MALTA DYNAMICS A6303 Reusable Roof Anchor User Guide
- May 15, 2024
- MALTA DYNAMICS
Table of Contents
MALTA DYNAMICS A6303 Reusable Roof Anchor
PRODUCT SPECIFICATIONS
- Product: Reusable Roof Anchor
- Part #: A6303
- Pack: 1
- Weight: 2.4 lbs.
PERFORMANCE SPECIFICATIONS
- Worker Capacity Range: 130-310 lbs.
- Minimum Breaking Strength: 5,000 lbs. Max
MATERIALS SPECIFICATIONS
- Anchor Dimensions: 21 x 3
- Material: Galvanized Steel
FALL PROTECTION STANDARDS
- OSHA 1926 Subpart M, 1910
- ANSI Z359.1:2007, A10.32-12
KEY FEATURES
- Pre-drilled hole layout for easy install
- Reliable D-Ring anchor points
- Adjustable pitch to match a variety of rooftops
PRODUCT USAGE INSTRUCTIONS
Installation Process
- Identify a suitable location on the roof for installation.
- Ensure the surface is clean and free from debris.
- Use appropriate tools to secure the roof anchor in place according to the pre-drilled hole layout.
- Verify that the anchor is securely attached before use.
Usage Guidelines
- Ensure the worker’s weight falls within the specified capacity range.
- Always inspect the anchor before each use to check for any signs of damage or wear.
- Follow all relevant fall protection standards and regulations during use.
Maintenance
Regularly inspect the roof anchor for any signs of corrosion or structural damage. Replace if any issues are identified.
FAQ
- Q: Can the roof anchor be used on all types of roofs?
- A: The adjustable pitch feature allows for compatibility with a variety of rooftops, but always ensure proper installation and compatibility with the specific roof type.
- Q : What should I do if the roof anchor shows signs of damage?
- A: Immediately discontinue use and replace the roof anchor to ensure safety during fall protection activities.
Introduction
REUSABLE ROOF ANCHOR
Trust in the high-quality fall protection systems offered by Malta Dynamics
and reap the benefits of safety and support with this Galvanized Steel
Reusable Roof Anchor on hand at your next job site. This reusable anchorage
connector is designed for temporary use on wood rooftops and fits all roof
pitches from flat to 12/12. The thick-plated, galvanized steel construction
offers a longer-lasting product life and the fall protection your workers need
with a worker capacity range of 130 to 310 lbs. This reusable roof anchor
includes all necessary fasteners and can be easily installed using screws or
nails. This reusable roof anchor meets or exceeds the safety-oriented
requirements of OSHA and ANSI.
KEY FEATURES
- Pre-drilled hole layout for easy install
- Reliable D-Ring anchor points
- Adjustable pitch to match a variety of rooftops
- Lightweight and durable
- Fasteners Included
- Can be installed with screws or nails
- Discrete and low-profile design
- Fits up to 12/12 roof pitch
- For temporary use on wood rooftops
PERFORMANCE SPECIFICATIONS
- Worker Capacity Range 130-310 lbs. Max
- Minimum Breaking Strength 5,000 lbs. Max
MATERIALS SPECIFICATIONS
- Anchor Galvanized Steel
- Dimensions 21” x 3”
FALL PROTECTION STANDARDS
- OSHA 1926 Subpart M, 1910
- ANSI Z359.1:2007, A10.32-12
contact
- 210 13th Street, Malta, OH 43758
- WWW.MALTADYNAMICS.COM
- 800.494.1840
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>