amazon basics B0C2YNLL16 Cordless Vacuum Cleaner with Brushless Motor User Manual
- May 15, 2024
- amazon basics
Table of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Battery Warnings
- Intended Use
- Appliance Description
- Before First Use
- Charging the Appliance
- Mounting the Wall Bracket
- Operation
- Cleaning and Maintenance
- Frequently Asked Questions
- FCC – Supplier’s Declaration of Conformity
- Canada IC Notice
- Battery Disposal
- Specifications
- Feedback and Help
- Documents / Resources
Cordless Vacuum Cleaner with Brushless Motor
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions carefully and retain them for future use. If this
appliance is passed to a third party, then these instructions must be
included.
When using electrical appliances, basic safety precautions should always be
followed including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
WARNING
To reduce the risk of fire, electric shock or injury:
- Do not use outdoors or on wet surfaces.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children.
- Use only as described in this manual. Use only manufacturer’s recommended attachments.
- Do not operate the appliance or charger if it has been damaged in any way. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not pull or carry the charger by its cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
- Do not unplug by pulling on the charger cord. To unplug, grasp the plug, not the cord.
- Do not handle the charger or appliance with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Use extra care when cleaning on stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- The suction tube contains electrical wires. Do not use when damaged, cut, or punctured. Avoid picking up sharp objects.
- Always turn off this appliance before connecting or disconnecting either suction tube or motorized brush.
- Do not pick up anything that is burning or smoking. such as cigarettes. matches. or hot ashes.
- Do not use without the filters in place.
- Do not vacuum up any water, liquid or damp dirt.
- Never use any of the nozzle or brush on people, animals or plants.
- This appliance contains no user serviceable parts and requires little maintenance. Leave any servicing or repairs to qualified personnel only.
- Do not attempt to repair the appliance yourself. In case of malfunction, repairs are to be conducted by qualified personnel only.
- Do not open the appliance housing. Do not insert any foreign objects into the inside of the housing.
- Never use accessories which are not recommended by the manufacturer. They could pose a safety risk to the user and might damage the appliance. Only use original parts and accessories.
- Do not use the appliance during charging.
- The built-in LEDs of this appliance are not replaceable. However, when the LEDs reach their end of life, it does not affect the function of the product. Continue to use the product as normal.
- Do not look directly at the LEDs during use.
Battery Warnings
WARNING
Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/ or serious injury.
- Prevent unintentional starting. Ensure the power switch is in the off-position before picking up or carrying the appliance. Carrying the appliance with your finger on the power switch or energizing the appliance that has the power switch on invites accidents.
- Make sure the power switch is off before clearing jammed material, making adjustments, changing accessories, storing or servicing the appliance. Unexpected actuation of the appliance while clearing jammed material or servicing may result in serious personal injury.
- Recharge only with the charger specified by the manufacturer (model: MC2805A). A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266 °F (130 °C) may cause explosion.
- Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions (i.e. 32 to 113 °F/ 0 to 45 °C). Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Do not modify or attempt to repair the appliance except as indicated in the instructions for use and care.
- This appliance contains battery that is only replaceable by qualified personnel.
- Before disposal, the battery must be removed from the appliance. Contact qualified professional.
- Do not leave the battery charging for a prolonged period of time when the appliance is not in use.
- If the appliance appears to be bulging or shows other undesirable phenomena (e.g. excess noise), stop using the appliance immediately.
- Do not cover the appliance while charging the battery.
- Charge the appliance in a well‑ventilated environment.
- When in long term storage, charge the battery once every 3 months to avoid shortening its life.
- Batteries produce heat when charging and discharging. If the appliance becomes too hot to touch, switch the appliance off and unplug immediately.
- Charge the appliance only with the charger included. The maximum rating should not exceed 22.2 V ****0.5 A.
- If the battery leaks, avoid contact with skin and eyes. Rinse affected areas immediately with plenty of clean water, then consult a doctor.
For Household Use Only
SAVE THESE INSTRUCTIONS
Intended Use
- This appliance is intended for dry vacuuming only. It is suitable for hard floors, carpets, furniture and similar surfaces.
- This appliance is intended for household use only.
- This appliance is intended to be used in dry indoor areas only.
