FLYKEYS M2 Electronic Keyboard User Manual

FLYKEYS M2 Electronic Keyboard User Manual

USER MANUAL
M2

Specification

1. 61 standard strength piano keys
2. Panel touch control
3. Two-color light conduction function of piano keys
4. Connect the learning APP function
5. The learning APP can be connected via Bluetooth and cable Two ways to connect
6. 61 keyboard percussion
7. Dual timbre and keyboard functions
8. 600 voices ,100 demos and 200 rhythms
9. Recording, programming and playback functions
10. Function of synchronization and insertion
11. Metronome function
12. There are three learning functions of duet singing, continuous singing and demonstration song
13. Single finger chord, polyfinger chord
14. Sound extension and trill function
15. Shift function
16. Master volume, accompaniment volume, beat speed control
17. MIDI input and output
18. MIDI Bluetooth
19. Built-in lithium battery: 2000mAH
20. Power: 5V/2A
21. Dimension: 903×222× 83mm(LWH)
22. Net weight: 3.5kg

I: Function keys and external ports

1. Power switch/total Volume control knob
2. Bluetooth indicator (When the Bluetooth connection is successful, the Bluetooth icon will be lit up)
3. Function selection key
4. Speed –
5. Speed +
6. Rhythm start/stop button
7. Prelude and epilogue
8. Synchronize key
9. Synthesize chord keys
10. Insert the key
11. Tone delay key
12. Piano keys
13. Songbook rack
14. Diameter 3.5mm headset post
15.17.18 .Three teaching functions
16. Chord zone
19.(0-9) Number key
20. The digit key –
21. The number + key
22. Tone selection key
23. Rhythm selection key
24. Force on/off
25. Accompaniment –
26. Accompaniment +
27. Store keys
28. Memory 1
29. Memory 2
30. Double timbre
31. Dual keyboards
32. Keyboard drums
33. Falling intonation
34. Rising voice
35. Trill key
36. Metronome
37. Record button
38. Play button
39. Programming button
40. Click the keys
41. Sing-along keys
42. Keyboard light on/off
43. Keyboard pilot light
44. Loudspeakers
45. Audio output jack
46.MIDI interface
47. Extension pedal socket
48. Diameter 6.35 mm headphone jack
49. Power socket
50. Charging indicator light

II. Use of power adapter and battery

1. Use the power adapter:

The machine is equipped with lithium battery, turn on the power switch of the piano can be used normally, or plug in the “power adapter” of the piano to “charge” the machine and use the power supply of the machine at the same time, plug the standard socket of the “power adapter” into the corresponding mains socket. The other end is inserted into the “DC5V-9V” jack at the back of the electronic organ (when the power adapter is plugged in, the “red” charging light at the side of the “DC5V-9V” socket indicates that the machine is being charged), and the power switch on the violin can be used normally (when the battery of the machine is fully charged, the “red” charging indicator light will be extinguished).

Note: When using the power adapter to power the machine, the power adapter will also charge the machine.

2. Use of battery:

The instrument is equipped with a 2000mAH lithium battery. If you need to use the instrument outside, you can use the built-in battery to power the electronic organ. When the battery is fully charged, you can turn on the power switch of the instrument.

3. Use of charging:

When using the battery of the machine for power supply is too low, the sound quality will be come smaller, worse and inaccurate,and the function display on the panel will flash or restart the machine constantly. In this case, the battery is too low, and the battery should be charged intime. Plug the “power adapter” of the piano into the mains and plug the other side into the DC socket of the piano to charge the piano(at this time, the “red” charging indicator light will light up, and when the battery is fully charged, the “red” charging indicator light will turn off, indicating that the battery is fully charged).

Warning: When the”power adapter” is connected to the piano, the “power adaptor” will charge the piano no matter the “power switch”is”on”or”off”. Please remove the “power adapter” from the mains socket when you do not use the piano and do not need to charge, so as to avoid battery damage, overheating, explosion, fire and other things.

Note:

1. It takes about (2-3) hours for the battery to be fully charged. Do not charge the battery for more than 6 hours.
2. Charge the piano when it is necessary to be supervised by a specialperson to prevent unnecessary accidents.
3. Please limit the use of the power adapter supplied by our factory.Using the wrong power adapter will lead to overheating and damage the internal components of the electronic organ.

