Bomcosy 15M-50FT Solar String Lights Outdoor User Manual
- May 15, 2024
- Bomcosy
Table of Contents
Bomcosy 15M-50FT Solar String Lights Outdoor
Product Information
Specifications
- Waterproof level: IP45
- Battery capacity: 3.7V 2200mAh
- Color temperature: 2700K
- Charging time: 8 hours
- Working time: Solid 8 hours, Strobe 8 hours, 12 hours total
- Lamp Spacing: 1.48ft
- Bulb Diameter: 40mm
- Bulb Type: LED 1W
- Power Per Bulb: 1.5W
- Lifespan: 12 months
- String length options: 18Ft, 25Ft, 50Ft, 80Ft, 100Ft
- Power options: 1.5W, 3W, 5W
- Solar panel options: 1.5W 5.5V, 3W 5.5V, 5W 5.5V
- Quantity of bulbs: Varies based on string length, and includes spare bulbs
Product Usage Instructions
Operation
- Locate the Mode Switch Button.
- To switch between modes: OFF, Solid, Breathing mode, Slow Strobe, Fast Strobe.
Installation Method
- Connect the light string and solar panel as per the Connection method.
- Fix the solar panel using the Hanging wall type or Ground plug method.
Note:
- Ensure the switch is ON for automatic lighting in low ambient brightness.
- The product can be charged in the sun regardless of the switch position.
- If not in use for an extended period, charge the product every three months.
- Avoid using the product near fire hazards.
FAQ
-
Q: How do I know when the product is fully charged?
A: The product is fully charged after approximately 8 hours of charging under direct sunlight. -
Q: Can I leave the product outside in all weather conditions?
A: The product is waterproof with an IP45 rating, suitable for outdoor use. However, avoiding extreme weather conditions is recommended for longevity.
PACKING LIST
- Solar string light× 1
- Solar panel × 1
- Ground plug kit × 1
- Fixing screw kit × 3
- User manual × 1
SPECIFICATION
- Waterproof level IP45
- Battery capacity 3.7 V 2200 mAh
- Color temperature 2700 K
- Charging time 8 h
- Working time solid: 8h strobe 12h
- Lamp Spacing 1.48ft
- Blub Diameter 40mm
- Bulb Type LED
- Power Per Bulb 1w
- Lifespan ≥ 12month s
OPERATION
- Mode switch button
- Mode Switch Button
2 On/Off Button
Switching method
INSTALLATION METHOD
- Connection method of light string and solar panel.
- Solar panel fixing method.
Note
- Put the switch in the ON position, when the ambient brightness is lower than 10 LUX, the light string will automatically light up;
- It can be charged in the sun regardless of whether the switch is placed in the ON or OFF state;
- If it’s not used for a long time, please charge the product every three months;
- Please use this product away from fire.
FCC STATEMENT
Operation is subject to the following three PRODUCT conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- Since the string is powered by solar energy, the bulb is a low-voltage bulb that cannot be replaced with a conventional 110V-240V bulb.
Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical & Electronic Equipment)
This Marking shown on the product or its literature, indicate that it should
not be disposed with other household wastes at the end of its working life.To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. House hold
user should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take
this.
Manufacturer: Shenzhen CMS Photoelectric echnology and Science Co., Ltd
Address: 301, Building A, No.60 Chaoyang Road, Yanchuan Community, Yanluo
Street, Baoan District, Shenzhen1