BUBBH50323000-GLD Paris Mirror User Guide
- May 15, 2024
- PARIS MIRROR
Table of Contents
BUBBH50323000-GLD Paris Mirror
FEATURES AND BENEFITS
- LED TECHNOLOGY
- HANGS VERTICALLY AND HORIZONTALLY
- ENERGY EFFICIENT
- CRI 90+
- DIMMABLE WITH ANY STANDARD MLV/ TRIAC DIMMER WALL SWITCH
- UL CERTIFIED
- DURABLE ( UP TO 120 000 HOURS)
- 5 YEARS WARRANTY
AVAILABLE OPTIONS
- 6000K LED
- 3000K LED
- CCT LED 2700-6000K
- RGBW LED
LIGHTING SPECIFICATION
- DIMENSIONS : 50X32 in
- WEIGHT: 48 POUNDS (LBS)
- IP RATING: 44
- INPUT VOLTAGE: 110V
- CRI: 90+
SAFETY SPECIFICATION
- ENTIRE ASSEMBLY MEETS UL/cUL STANDARDS
- INTERNATIONAL CERTIFICATIONS
- SAFETY- BACKED MIRROR
MODELS
Base model| Kelvin temperature| Dimensions|
Lumens| Power requirements
---|---|---|---|---
BUBBH50323000-GLD| 3000K| 50″W x 32″H x 1.611D
(1270mm x 813mm x 41mm)| 5930| 110 VAC, 54W
BUBBH50326000-GLD| 6000K| 50″W x 32″H x 1.611D
(1270mm x 813mm x 41mm)| 5940| 110 VAC, 54W
BUBBH5032CCT-GLD| CCT| 50″W x 32″H x 1.611D
(1270mm x 813mm x 41mm)| | 110 VAC
BUBBH5032RGBW-GLD| RGBW| 50″W x 32″H x 1.611D
(1270mm x 813mm x 41mm)| | 110 VAC
Dimension
INSTALLATION & AFTER CARE INSTRUCTIONS
- 110V HARD WIRED ELECTRICAL CONNECTION
- Z BAR INCLUDED
- MIRROR SHOULD BE CONTROLED BY AN ON/OFF WALL SWITCH
- INSTALLATION WIRING MAY BE DIFFERENT WITH MIRRORS EQUIPPED WITH ADDITIONAL OPTIONS.
Installation
All Paris Mirror backlit and LED mirrors have been independently tested for
compliance with electrical equipment (safety) regulations.
All illuminated and backlit mirrors are IP44 rated.
Illuminated mirrors have been designed and independently tested for compliance
to electrical equipment (safety) regulations, and are UL Certified.
LEDs have a life expectancy of 120,000 hours of continuous use. All LED light
fittings are replaceable and are available through Paris Mirror customer
service.
IMPORTANT: Always switch off the electrical supply at the mains during
installation and maintenance.
It is recommended that fuse is withdrawn or circuit breaker switched off
before installation begins.
Fitting in Bathrooms is subject to all regulations. It is not suitable for
product installations in Saunas, Steam Rooms, or shower cubicles, and it is
recommended for permanent installation.
Care Safety
Wear suitable eye wear protection when drilling. Use caution when using power
tools near water, beware of hidden cables or pipes.
Take care if drilling on tiled surfaces in case the drill slips. A piece of
masking tape applied to wall before marking out fixing holes will stop drill
from moving.
Cleaning & Maintenance:
It is recommended that the unit is cleaned with a soft, dry, non-abrasive
cloth when turned off.
Never use cleaning agents or abrasive material on any type of surface finish.
Do not strike glass components with hard or pointed items.
Do not place very hot or cold items against or close proximity to glass
surfaces.
12ov DIMMABLE LED DRIVER INCLUDED
- Decide on wall positional placement.
- Prepare & install wall hooks measured to distance between mirror’s anchors.
- Match & attach 3 electrical wires from mirror to home electrical wires: Live to Live, Ground to Ground, Neutral to Neutral.
- Hang and affix to wall.