4. Use of audio output:

The audio outlet(AUX OUT) of the electronic organ can be connected to the soundbox with a power amplifier to provide a sound source output port.

5. Use headphones:

Users can choose a headset plug with adiameter of 6.35mm and a diameter of 3.5mm. Insert these lected headset into the headset jack(PHONES).After inserting the headset,the audio output of the speaker ofthe phone will be automatically blocked.In other words, the speaker of the phone will be muted to avoid disturbing others.

(If you want to use this instrument, please pull out the headphone spike).

Note: The 6.35mm diameter of the headset header is on the back of the instrument(PHONES),and the 3.5mm diameter of the headset header is on the front left of the instrument (PHONES).

6. MIDI function:

Connect the MIDI jack of the piano to the USB jack of the computer. Through various professional MIDI editing software (such as Cakewalk, etc.),MIDI information of the piano and MIDI information of the computer can be transmitted to each other.

Note: This piano is not equipped with computer cable and MIDI editing software, users need to purchase.

III: The playing and operation of the harp

(I) The choice of power supply and sound color

1. Power switch:

The power “switch” and “total volume”control knobs are integrated knob switches. Turn clockwise to “on” and counter-clockwise to “off”.Turn the power switch to the “On” direction, then the panel functionkey will light up and display. The electronic organ automatically resets to “000” (piano tone) and the rhythm to “000” (club pop).

2. Total volume:

Great that the total volume of the adjustable or is small, the boot can be rotated principal directly under the state of the volume knob to adjust the volume of the sound big or small volume, the volume knob clockwise counterclockwise rotation volume decreases, the volume knob counterclockwise rotation to is closed at the end of the machine power supply.

3. Selection of the voice:

This instrument has a total of “600” realistic voice, from “000” to “599” can be used freely.

Before selecting a sound color, hold down the “Features” key, press the “Sound Color Selection” button, and then select the “number key”.Example: Select a voice numbered “018”.First hold down the “Features” key, then press the “tone selection” key → press the number key “0” → press the number key “1” → press the number key “8”, and then release the “Features” key, then the tone is “018”.Select the sound color numbered “113”, hold down the “Features” key, and then press the “sound color selection” key → press the number key “1” → press the number key “1” → press the number key “3” and release the “Features” key, then the sound color is “113”.(as shown below)

Use “+” and “-” to hold down the “Features” key, and then press the “Timbre” key: In the voice selection mode, press the “+” key, or press the “-” key, and the voice number increases or decreases in sequence until you select the voice.

Note: You can release the “Features” button only after selecting the desired tone. (To select any function except the total volume and the function displayed on the panel, press and hold down the “Features” key first, and then press the corresponding function key to select the required function. After selecting the required function, release the “Features” button).

4. The use of Piano keys:

When playing, no matter the user chooses any timbre to play, when the key of “Piano” is pressed once, the tone color of the Piano will be changed to “piano” timbre. If the key of “piano” is pressed again, the tone color will return to the original tone color selected just before playing.

Note:

1. According to the function of the touch pad, the finger should be raised as far as possible to more than 3 cm or so away from the touch pad, and then the finger should be as flat as possible, and slightly press down the center of the word displayed on the panel. When pressing the touch pad, the finger should cover the functional word displayed on the panel as much as possible, so that the sensitivity of the touch will be better.
   The functions indicated on the panel can be realized.

2. If you press the touchpad for more than 20 seconds, the touchpad will automatically reset. If you press and hold the touchpad for more than 20 seconds, press and hold it again after the touchpad is reset.

5. Force on/off:

The “force on/off” key is to turn on or off the keyboard force response switch. The default force is turned on when the machine is started. In the startup state, first hold down the “Features” key, then press the “strength on/off” key, once to close the strength and then press to open, so as to cycle.

(II) Use of sound effects

1. Trill:
Press and hold down the “Features” key and then the “Vibrato” key, and then release the “Features” key. At this time, the sound color will shake. If you repeat more than once, the vibrato effect will be canceled.

