DEXSO B0CDQFGGFW 13×25 Carport Oversized Heavy Duty Portable Garage User Manual
- May 15, 2024
- DEXSO
Table of Contents
CARPORT USER MANUAL
13 X 25 FT
B0CDQFGGFW 13×25 Carport Oversized Heavy Duty Portable Garage
Attention:
Please read the manual completely before starting the installation(A ladder &
an electric drill are recommended for the assem bly.)
1. Please confirm that the parts are complete and undam aged. (Corresponding
part number is affixed to each part)
If any parts are missing or damaged, please contact the cus tomer support
email to reissue or contact seller.
1.1 customer support email:
[email protected]
Please Contain: 1 Order number 2 Model number 3 Item Number 4 Photos of the
missing/damaged parts(optional)
1.2 Steps to Contact seller (amazon.com orders only):
Step 1: Log into your Amazon account
Step 2: Go to “Your Orders” and find the purchase
Step 3: Click on “Contact Seller”
Item NO. | . Item Name | Reference Image | Qty. |
---|---|---|---|
1 | Steel Pipe | 10 PCS | |
2 | Steel Pipe | 12 PCS | |
3 | Steel Pipe | 10PCS | |
A | 3-Way Corner | ||
Connector | 6 PCS | ||
B | 4-Way Corner | ||
Connector | 9PCS | ||
D | Foot Plate | 10PCS | |
Item Name | Reference Image | Qty. | |
--- | --- | --- | |
Ground Peg | ![DEXSO B0CDQFGGFW 13x25 Carport Oversized Heavy Duty Portable |
Garage - icon 1](https://manuals.plus/wp-content/uploads/2024/03/DEXSO-
B0CDQFGGFW-13x25-Carport-Oversized-Heavy-Duty-Portable-Garage-icon-1.jpg)| 30
PCS
M6 x 50MM Screw| 30 PCS+
Rope| 8 PCS
Anchor| 4PCS
Bungee Cords| 72 PCS+ 3 PCS Spares
Top Cover| 1 PCS
Sidewall| 2 PCS
Zipper Door| 2 PCS
Arrange and classify the parts neatly to facilitate installation.
This is the part structure diagram of our product, you can combine this
diagram and follow the steps to install
Start installation works
Step 1:
Assemble the long pipes required on the top of the carport (the length after
connection is 20 feet), a total of three.
You will use CD x 3 pcs, Ax 2 pcs, Bx 2 pcs for each pipe. Step 2:
Connect the obtained three 20 Feet long pipes with the pipe 2 to get the
carport roof frame.
Step 3:
Put the Top Cover on the top frame and fasten the door side with bungee cords.
You will use 6 bungees for each side. Attention: Be sure to cover the top cover at
this time, otherwise the subse quent installation will not work normally
Step 4:
Connect 2 pipe 4 with the top frame. Step 5:
Connect ! pipe 3 with the top frame Step 6:
Repeat the Step 4 & Step 5 to install another side. Step 7:
Connect the pipe D with 3,4 pipe that already installed, at this point you
will get a complete carport frame with roof. Step 8:
Use bungee cords to install the gate and side walls. Step 9:
Fix the drawstring and tent feet to the ground.