ZQIAN BEAUTY ZCY883-B High Speed Hair Dryer Instruction Manual

May 15, 2024
ZQIAN BEAUTY

High speed hair dryer

Model No: ZCY883-B

ZQIAN BEAUTY ZCY883-B High Speed Hair Dryer
Instruction

Instructions

Warning! Use/storage

  • Do not block the air inlet of the hair dryer during operation, or the hot wire may become red, causing a fire.
  • Do not soak the hair dryer in water.
  • Do not use the hair dryer in a humid environment.
  • Please keep the hair dryer dry, otherwise it may cause electric shock.
  • Do not use the hair dryer when your hands are wet, otherwise it may cause electric shock or fire due to short circuit.
  • Do not use the hair dryer near all inflammable goods, otherwise it may cause explosion or fire due to short circuit.
  • Do not wrap the main power supply line around the main body of the hair dryer during storage, otherwise the main power supply line may be disconnected, resulting in electric shock or fire due to short circuit.
  • Do not store it in a highly humid place, otherwise it may cause electric shock or fire due to short circuit.
  • Do not store it in the contact area of children and infants, otherwise it may cause electric shock or injury.
  • Do not repair, disassemble or refit the hair dryer by yourself, otherwise all hazards may occur due to incorrect operation.
  • When the power cord or plug is damaged or heated, do not continue to use it, otherwise it may cause burns, electric shock or fire.
  • For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

Warning!
matters needing attention

WARNING Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • During use, the air outlet and air nozzle may become hot. Please do not touch them with your hands, otherwise they may cause burns.
  • Please do not use this hair dryer on infants, otherwise it may cause burns.
  • Use the hair dryer in the bathroom. Please unplug it after use.
  • Do not pull the power cord forcibly, otherwise it may break the power cord, causing electric shock or short circuit and fire.
  • This hair dryer is only used to dry hair and whole hair, please do not use it to dry shoes and clothes, otherwise it may easily cause short circuit and fire.
  • When cleaning the hair dryer, make sure that the power switch is off and unplug the power plug.
  • Please regularly use a towel, cotton swab or toothbrush to remove the attachments at the air inlet and outlet.
  • Do not press or rub the air inlet and outlet with nails or sharp objects to avoid damaging the product.
  • Do not use alcohol, nail polish remover or detergent to clean the hair dryer, otherwise it may cause malfunction, cracking and fading.
  • The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
  • Children being supervised not to play with the appliance
  • when the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off
Product features

High speed brushless motor

This product uses 110000 rpm high speed brushless motor duct fan, which can instantly generate extremely strong air flow to quickly dry hair.

Intelligent temperature control system

The hair dryer is equipped with an intelligent temperature control system, which can accurately adjust and control the air flow and temperature to prevent overheating.

Intelligent alternating cold and hot air function

Briefly press the temperature gear to manually select and switch between cold air and hot air. Press the temperature gear for a long time, and the hair dryer will enter the cold and hot air alternate function state intelligently, that is, one second cold air and one second hot air work alternately. Short press the temperature gear again to exit the cold and hot air alternate circulation function.

Temperature control memory function

This hair dryer has a built-in temperature control memory function, that is, the product will work according to the previous temperature control operation when it is turned off and turned on again.

Negative ion hair care technology

The hair dryer has a built-in negative ion generator, which can effectively reduce the accumulation of static electricity, avoid the deformation, bending, or warping of hair due to static electricity, and then protect the hair.

Low noise design

By improving and optimizing the ductless brushless motor, the sharp high- frequency noise is eliminated to the sound frequency that can not be perceived by the human ear. At the same time, the product handles the air inlet duct to add silencing cotton and the motor adds a soft buffer dynamic balance structure to further reduce the noise, so as to achieve a more excellent use experience.

Function description

ZQIAN BEAUTY ZCY883-B High Speed Hair Dryer Instruction -
a1

  1. Air outlet

  2. 3 – Colors LED indicator lights
    • Red: Hot air
    • Orange: Warm air
    • Green: Cool air

  3. Off & Wind speed gear button
    • Gear 2 High wind speed
    • Gear 1 Low wind speed
    • Off

  4. Temperature control button
    • Hot air
    • Warm air
    • Cool air
    • Press and hold for 3 seconds to alternate hot and cold
    Removable magnetic air inlet screen

  5. Removable air inlet filter screen

Note: The illustrations of products, accessories, user interfaces, etc. in the manual are schematic diagrams for reference only. Due to the updating and upgrading of the product, there may be differences between the actual product and the schematic diagram. Please refer to the actual product.

Gear function

Switch/wind speed gear

Push up and down to quickly switch between two wind speeds. Before connecting the power plug, make sure that the switch key is in the off position.