2. Sound extension:
Sustain “key can be directly pressed under the working condition of the piano. At this time, the sound effect of the syllable during performance can be lengthened. If you press the” Sustain “key for one more time, the effect of sustain will be canceled.

3. Use of keyboard percussion:
First hold down the “Features” button, then press the “keyboard drum” key, and then release the “Features” key, then 61 keyboards into percussion keyboards, each key corresponds to a percussion instrument; Disable Keyboard percussion: Hold down the “Features” key and press the “Keyboard drum” key again. Release the “Features” key to cancel the keyboard percussion and switch the keyboard back to playing mode.
(See Appendix IV for keyboard percussion comparison table).

4. Use of the function of lifting and adjusting:
The up and down tuning function can change the tone of the keyboard. Press and hold down the “Features” key first, and then press the “Up” or “down” key to set the variable value. Every time you press the “up” or “down” key, the tone will be “up” or “down” half a key, and the variable value range is from “+6” to “-6”. To return to the default value (00), hold down the Features key and then press the Up and Down keys at the same time.

5. Dual tone switch:
First press and hold down the “Features” key, and then press the “double tone” key. At this time, two different Musical Instruments will be played at the same time, that is, the main tone color and the selected second tone color will sound at the same time. At this time, you can press and hold down the “Features” key, then press the “tone color selection” key and the “numeric keypad” to select the required second tone color. Hold down the “Features” key and press the “Double Tone” key again to exit this function.

6. Dual keyboard switch:
Press the “Features” key first, and then press the “Double keyboard” key, then the keyboard will be divided into C2~B3 and C4~C7. The positions of C2~B3 on the keyboard correspond to the positions of C4~B5. At this time, the original timbre of C4~C7 keys can be replaced by the way of “select timbre”. Divide the keyboard into two different timbre plays at the same time. To disable this function, hold down the “Features” key and press the “Dual Keyboard” key once.

7. Metronome:
In the normal state, first hold down the “Features” key, and then press the “metronome” key every time, the beat will be 1/4 beat → 2/4 beat → 3/4 beat → Stop → 1/4 beat…For this loop, the default speed is 120.Stop the metronome: Press the Start up Stop key once.

(III) The use of demonstration music and learning function

1. Singing the demonstration song:
First hold down the “Features” key and then press the “Click” key to play the current song. Then hold down the “Features” key and press the “click” key once to stop the play. Then press again to play the next song so as to cycle.
Note: First hold down the “Features” key and then press the “chant” key to play one song at a time, then press this key to stop, then press again to play the next song, then press successively, then you can select each song in the memory of the piano.

2. Demonstration song:
First hold down the “Features” key and then press the “continuous singing” key, that is, the current song will be played. At this time, the song will start from the current song, and then the next song will be played. All songs will be played in a loop until the “continuous singing” key is pressed again.
Note: To cancel “Click” or “sing-along”, you can hold down the “Features” and press the “Start up Stop” button once.

3. Selection of Demonstration music:
In the “singing” or “singing” mode, the song selection mode will be automatically entered. You can also select the song you want through the numeric keypad. Press and hold down the “Features” key, enter the number of the demonstration song directly on the numeric key, and then release the function key.

4. Learning Function 1 (single-key mode):
Press the “Features” key first and then the “Learning 1” key to enter the single-key teaching mode. Press any key to play the main melody notes and accompanying music. If you do not play the music after selecting the music, the machine will play a certain part of the accompanying music repeatedly.Until you play any key (this function is suitable for beginners), during the learning process, you can select the demonstration songs through the “+ or -” key, select the demonstration songs: press the “Features” key and then press the “+ or -” key to select the required demonstration songs, cancel the learning function of “learning 1”.Press and hold down the “Features” key, then “Learn 1” key, and release the “Features” key to exit this function, or directly press the “Start/Stop tart up Stop” key to exit this function.

5. Learning Function 2 (follow-up mode):
Press and hold down the “Features” key first, then press the “Learning 2” key, and then release the “Features” key. At this time, the machine will play the accompaniment music of the song you selected, and the user must press the corresponding key according to the notes indicated by the light guide of the key to continue playing the next note. If not press the keys light lamp 戓 without any background operation has been repeated this section, to play a normal only after playing the next note, in the process of learning through “+ or – button to select” demonstration songs, choose demonstration song: hold the function of “Features” key then press the + or – “key to select required to demonstrate, To cancel the learning function of “Learn 2”, hold down the “Features” key and then press the “Learn 2” key, and then release the “Features” key to exit this function, or directly press the “Start/Stop tart up Stop” key to exit this function.

