boAt Airdopes Flex 454 ANC TWS Earbuds User Guide
- June 13, 2024
- Boat
Table of Contents
- Airdopes Flex 454 ANC TWS Earbuds
- PACKAGE CONTAINS:
- POWER ON (FIRST TIME USER)
- CONNECTION MODE
- SINGLE EARBUD USAGE
- CHARGING THE EARBUDS
- CHARGING THE CASE
- BASIC FUNCTIONS
- MULTI-POINT CONNECTIVITY
- FACTORY RESET
- SPECIFICATIONS
- WARNING
- TROUBLESHOOTING
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AIRDOPES
FLEX 454 ANC AIRDOPES FLEX 454 ANC
Airdopes Flex 454 ANC TWS Earbuds
Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes Flex 454 ANC. Please consider this manual as your guiding map towards the unparalleled shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.
PACKAGE CONTAINS:
- 1x Pair of TWS Earbuds
- 1x Charging Case
- 1x Type-C Charging Cable
- 2x Pairs of Extra Earmuffs
- 1x User Manual
- 1x Warranty Card
- 1x Catalogue
- 1x FAQ Card
POWER ON (FIRST TIME USER)
Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the
charging case (when earbuds are inside). Our IWP™ (Insta Wake N’ Pair)
Technology enables the earbuds to power on automatically, get connected and
enter into the connection mode
OR
Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 secs to
manually power on the earbuds
Step 2: Both the earbuds will automatically pair with each other. The earbuds
will enter into the Connection Mode indicated by white LED flashes
CONNECTION MODE
Step 3: Turn on the Bluetooth functionality on your phone/ media device & scan
Step 4: Search for ‘Airdopes Flex 454 ANC’ and pair accordingly.
Congratulations! Your earbuds are now connected successfully via Bluetooth
Note:
- Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure.
- Airdopes Flex 454 ANC remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range.
SINGLE EARBUD USAGE
Step 1: Please note that both the earbuds can be used in mono mode. Use Smart
Power On or Manual Power On for switching on the desired earbud
Step 2: The selected earbud will automatically enter the connection mode
Step 3: Turn on Bluetooth on your phone/ media device and search for ‘Airdopes
Flex 454 ANC’ to connect
Notes:
- To switch to Stereo mode, simply take out the other earbud from the case.
It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
3 Seconds Long touch both CTCs for 3 sec to manually power on
3 Seconds Right Earbud
Long touch the right CTC for 3 seconds to toggle ANC OFF/ Ambient/ ANC ON
modes
3 Taps Tap the left CTC 3 times turn on/ off BEAST (gaming) mode
5 Seconds Long touch both CTCs for 5 sec to manually power off
10 Seconds Long press the Reset Button on case for 10 sec to perform factory
reset
CHARGING THE EARBUDS
Step: Please insert the earbuds back inside the charging case in correct orientation.
Remaining Earbuds Battery | LED Indication |
---|---|
Low Battery | White blinks (3 times) when the Case lid gets opened |
Min 30%-100% | Solid white LED (3 seconds) when the Case lid gets opened |
Note:
- Before using the ear-buds for the first time, it is recommended to fully charge the ear-buds. Also, please keep the lid of the charging case closed while charging.
CHARGING THE CASE
Step: To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/ powerbank, etc.
Case RemainingBattery | Charging State | Normal (Non-Charging) State |
---|---|---|
Less than 30% | First shows the normal state, then goes into red breathing LED |
Red LED blinks 3 times upon opening the case lid
30%-70%| First shows the normal state, then goes into white breathing LED|
White LED blinks 3 times upon opening the case lid
More than 70%| First shows the normal state, then goes into Green breathing
LED| Green LED blinks 3 times upon opening the case lid
Case LED Indication about inserting earbud into the case – This is to indicate TWS is charging from the case (when lid gets closed):
- If either of the earbuds is getting charged from the case, then purple LED blinks for 5 seconds
- If both the earbuds are fully charged, blue LED for 5 seconds
BASIC FUNCTIONS
-
Ambient Mode, ANC and Normal Modes: Long touch the right CTC for 3 secs to switch among Ambient mode, ANC mode and Normal mode for music.
Ambient mode is for transparency towards the audible surroundings. By virtue of ANC mode you can cancel out the external noise and let yourself fully immerse in your playlists.
