BRADFORD WHITE RE16U6 Residential Utility Electric Water Heater Instruction Manual

May 15, 2024
Bradford White

BRADFORD WHITE-LOGO

BRADFORD WHITE RE16U6 Residential Utility Electric Water Heater

BRADFORD-WHITE-RE16U6-Residential-Utility-Electric-Water-Heater-
FIG-1

Specifications

  • Fully automatic controls with fast-acting thermostat and high limit energy cut-off for safety
  • Direct heat transfer with a single immersed element
  • 1″ Non-CFC foam insulation for energy efficiency
  • Factory-installed true dielectric fittings for extended water heater life
  • Protective anode rod for corrosion protection
  • Voltages available: 120V, 208V, 240V, 277V, 480V
  • T&P relief valve installed
  • Approved for installation in manufactured homes
  • Copper screw type immersion element
  • 6 or 10-Year limited warranties on tank and component parts

Product Usage Instructions

Installation:

  1. Ensure the water heater is placed on a stable and level surface.
  2. Connect the cold and hot water lines to the appropriate fittings.
  3. Connect the electrical supply according to the voltage requirements.
  4. Ensure proper ventilation around the water heater.

Operation:

  • Set the desired temperature using the thermostat control.
  • Monitor the water temperature and adjust settings as needed.
  • If there are any issues, refer to the user manual for troubleshooting steps.

Maintenance:

  • Regularly check and replace the anode rod if necessary.
  • Flush the tank periodically to remove sediment buildup.
  • Inspect for leaks and address any issues promptly.

FAQ

  • What voltages are available for this water heater?
    The water heater is available in 120V, 208V, 240V, 277V, and 480V options.

  • How long are the warranties for this product?
    The product comes with 6 or 10-year limited warranties on both the tank and component parts.

The Utility Electric Models Feature

  • Fully Automatic Controls —Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety.
  • Direct Heat Transfer With a Single Immersed Element —Transfers heat directly and efficiently to the water. Screw-in style element.
  • Vitraglas® Lining with Microban®— An exclusively engineered enamel formula that provides superior tank protection from the corrosive effects of water; and with Microban® antimicrobial product protection to help prevent the growth of bacteria, mold and mildew on the surface of the tank lining.
  • Insulation System —1″ (25mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.
  • Water Connections —3⁄4″ (19mm) NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections. Located on the side for easier installation (Fittings packaged separately inside carton).
  • Protective Anode Rod —Provides added protection against corrosion for long-term, trouble-free service.
  • Voltages Available— 120V, 208V, 240V, 277V, 480V.
  • Single Phase Operation Only.
  • T &P Relief Valve—Installed.
  • These Water Heaters are Approved for Installation in a Manufactured Home —(mobile home) and must be installed in accordance with CAN/CSA Z240 MH series.

Utility Models

Model Number| Rated Nominal Capacity

U.S. Imp.

Gal. Gal.

| Standby Loss

__

__

(Watts)

| Recovery at 90°F **Rise***

__

U.S. Imp.

GPH GPH

| A

Floor to

Top of Heater in.

| B

Jacket Dia.

__

in.

| C

Floor to Cold Water Conn. in.

| D

Floor to Hot Water Conn. in.

| E

Floor to T &P Conn. in.

| F

Floor to Anode Rod in.

| G

Water Conn. NPT

in.

| H

Floor to

Electrical Access in.

| Approx. Shipping Weight

__

lbs.

---|---|---|---|---|---|---|---|---|---|---|---|---
RE16U6†| 6| 5| N/A| 7| 6| 163/16| 14| 2 3/4| 9 3/4| 93/4| N/A| 3/4| 163/16| 35
RE110U6| 10| 8| N/A| 7| 6| 177/16| 16| 55/8| 1415/16| 1315/16| 95/8| 3/4| 12| 44
RE112U6| 12| 10| N/A| 7| 6| 1615/16| 18| 23/4| 93/4| 93/4| N/A| 3/4| 1615/16| 53
RE112T6†| 12| 10| N/A| 7| 6| 275/16| 14| 23/4| 205/8| 205/8| N/A| 3/4| 275/16| 48
RE220U6| 18| 15| 42| 7| 6| 261/4| 20| 31/4| 181/2| 181/2| 18 1/2| 3/4| 261/4| 671/2
Model Number| Rated Nominal Capacity

__

Liters

| Standby Loss

__

__

(Watts)

| Recovery at 50°C **Rise***

__

Liters/ Hour

| A

Floor to

Top of Heater mm.

| B

Jacket Dia.

__

mm.

| C

Floor to Cold Water Conn. mm.

| D

Floor to Hot Water Conn. mm.

| E

Floor to T &P Conn. mm.

| F

Floor to Anode Rod mm.

| G

Water Conn. NPT

mm.

| H

Floor to

Electrical Access mm.

| Approx. Shipping Weight

__

kg.

---|---|---|---|---|---|---|---|---|---|---|---|---
RE16U6†| 23| N/A| 26| 411| 356| 70| 248| 248| N/A| 19| 411| 16
RE110U6| 38| N/A| 26| 443| 404| 143| 380| 354| 244| 19| 305| 20
RE112U6| 45| N/A| 26| 438| 457| 70| 248| 248| N/A| 19| 430| 24
RE112T6†| 45| N/A| 26| 694| 356| 70| 524| 524| N/A| 19| 694| 22
RE220U6| 68| 42| 26| 667| 508| 83| 470| 470| 470| 19| 667| 76

DIMENSION

BRADFORD-WHITE-RE16U6-Residential-Utility-Electric-Water-Heater-
FIG-2

Wattage

| Recovery

GPH Temperature Rise °F

60  80  90 100 120

|

Wattage

| Recovery

LPH Temperature Rise °C

34  45  50  56  67

---|---|---|---
1500W| 10| 8| 7| 6| 5| 1500W| 38| 30| 26| 23| 19
2000W| 14| 10| 9| 8| 7| 2000W| 53| 38| 34| 30| 26
2500W| 17| 13| 11| 10| 9| 2500W| 64| 49| 42| 38| 34
3000W| 21| 15| 14| 12| 10| 3000W| 79| 57| 53| 45| 38
3500W| 24| 18| 16| 14| 12| 3500W| 91| 68| 61| 53| 45
4000W| 28| 21| 18| 16| 14| 4000W| 106| 79| 68| 61| 53
4500W| 31| 23| 21| 19| 15| 4500W| 117| 87| 79| 72| 57
5000W| 34| 26| 23| 21| 17| 5000W| 129| 98| 87| 79| 64
5500W| 38| 29| 25| 23| 19| 5500W| 144| 110| 95| 87| 72
6000W| 41| 31| 28| 25| 21| 6000W| 155| 117| 106| 95| 79
Wattage Limitations| Voltage
---|---
120V| 208V| 240V| 277V| 480V
1500W| yes| yes| yes| yes| yes
2000W| yes| yes| yes| yes| yes
2500W| yes| yes| yes| yes| yes
3000W| yes| yes| yes| yes| yes
3500W| no| yes| yes| no| no
4000W| no| yes| yes| yes| yes
4500W| no| yes| yes| yes| yes
5000W| no| yes| yes| yes| yes
5500W| no| yes| yes| no| no
6000W| no| yes| yes| yes| yes

General:

  • All models UL® listed. These heaters are wired Single Phase, 120V with one 1500W element, unless otherwise specified. All water and electrical connections are 3/4″ (19mm) NPT. All models certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). Applicable models CSA-verified for energy performance in accordance with C191.1-M90.
  • Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Customer Service / Sales

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Bradford White User Manuals

Related Manuals