aiwen NW-BL12075 Industrial Armed Wall Sconce Instruction Manual
- October 30, 2023
- aiwen
Table of Contents
aiwen NW-BL12075 Industrial Armed Wall Sconce
Product Information
The NW-BL12075 is a lamp fixture that requires installation by a qualified electrician with a license. It comes with a pegboard, terminal box, lamp body power cord, external power cord, terminal cap, lamp body, screws, lamp head, lamp shade, and a ring. The bulb is not included in the package.
Product Usage Instructions
- Before installation, changing the bulb or cleaning the fixture, turn off the power and read the installation instructions carefully.
- Fix the pegboard (5) to the terminal box (1) with screws (4).
- Link the lamp body power cord (2) to the external power cord with the terminal cap (3).
- Fix the lamp body (6) to the pegboard (5) with screws (7).
- Use the ring (10) to secure the lamp shade (9) to the lamp head (8).
- Install the bulb (not included) (10) to the lamp head (8) at the recommended wattage.
- Check if the installation is complete, then turn on the power.
Note : It is important to use the recommended wattage for the bulb to prevent damage to the fixture and ensure safety.
For any further information or assistance, please refer to the product manual or contact our customer support.
Please turn off power and read this instruction before installation, changing the bulb or cleaning the fixture. The installation must be handled by a qualified electrician with license.
NW-BL12075
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>