Note: The default mode is ANC OFF(Normal Mode). The order of change is ANC OFF (Normal mode) –> Ambient Mode –> ANC Mode -
Answer: Single tap the CTC on either earbud to answer incoming calls
-
Hang Up/ Reject Calls: Double tap the CTC on either earbud to end/ reject calls
-
Play/ Pause Music: Simply plug in the earbuds inside your ears to start playback; whereas, you can remove them to pause music OR
Single tap CTC on either earbud to play or pause a track -
Next Track: When playing music, double tap the right CTC to skip to the next song
-
Previous Track: When playing music, double tap the left CTC to return to the previous song
Triple tap the left CTC to switch to Low Latency mode, also known as the
BEAST™ Mode. Once switched on, it gets notified via a sound prompt. Triple tap
the left CTC once again, to turn it off and return to Music Mode.
Made for the Gamers – By Gamers, BEAST™ Mode reduces the latency significantly
and improves the overall gaming experience
AI ENx™ TECH
Our ENx™ tech algorithm cancels out the background noise so that you can be
heard crystal clear via voice calls. One need not activate ENx™ as the mics
are equipped with the same and activated by default.
Deliver your voice without interruptions anywhere – traffic, railway stations,
airports, work space; literally anywhere!
MULTI-POINT CONNECTIVITY
Airdopes Flex 454 offers multi-point connectivity feature; thereby letting you stay connected to two devices simultaneously. You can follow the below steps:
- Firstly, connect the earphone to one of the devices.
- Then, switch both the earphone and the device’s Bluetooth off.
- Thereafter, connect the earphone to the second device.
- Again, switch the first device’s Bluetooth on. The earphone gets connected to both devices.
SMART POWER OFF
Step 1: After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back into the charging case in correct orientation
and close the lid
The earbuds automatically switch off (and enter charging mode).
MANUAL POWER OFF
Step 1: Long touch both CTCs for 5 seconds to manually power off the earbuds
Step 2: Once the earbuds get turned off, place them back inside the case and
close the lid
FACTORY RESET
Perform the Factory Reset in case you face any difficulty while operating your
Airdopes Flex 454 ANC
*Note: Before performing reset, clear “Airdopes Flex 454 ANC” from pairing device history by forgetting device
Step 1: Place the earbuds inside the case.
Step 2: While the earbuds are inside the case long press the Reset Button for
10 seconds.
After successful factory reset:
- Red LED blinks quickly 5 times on the Charging Case
- White LED blinks quickly 5 times on the Earbuds
Step 3: Close the lid and then re-open it again after a few seconds.
Step 4: Perform a fresh connection attempt and enjoy!
Congratulations! Your Airdopes Flex 454 ANC has been Reset.
OTA COMPATIBILITY
Keep your Airdopes Flex 454 ANC up to date with OTA compatibility feature via
boAt Hearables App. The updates can include performance improvement, feature
addition, stability improvement, etc.
SPECIFICATIONS
Headphone Type | ANC TWS Earbuds |
---|---|
Bluetooth Version | V5.2 |
Water Resistance | IPX5 |
IWP™ Technology | Yes |
ANC | Up to 32dB |
ENx™ Equipped Microphones | 4 |
Latency with BEAST™ Mode | 60ms |
Music Playtime | Up to 10H per charge, Up to 50H additional Case playtime (Non- |
ANC mode) Up to 8H per charge, Up to 40H additional Case playtime (ANC mode)
at 60% vol
Standby| 100H
Charging Technology| ASAP™ Charge
Transmission Range| 10m
Driver Size| 10mm
Google Fast Pair| Yes
Codec Support| SBC and AAC
Frequency| 20Hz-20kHz
Battery| 480mAh (Case) 35mAh*2 (Earbuds)
Charging Time| 25min (Earbud) & 90min(Case)
Charging Interface| Type C
WARNING
- Please follow the instructions to operate
- Please don’t use the earbuds in extreme temperatures
- Please don’t use the product near water
- Please keep the product away from heat sources, as the heat may damage it
- Don’t jam the ports such as charger port, LED port, etc.
- It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life
Advisable: The earbuds may start at a 100% volume and it may need to be reduced when they are switched on at first. This can be done by using volume control on media device.
TROUBLESHOOTING
Potential Problem | Solution |
---|---|
If one earbud is not working | Perform the Factory Reset |
If earbuds are not in connection/scan mode | Perform the Factory Reset |
If earbuds disconnect during phone call | Charge the earbuds or perform the |
Factory Reset
If there are other exceptions in usage| Place the earbuds back into the
charging case & try using them again or perform
the Factory Reset
If Touch Controls don’t seem to respond| A fter long usage, residual stains &
perspiration can affect the touch control area, please use a clean cloth to
wipe those areas softly
harging norms & Precautionary Guidelines: –
- Charger/ Brick/Adapter
- Cable/ Wire| : 5V 2A
: Standard Cable (35 strands
@0.10mm diameter/ strand)
Any other accessory can be paired up with the product as long as the specifications are as per above norms.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>