enjoyedled DQ-R20 Laser Party Lights User Manual

enjoyedled DQ-R20 Laser Party Lights User Manual

Welcome

Thank you for inviting Enjoyedled into your celebrations, and into your hearts. Here’s to countless more moments of laughter, togetherness, and brilliance. If we can do anything better, we would love to hear from you, stay connected with us via support@enjoyedled.com

Safety Notes

Potential laser injury hazard exists with this product! Read the instructions carefully！
This laser light is a class1 product. It is prohibited to expose the naked eyes directly to the laser, otherwise it may injure the eyes.
It is illegal and dangerous to shine this laser into audience areas, where the audience or other personnel could get direct laser beams or bright reflections into their eyes.
It is prohibited to let the kids play with this product. Before operating this laser light, everyone must read the safety notes.
Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation. The laser power levels accessible if the unit is opened can cause instant blindness, skin burns and fires.
**** It is a US Federal offense to shine any laser on aircraft.

After setting up, and before public use, test laser to ensure proper function. Do not use if any defect is detected. Do not use if laser emits only one or two laser beams rather than dozens/ hundreds, as this could indicate damage to the diffraction grating optic, and could allow emission of higher laser levels above Class 3B.
Do not point lasers at people or animals. Never look into the laser aperture or laser beams.

Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc. Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal. Even laser reflections can be hazardous.
Never point a laser at aircraft, this is a federal offense. Never point un- terminated laser beams into the sky. Do not expose the output optic (aperture) to cleaning chemicals. Do not use laser if the laser appears to emit only one or two beams.
Do not use the laser if the housing is damaged, the housing is open, or if the optics appear damaged in any way. Never open the laser housing. The high laser power levels inside of the protective housing can start fires, burn skin and will cause instant eye injury. Never leave this device running unattended.

Installation

• Laser effects projected 3 meters (9.8 ft) above the audience are eye safe. A survey should be taken to assess the likelihood of any reflective surfaces (such as high windows, chromebars etc) bouncing stray beams back down into the audience.
• Using a fastening clamps on the light and tight to the ceiling in a strong hook. Make sure its correct power output and plug the power cable to the wall socket. Power must be in earth! Power on the light.
• Do not shoot the beams at the audience!
• Do not look directly into the laser aperture once the laser light is ON. Please pay attention to the Laser Danger Warning Label!

Cleaning Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning, the internal and external lenses should be carried out periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the out- side casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before pluggingthe unit back in. Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp beam output.

Front Cover

Rear Cover

Note:
DMX Control: The system only accepts the DMX512 signal of international standard to control the system.

Remote Control Function

automatically
Reduce Flash Speed| Accelerate Flash Speed
Reduce Sound Sensitive| Enhance Sound Sensitive
The light is synchronized with the sound. (Note: If no sound, then the light will be off)
The motor speed is synchronized with sound level. (Note: When in high sound, the motor speed is fast. In low sound, the motor speed will slowdown.)
Random Light Beam| Red Background LED On/Off
Green BackgroundLED On/Off| Blue Background LED On/Off
---|---
Pattern 1 On/Off| Pattern 2 On/Off
Pattern 3 On/Off| Pattern 4 On/Off
R/G/B/W Background LED On/Off| Red Light Beam On/Off
Green Light Beam On/Off| Blue Light Beam On/Off

Note: Different laser beam and LED light colors can be overlaid. For example, if you want mixed Red/Green/Blue Laser Light, press the “Light Beam R” + “Light Beam G” + “Light Beam B” Button once, all of them will be on. If you do not want the Red laser light, then press the “Light Beam R” button again, the red laser light will be off. The LED light works in the same way. But when in Auto model, they are NOT adjustable.

DISPLAY MENU

DMX Mode

1

|

Special channel

| 000-005  Null006-040 Self-running 1041-080 Self-running 2081-120 Self- running 3121-160 Sound Activated 1161-200 Sound Activated 2201-240 Sound Activated 3241-255  Null
2| Sound sensitivity (combined with 1-Channel Sound Activated mode)| 000-255
3| Red laser| 000-255
4| Green laser| 000-255
5| Blue laser| 000-255
6| Strobe laser| 000-000 Close001-004 open005-255 Strobe from slow to fast

7

|

Pattern

| 000-004  Null005-009 Pattern 1010-014 Pattern 2015-019 Pattern 3020-024 Pattern 4025-029 Pattern 5030-034 Pattern 6035-039 Pattern 7040-044 Pattern 8045-049 Pattern 9050-054 Pattern 10055-059 Pattern 11060-064 Pattern 12065-069 Pattern 13070-074 Pattern 14075-079 Pattern 15080-084 Pattern 16085-089 Pattern 17090-094 Pattern 18095-099 Pattern 19100-104 Pattern 20105-109 Pattern 21110-114 Pattern 22115-119 Pattern 23120-124 Pattern 24
7| Pattern| 125-129 Pattern 25130-134 Pattern 26135-139 Pattern 27140-144 Pattern 28145-149 Pattern 29150-154 Pattern 30155-159 Pattern 31160-164 Pattern 32165-169 Pattern 33170-174 Pattern 34175-179 Pattern 35180-184 Pattern 36185-189 Pattern 37190-194 Pattern 38195-199 Pattern 39200-204 Pattern 40205-209 Pattern 41210-214 Pattern 42215-219 Pattern 43220-224 Pattern 44225-229 Pattern 45230-255 Point
---|---|---
8| Pan axis starting position| 000-199 Shift left and right200-255 Auto left and right shift
9| Tilt axis start position| 000-199 Shift up and down200-255 Auto up and down shift
10| Overall rotation| 000-009  Null010-120 Forward spin fast to slow121-134  Null135-245 Reverse spin slow to fast246-255  Null
11| Flip| 000-009  Null010-120  Left and right flip, fast to slow121-134  Null135-245 Up and down flip, slow to fast246-255  Null
12| stretch and retract| 000-127 From large to small128-255 From slow to fast
13| Select the exit gratingposition| 080-119 Position 2120-159 Position 3160-199 Position 4
14| Fourth grating positionselection| 000-126 Position 0127-255 Position 1
15| Red LED Light| 000-255
16| Green LED Light| 000-255
17| Blue LED Light| 000-255
18| White LED Light| 000-255
19| Strobe LED Light| 000-000 Close001-004 Open005-255 Strobe from fast to slow

WARRANTY

We provide a 1-year warranty for this appliance. Please email our support team support@enjoyedled.com, if you have any questions, please attach your order ID in your email. We’ll get back to you as quick as possible. To get the most protection out of your warranty, please register your products within 30 days via support@enjoyedled.com. By registering and keeping your receipt, you will enjoy the products’s full warranty and should you ever need to contact the Customer Care Centre, we will be able to hep you faster. Enjoyedled will never give or sell your valuable information to anyone.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>