MSTETO 8611-2WUL Dusk to Dawn Sensor Outdoor Wall Light Fixtures Set of Two Instruction Manual
- May 15, 2024
- MSTETO
Table of Contents
MSTETO 8611-2WUL Dusk to Dawn Sensor Outdoor Wall Light Fixtures Set of Two
SAFETY INFORMATION
CAUTION: Read instructions carefully and turn electricity off at main
circuit breaker panel before beginning installation.
WARNING: If any special control devices are used with this fixture,
follow the instructions carefully to assure full compliance with N.E.C.
requirements. If there are any questions, contact a qualified electrical
contractor.
AFTER SALE SERVICE
Thank you for choosing MSTETO products. We look forward to bringing a new sense of design and lighting experience to your house.
If you have any questions during use, please contact us through Amazon, our service team will reply to you and provide solutions within 24 hours.
You are welcome to leave your valuable reviews on our products. Wish you a happy life.
ASSEMBLY INSTRUCTION
Assembly Steps:
ITEM: 8611-2WUL
-
Place glass 2 in Imp body 1, secure with LI-shaped piece 3, and lock with rut 4
-
Install light bulbs
-
Warning: Make sure you turn off the power switch.
2, Install mounting plate by using mounting screws. -
Connect wires per diagram.
-
Pass the wall seat 1 through the hole corresponding to the 2 hanging plates and lock it with 3 nuts
-
Combine the lamp body 2 and wall seat 1 and lock it with nut 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>