Vanbus YISCAA Bidet Attachment for Toilet Instruction Manual
- May 15, 2024
- Vanbus
Table of Contents
YISCAA
Do what Yiscaa can do
User’s Manual
YISCAA Bidet Attachment for Toilet
Pils Contact Us for More Options
STANDARD ACCESSORIES LIST
| No | Name | Qty | No | Name | Qty |
|---|---|---|---|---|---|
| ⑤ | Screw | 2 | |||
| ④ | NPT1/2 connector | 1 | ⑨ | Installation instruction | 1 |
| ③ | Decorative cover | 1 | ⑧ | 59 inch Hose | 1 |
| ② | Mixer body | 1 | ⑦ | Bidet sprayer | 1 |
| ① | Handle | 1 | ⑥ | Wrench | 1 |
Check accessories
Standard List of Accessories:
When you open the product packaging, please check whether the objects in It
are consistent with the main body and accessories you purchased. If there is
any inconsistency, please contact our company or our aistributor.
Note:
- Accessories are subject to change without prior notice if the change does not affect usage;
- The appearance of the product is subject to the physical objects you receive, and the schematic diagram Is only for reference.
INSTALLATION STEPS
This product has been inspected and debugged by the factory to the best condition. Please do not disassemble and assemble it yourself.
Before installing the Bidet Sprayer, please be sure to remove sundries and Sludge from the water pipe to prevent sundries from blocking the Bidet Sprayer.
Helpful Information Tools:
Gather the necessary tools as shown below to complete the installation of this
Bidet Sprayer.
Read all instructions before installation
Tum off hot and cold water supplies at angle stops before installing Bidet
Sprayer.
STEP 1~2
Use special tools to chisel holes on wall for installing body. Switch
on/off the cartridge, check all connectors without any leakage. Ihnen seal the
wall with tiles.
STEP 3
Put the decorative cover into the valve body first, then install NPT 1/2
thread with wrench.
STEP 4
Install the bidet sprayer nolder with the screw and wrencn.
STEP 5
Install the handle on the vaive and fix It with the screw and wrencn.
STEP 6
Finally, connect the bidet sprayer and hose.
INSTALLATION DIMENSION
| 
---|---
CLEANING CARE
In order to keep the appearance of Bidet Sprayer clean, bright and good performance, please take care of the Bidet Sprayer as follows;
- Rinse with water only and dry with soff cotton cloth;
- Use mild liquid and colorless glass cleaner to remove surface dirt and scale fim, or use polish without abrasive effect;
- Do not use abrasive deterfgent, polish, emery cloth, paper towel or scraper, etc.;
- Do not use acid cleaner, or cleaner and soap with insoluble gran etc.;
- In the process of use, mud my accumulate in the bubbler and make the water flow show, The bubbler can be unscrewed, rinsed with water, and then installed back in place.
Pls feel free to contact us if you have any questions. We will solve this in time with this email of [email protected]