Appliance Description
A Battery level indicators
B Mode button
C button (on/off)
D Main unit
E Dust container
F Lid release button
G Dust container release button
H Foam filter
I HEPA filter
J Charging socket
K Suction tube
L Upholstery brush
M Crevice tool
N Motorized brush
O LED front lights
P Charger
Q Screw, x2
R Wall plug, x2
S Wall bracket
Before First Use
DANGER Risk of suffocation!
Keep any packaging materials away from children and pets – these materials are
a potential source of danger, e.g. suffocation.
- Remove all the packing materials.
- Remove and review all components before use.
- Check the appliance for transport damages.
- We recommend to fully charge the appliance before first use.
Charging the Appliance
NOTICE
- Fully charge the appliance before using it for the first time. It takes about 4 to 5 hours to fully charge the appliance.
- Charge the appliance when the suction power is noticeably weaker or the minimum battery level indicator (A) keeps flashing.
- Connect the cord of the charger (P) to the charging socket (J).
- Connect the plug of the charger (P) to a suitable outlet. The battery level indicators (A) keep flashing until charging has finished.
- Allow 4 to 5 hours to fully charge the appliance completely until all 3 battery level indicators (A) stay on.
- Disconnect the charger (P) from the charging socket (J) and from the outlet.
Mounting the Wall Bracket
DANGER Risk of electric shock!
Do not drill into any pipes or power lines beneath the surface during mounting
holes preparation. Use voltage/metal detector before drilling any holes to
eliminate any such potential risks. NOTICE
- This wall bracket (S) should be mounted only by an adult. If in doubt, consult a professional.
- Before mounting, determine the suitable mounting location. The wall bracket (S) must be fixed to a wooden or masonry/ concrete wall using fasteners that are appropriate for the mounting surface. Do not install on drywalls, wall boards or thin plywood. The mounting surface must be capable of supporting the weight of the appliance.
- Do not hang anything other than the appliance on the wall bracket (S).
- Mount the wall bracket (S) on a suitable location near a suitable outlet for charging the appliance.
Tools needed:
- Mark the positions of the screw holes at the desired height (Fig. 2).
- Drill the holes. Insert the wall plugs (R) for concrete walls (Fig. 3).
- Mount the wall bracket (S) on the wall with the 2 screws (Q) using a screwdriver (not included) (Fig. 4).
- Hang the appliance on the wall bracket (S) by engaging the hook with the slot on the main unit (D) (Fig. 5).
Operation
8.1 Accessories function
Motorized accessories
Suction tube (K)
CAUTION Risk of damage!
The electrical socket and plates of both ends of the suction hose (K) must
always be free of dirt or stray conductive materials.
In the event of a short circuit in the electrical socket, the appliance will
cease to function and may even result in irreparable damage.
- Suitable for floor cleaning and hard-to-reach areas.
- Assemble the suction hose (K) between the main unit (D) and the desired brush or nozzle (L/ M/ N).
- It is not recommended to use the suction hose (K) for cleaning carpeted stairs, upholstery or car seats.
Motorized brush (N)
CAUTION Risk of damage!
The electrical socket of the motorized brush (N) must always be free of dirt
or stray conductive materials. In the event of a short circuit in the
electrical socket, the appliance will cease to function and may even result in
irreparable damage.
- Suitable for all normal cleaning of carpets, rugs and hard flooring.
- Suitable for cleaning walls and ceilings at head height.
- The motorized brush (N) is equipped with LED front lights (O) for additional light on the working surface.
Non-motorized accessories
Upholstery brush (L)
- Suitable for cleaning window blinds, shelves, upholstery and wooden surfaces.
- Press the unlock button and pull to extend (Fig. 6), if needed.
- Suitable for cleaning in folds, crevices or corners.
- Suitable for hard-to-reach areas, such as behind furniture and between and under car seats.
8.2 Attaching accessories
CAUTION Risk of damage!
The electrical socket on the main unit (D) constantly carries a voltage of
22.2 V
- It is important to take precautions to prevent any short circuit caused by conductive materials when the socket is not in use:
- Avoid contact between conductive materials, such as metal objects or liquids, and the exposed pins of the electrical socket.
- Keep the area around the electric socket clean and free from dust or debris that could potentially cause a short circuit.
