the ezDispense compartment is tilted. Slide the
ezDispense compartment out or in slowly and use both hands for safety.
The lid isn’t fully closed. · Securely close the lids to the ezDispense compartments. Be careful not to
lose the lids.

Wi-Fi

Symptoms
Your home appliance and smartphone are not connected to the Wi-Fi network.

Possible Cause & Solution
The password for the Wi-Fi that you are trying to connect to is incorrect. · Find the Wi-Fi network connected to your smartphone and remove it, then
register your appliance on LG ThinQ.
Mobile data for your smartphone is turned on. · Turn off the Mobile data of your smartphone and register the appliance
using the Wi-Fi network.
The wireless network name (SSID) is set incorrectly. · The wireless network name (SSID) should be a combination of English
letters and numbers. (Do not use special characters).
The router frequency is not 2.4 GHz. · Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4
GHz and connect the appliance to the wireless router. To check the router frequency, check with your internet service provider or the router manufacturer.

global_main.book.book Page 55 Thursday, December 1, 2022 1:18 PM
TROUBLESHOOTING 55

Symptoms
Your home appliance and smartphone are not connected to the Wi-Fi network.

Possible Cause & Solution
The distance between the appliance and the router is too far.
· If the distance between the appliance and the router is too far, the signal may be weak and the connection may not be configured correctly. Move the location of the router so that it is closer to the appliance.

ENGLISH

global_main.book.book Page 58 Thursday, December 1, 2022 1:18 PM

References

• LG Open Source
• LG Electronics & Home Appliances | Shop Now | LG USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>