MALTA DYNAMICS C7050 Vertical Lifeline Assembly User Guide
- May 15, 2024
- MALTA DYNAMICS
Table of Contents
MALTA DYNAMICS C7050 Vertical Lifeline Assembly
Product Specifications
- Vertical Lifeline Assembly
- Key Features:
- 1. Includes Self-Locking Alloy Steel Snap Hook
- 2. 5/8 Polyester 3-Strand Rope
- 3. Built-in Rope Grab
- 4. Shock Absorption Pack
- 5. 18 Extension Lanyard
Specifications
PART # | SIZE | WEIGHT |
---|---|---|
C7050 | 50ft | 10.6 lbs. |
C7051 | 25ft | 7.3 lbs. |
C7056 | 100ft | 19.3 lbs. |
Performance Specifications
- Worker Capacity Range: 130-310 lbs. Max
- Minimum Breaking Strength : 5,000 lbs. Max
Materials Specifications
- Webbing: High-strength polyester and Nylon
- Connector: Alloy Steel
Fall Protection Standards
- ANSI Z359.1-07, A10.32-12
- OSHA 1926 Subpart M, OSHA 1910
Contact Information: 210 13th Street, Malta, OH 43758 WWW.MALTADYNAMICS.COM // 800.494.1840
Product Usage Instructions
Pre-Use Inspection:
- Before each use, inspect the lifeline assembly for any signs of wear, damage, or deterioration. Ensure all components are in good condition and functioning properly.
- Proper Attachment: Secure the self-locking alloy steel snap hook to a suitable anchorage point rated for fall arrest. Verify the connection is secure before use.
- Adjusting Length: If needed, adjust the length of the lifeline assembly to ensure proper fit and freedom of movement while working at height.
Fall Arrest Technique
Understand and practice proper fall arrest techniques. In case of a fall, the shock absorption pack will be deployed to reduce impact forces on the user.
FAQ
- Q: How often should I inspect the lifeline assembly?
- A : The lifeline assembly should be inspected before each use and periodically as recommended by safety regulations or the manufacturer.
- Q: Can the lifeline assembly be used for multiple workers simultaneously?
- A: No, the lifeline assembly is designed for single-worker use only to ensure safety and proper fall arrest protection.
introduction
VERTICAL LIFELINE ASSEMBLY
The Malta Dynamics Vertical Lifeline Assembly is a complete kit with a
collection on the strongest conventional VLA materials available in for
workers in today’s industries. The kit comes complete with a 3-strand
polyester rope that is reinforced and resistant to abrasions and heat. The
vertical lifeline assembly allows a worker to avoid the hazard of a leading
edge by tying off at a short enough length to eliminate the potential fall by
stopping the user from reaching the edge. The vertical lifeline can also be
used for fall arrest and if a fall is encountered, the kit comes equipped with
a shock absorption pack to ease the arresting force trauma on the body.
KEY FEATURES
- Includes Self-Locking Alloy Steel Snap Hook
- 5/8” Polyester 3-Strand Rope
- Built-in Rope Grab
- Shock Absorption Pack
- 18” Extension Lanyard
- Rope Terminated by Stitching with Plastic Casing
- UV Resistant Materials Remain Durable and Flexible
- Complete Assembly Includes: 2-Strand White Polyester Rope, Shock Pack, Positioning Device, and 18” Extension Lanyard
PART # | SIZE | WEIGHT |
---|---|---|
C7050 | 50ft | 10.6 lbs. |
C7051 | 25ft | 7.3 lbs. |
C7056 | 100ft | 19.3 lbs. |
PERFORMANCE SPECIFICATIONS
- Worker Capacity Range 130-310 lbs. Max
- Minimum Breaking Strength 5,000 lbs. Max
MATERIALS SPECIFICATIONS
- Webbing High- Strength Polyester and Nylon
- Connector Alloy Steel
FALL PROTECTION STANDARDS
- ANSI Z359.1-07, A10.32-12
- OSHA 1926 Subpart M, OSHA 1910
contact
- 210 13th Street, Malta, OH 43758
- WWW.MALTADYNAMICS.COM
- 800.494.1840
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>