NOTICE The appliance can be used with or without suction hose (K). For
extra reach, attach the suction hose (K) in between the accessory (L/ M/ N)
and the main unit (D) (Fig. 7).
8.3 Detaching accessories
NOTICE Press the release button on the parts and pull to detach them from
the main unit (D) and suction hose (K) (Fig. 8).
8.4 Switching on/off
NOTICE Avoid blocking the air intake or exhaust vents of the appliance.
Ensure that these areas are free from any obstructions, such as dust, debris,
or fabric.
NOTICE The appliance is equipped with overheat protection for the battery
pack. It automatically shuts down when the appliance internally becomes hot.
Wait for the appliance to cool down before using again.
- Press the button (C) to switch the appliance on.
- Press the Mode button (B) to select the desired suction power (Low/ Medium/ High).
- After use, press the button (C) to switch the appliance off.
Cleaning and Maintenance
NOTICE
- Switch the appliance off before cleaning.
- During cleaning do not immerse the appliance in water or other liquids. Never hold the appliance under running water.
9.1 Cleaning
- To clean the appliance, wipe with a soft, slightly damp cloth.
- Wipe the appliance dry after cleaning.
- Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the appliance.
9.1.1 Emptying the dust container
NOTICE Empty the dust container (E) when the amount of dust has reached
the MAX marking.
NOTICE For a quick way to clear trash, hover the appliance on top of a
trash bin and press the lid release button (F) to dispose of the contents in
the dust container (E).
- Press the dust container release button (G) to detach the dust container (E) from the main unit (D) (Fig. 9).
- Hover the dust container (E) on top of a trash bin. Press the lid release button (F) to dispose of the contents in the dust container (E) (Fig. 10).
- Close the cover of the dust container (E). Refit the dust container (E) to the main unit (D).
9.1.2 Cleaning the dust container
NOTICE Empty the dust container (E) before cleaning it.
- Disassemble the filter parts from the dust container (E) (Fig. 11 and 12).
- Clean the filter parts and the dust container (E) using water and mild detergent.
- Dry the parts thoroughly before reassembling and refitting to the main unit (D).
9.1.3 Cleaning the foam filter
- Press the dust container release button (G) to detach the dust container (E) from the main unit (D) (Fig. 9).
- Remove the foam filter (H) from the dust container (E) (Fig. 13).
- Submerge the foam filter (H) in water. Add a few drops of mild detergent if needed.
- Squeeze it to allow the dirt to escape and rinse it with clean water.
- Allow it to air dry for 24 hours before refitting it to the dust container (E).
NOTICE
- Replace the foam filter (H) every 3 months or when it is heavily soiled. Replace only with the identical filter model (B0C2YN3YH4).
- The replacement foam filter (model: B0C2YN3YH4) can be purchased from Amazon website.
- The terminology used on Amazon website may differ based on the languages used in the region.
9.1.4 Cleaning the HEPA filter
-
Unlock the top cover of the main unit (D) by turning it counter-clockwise, and then take the HEPA filter (I) out (Fig. 14).
-
Tap the HEPA filter (I) gently to remove any excess dust and debris.
-
Rinse the HEPA filter (I) with cold water.
NOTICE To maintain the efficiency of the HEPA filter (I), do not rub, squeeze, or scrub it to avoid damaging the delicate fibers. -
Allow it to air dry for 24 hours before refitting it to the main unit (D).
9.1.5 Cleaning the motorized brush
NOTICE Regularly check the brush roll of the motorized brush (N) for
stubborn soiling such as trapped hair and thread.
Clean the inside of the motorized brush (N) when needed.
-
Remove the locking guard from the motorized brush (N) by pressing the locking tab down (Fig. 15).
-
Take the brush roll out (Fig. 16) and remove any threads, hair or debris tangled around the bristles with a brush.
-
Refit the brush roll and the locking guard properly afterwards.
9.2 Storage
- When storing the appliance for extended period, charge it once every 3 months.
- Store the appliance ideally in the original packaging, in a dry and dust-free area.
- Avoid areas with high humidity or extreme temperatures.
- Keep away from children and pets.
9.3 Maintenance
Any other servicing than mentioned in this manual should be performed by a
professional repair center.
Frequently Asked Questions
Problem | Solution |
---|---|
The appliance does not switch on. | The battery is low. Charge the appliance |
with the supplied charger (P).