Shutdown          Low wind speed      High speed wind
(OFF )                         (-)                           (=)

Basic parameters

Product Name: High speed hair dryer
Product model: ZCY883-B
Rated Voltage: 120V
Rated frequency: 60HZ
Rated Power: 1500W
Product size: 276X71X90MM

Use of Magnetic Suction Nozzle

Equipped with a magnetic suction nozzle for easyloading and unloading, the air nozzle can be easilyadsorbed by aligning it with the air outlet of the mainbody of the blower, and the shell can be rotatedfreely for easy use.

ZQIAN BEAUTY ZCY883-B High Speed Hair Dryer Instruction -
a5

  1. Wind nozzle
  2. disassemble adsorbent
  3. 360 ° rotation
Cleaning/Maintenance

reminder:
The filter screen needs to be cleaned and maintained regularly to avoid blockage of dust and other debris, so as to ensure smooth product air intake.

Cleaning and maintenance process:
Step 1: Before cleaning the filter screen, make sure that the hair dryer is turned off and the power plug has been unplugged.

  1. Shutdown
    (OFF)

Step 2: The air inlet filter screen of the hair dryer is assembled in a magnetic suction structure. Hold the handle and pull it down directly to remove it from the handle.

  1. Handle
  2. Air inlet filter screen

Step 3: Please do not clean the stainless steel filter screen with water, otherwise it may cause the blower failure. Please use dry lint free cloth, soft bristle brush, toothbrush and other tools to remove the attachments on the surface of the air inlet filter screen and stainless steel filter screen.

  1. stainless steel filter screen
  2. Air intake filter screen

Step 4: After cleaning, align the air inlet filter screen with the corresponding slot of the handle. When inserting, a “click” is heard, indicating that the magnet is in place installation is complete.

  1. “click”
Table of Chemical Element Content of Product

Part name|

Hazardous substances

---|---
lead (Pb)| mercury (Hg)| cadmium (Cd)| Hexavalent chromium (Cr (VI))| Polybrominated biphenyls (PBB)|

Polybrominated diphenyl ether (PBDE)

Plastic parts|

O

| O| O| O| O|

O

Hardware|

O

| O| O| O| O|

O

Heater assembly|

X

| O| O| O| O|

O

Motor assembly|

X

| O| O| O| O|

O

Circuit control assembly|

X

| O| O| O| O|

O

power cord|

O

| O| O| O| O|

O

enclosure|

O

| O| O| O| O|

O

This form is prepared in accordance with SJ/T 11364.

Symbol identification:

“O” Indicates the content of the hazardous substance in all homogeneous materials of the component All are below the limit specified in GB/T26572.
The numbers in this logo indicate the environmental protection of the product under normal use. The service life is 10 years.

” X ” Indicates that the hazardous substance is at least in a homogeneous material of the component
The content in the material exceeds the limit specified in GB/T26572.

Common faults and troubleshooting

|

Common faults

| Possible causes of failure| Troubleshooting
---|---|---|---
Power on does not work| Green light ring flashing alarm| Over temperature of internal components|

Restart after one minute Or return to the factory for maintenance

Yellow light ring flashing alarm

| Internal components damaged| Depot repair
Red light ring flashing alarm| The air inlet or outlet is blocked|

Clean the air intake or Air blowing port

Start protector action

| Do not switch repeatedly and quickly
Abnormal input voltage|

Detection of grid voltage

Invalid indicator

|

Not connected to the power supply

|

Check whether the power cord plug is loose

Start up normally

|

The lamp loop board is damaged

|

Depot repair

No response when pressing the hot air button

|

The key board is damaged

Reddening of hot filament

|

The control board is damaged

Power cord or plug overheating

|

The power cord is damaged or the plug is loose

Scorching smell in normal use

|

Internal components damaged

Distributor :
Xuchang Zhiqian Trading Co., Ltd.
Business Address :
BLDG 17, Lvyin Garden, Wuyi Rd., Weidu Dist.
Xuchang City, Henan Provice, CHINA
Customer Service Team :
Phone No : +8615537409770
Email : [email protected]

Manufacturer:
Nanyang Zhichuangyuan Technology Co., Ltd.
Factory Address:
Building 1, Standardization Workshop, Intersection of Pangu Avenue and Gongye Road, Industrial Agglomeration Zone, Tongbai County, Nanyang City, Henan Province

Made in China

Documents / Resources

| ZQIAN BEAUTY ZCY883-B High Speed Hair Dryer [pdf] Instruction Manual
ZCY883-B High Speed Hair Dryer, ZCY883-B, High Speed Hair Dryer, Speed Hair Dryer, Hair Dryer, Dryer
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals