RGA TOPR-000300 Ball Rolling Robot Installation Guide
- May 15, 2024
- RGA
Table of Contents
RGA TOPR-000300 Ball Rolling Robot
Product Information
- Specifications:
- Model: XYZ-1000
- Power: 120V, 60Hz
- Dimensions: 12in x 8in x 6in
- Weight: 5 lbs
- Material: Stainless Steel
Product Usage Instructions
- 1. Unboxing and Setup:
- When you receive the product, carefully unbox it and remove all packaging materials. Place the product on a flat, stable surface.
- 2. Powering On:
- Ensure the product is connected to a power source with the provided power cord. Turn on the product using the power switch located on the side.
- 3. Operating Modes:
- The product has multiple operating modes for different functions. Refer to the user manual for detailed instructions on selecting and using each mode.
- 4. Cleaning and Maintenance:
- After each use, make sure to clean the product following the recommended cleaning instructions in the user manual. Regular maintenance will ensure optimal performance.
FAQs
- Q: How do I change the operating mode?
- A: To change the operating mode, press the mode button on the control panel and use the arrow keys to navigate through the options.
- Q: Can this product be used for outdoor purposes?
- A: No, this product is designed for indoor use only. Do not expose it to outdoor elements to avoid damage.
BATTERY INSTRUCTION
- A. USE 4 “AAA” SIZE BATTERY (NOT INCLUSION)
- CAUTIONS: Any improper use of batteries might lead to liquid leakage, heat and splits. Pay attention to the following items:
- Do not use new batteries and old ones at the same time.
- Do not use batteries of different brands at the same time.
- Do not install batteries on the wrong tor- poles
- While installing motor parts, push it 30 degrees upward gently with the tip of one finger.
- B. WAY OF USE AND PAY ATTENTION TO THE FOLLOWING:
- Do must let children play under the adult.
- Do not put small parts into the mouth, avoid eating.
- Do not touch the fire, it doesn’t function on ultraviolet radiation.
- Be included in small toys not suitable under 3 years to play.
- Please take note that the product may vary from the picture and the illustration of the package.
- If the exterior of a product the disposition and the specification are changed, excuse us.
PRODUCT DEMO
FCC
FCC Caution:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used per the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>