The appliance does not operate when it is being charged. Disconnect the
appliance from the charger (P).
The appliance switches off suddenly.| The appliance overheats.
1. Clear blockages from any of the attached accessories (K/ L/ M/ N).
2. Clean the dust container (E), the filter parts and the filters (H/ I).
3. Let all parts dry thoroughly.
4. Allow the appliance to cool down for at least 30 minutes before switching
it on.
Check if there is any dirt or debris short circuiting the 22.2 V pins on
the electric sockets on the main unit (D) and on the motorized accessories (K/
O).
1. Switch the appliance off.
2. Carefully clear the dirt or debris on the 22.2 V pins on the electric
sockets.
The battery is low. Charge theappliance with the supplied charger (P).
Suction power becomes weak.| Empty and clean the dust container (E) and its
filter parts.
Clean the filters (H/ I).
Clear blockages from any of the attached accessories (K/ L/ M/ N).
Motorized brush (N) does not rotate.| Check the motorized brush (N) for debris
and clean it properly.
Motor is abnormally noisy.| Switch the appliance off and check for blockages.
Empty and clean the dust container (E) and its filter parts.
Clean the filters (H/ I).
Dust comes out from the main unit (D).| Clean the filters (H/ I).
Fit the foam filter (H) properly onto the dust container (E).
Fit the HEPA filter (I) properly onto the main unit (D).
FCC – Supplier’s Declaration of Conformity
Unique Identifier | MC2805A – Charger |
---|---|
Responsible Party | Amazon.com Services LLC. |
U.S. Contact Information | 410 Terry Ave N. Seattle,WA 98109 USA |
Telephone Number | (206) 266-1000 |
11.1 FCC Compliance Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
11.2 FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Canada IC Notice
This Class B digital apparatus complies with Canadian CAN ICES‑003(B) / NMB‑003(B) standard.
Battery Disposal
**** Do not dispose of used batteries with your household waste. Take them to
an appropriate disposal/ collection site.
To learn more about recycling batteries, visit: call2recycle.org/what-
can-i-recycle
Specifications
14.1 Appliance
Model number | V21Q01Q32226 |
---|---|
Rated voltage | 22.2 V ****250 W |
Battery type / capacity | Li-ion battery 22.2 V ****, 2.0 Ah, 44.4 Wh |
Output voltage for accessory | 22.2 V ****10 W |
Maximum noise level | approx. 81 dB(A) |
Suction power | On high setting: approx. ≥10 kPa (75 W) |
On medium setting: approx. ≥5.7 kPa (25 W)
On low setting: approx. ≥2.4 kPa (8 W)
Charging time| 4 to 5 hours
Operating time| ≥9 minutes (on high setting);
≥16 minutes (on medium setting);
≥45 minutes (on low setting)
Dust container capacity| 0.74 qt (0.7 L) (max mark: 0.4 qt (0.4 L))
14.2 Charger
Model number | MC2805A |
---|---|
Input | 100-240 V AC, 50/60 Hz, 0.5 A |
Output | 25-29 V ****,500 mA |
Protection class | II |
14.3 Motorized brush
Model number | EBT05 |
---|---|
Rated power | 22.2 V ****10 W |
Feedback and Help
We would love to hear your feedback. To ensure we are providing the best
customer experience possible, please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader: If you need help with
your Amazon Basics product, please use the website or number below.
amazon.com/gp/help/customer/contact‑us
+1 877‑485‑0385
amazon.com/AmazonBasics
MADE IN CHINA
Documents / Resources
|
amazon basics B0C2YNLL16 Cordless Vacuum Cleaner with Brushless
Motor
[pdf] User Manual
B0C2YNLL16 Cordless Vacuum Cleaner with Brushless Motor, B0C2YNLL16, Cordless
Vacuum Cleaner with Brushless Motor, Vacuum Cleaner with Brushless Motor,
Cleaner with Brushless Motor
---|---
References
- Amazon Sign In
- Amazon Iniciar sesión
- Amazon Iniciar sesión
- amazon.com/gp/help/customer/contact-us
- Amazon Sign-In
- Amazon Sign In
- Amazon Iniciar sesión
- Amazon Iniciar sesión
- Amazon Sign-In
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>