6. Learning Function 3 (Ensemble mode):
Press the “Features” key and then press the “Learning 3” key to enter the ensemble teaching mode. The machine will play the accompaniment music of the song, and learners can play the main melody by themselves according to the accompaniment music played by the machine. If you do not play for 3 seconds, the main melody will be played automatically, and the key light will be lit to remind the learner. In the learning process, the “+ or -” key can be used to select the demonstration song. Select the demonstration song: hold down the “Features” key and then press the “+ or -” key to select the required demonstration song, and cancel the learning function of “learning 3”.Press and hold down the “Features” key, then “Learn 3” key, and release the “Features” key to exit this function, or directly press the “Start/Stop tart up Stop” key to exit this function.

7. Keyboard light on/off:
Keyboard light/open or closed the keyboard light lamp is the key to open the key, switch on the keyboard light light is “on” by default.Press the Features key and then Keyboard Light to turn off the keyboard light. If you repeat this operation more than once, the keyboard light can be turned on.The song names and order are shown in Appendix III.

(IV) The use of recording and playback programming and playback

1. Use of recording and playback functions:
First hold down the “Features” key, then press the “record” key, and then release the “Features” key, then you can record the notes you played. After the song is recorded, hold down the “Features” key, and then press the “Play” key. Then release the “Features” key, and the song just played will be played from beginning to end. After playing, hold down the “Features” key and press the “Play” key again to play the song just recorded.To cancel the “Recording” function, hold down the “Features” key and press the “Recording” key once to exit the recording function. To cancel the “Play” function, simply press the “Start/ Stop tart up Stop” key once to exit the “Play” function.
Note: The recording can record up to “695” notes, after the record will not record the following notes.

2. Use of programming and playback:
First hold down the “Features” key, then press the “programming” key, and then release the “Features” key, the piano will automatically switch to the percussion mode keyboard, then you can play the corresponding percussion instruments on the keyboard, the piano can record the percussion music you play on the keyboard one by one (up to 128 drum beats can be recorded). After recording, hold down the “Features” key and then press the “Play” key. At this time, the piano will play the percussion sound you just edited. You can adjust the accompaniment Speed by pressing Speed+ Speed+ or Speed-speed -. To disable the programming function, hold down the Features button and press the Programming button or press the Start up Stop button once.

(V) Rhythm, integrated chord function

1. Start of rhythm:
Press the “Start/Stop key tart up Stop” button once to start the rhythmic accompaniment immediately. To disable the rhythm, press the Start/Stop tart up Stop button again.

2. Prelude/Finale:
Press the key of “Prelude/Ending” in the rhythm playing, then the rhythm will stop playing after a short piece of the finale; If you press the “Prelude/Ending” key without playing rhythm, the current rhythm will start to play after a short prelude.

3. Choice of rhythm:
This machine has 200 kinds of rhythm, numbered from “000” to “199” for you to choose, hold down the “Features” key, then press the “rhythm” key, you can select the rhythm you want on the number key. For example, if the rhythm code is 108, hold down the Features key, press Rhythm → press 1 → press 0 → press 8, and release the Features key. Press the “+” and “-” buttons to select the rhythm. Hold down the “Features” key and then press the “+” key to increase the rhythm number in sequence. Press the “-” button to decrease the rhythm number in sequence until you select the rhythm. (as shown below)

4. Selection of synchronous and integrated chord accompaniment mode:

4.1. The rhythm and the main note are played synchronically. Press the “Synch” key first, and then press the chord keyboard area (1 ~ 19 keys from the left). At this time, the rhythm will be played synchronically with the notes.

4.2.Use of Composite chord:
Press “synchronous Synch” button, then press “comprehensive Chord Chord, again in accordance with the single refers to the Chord fingering or refers to the Chord fingering playing, press the keyboard area (from left the keys of 1 ~ 19), the single refers to the Chord or refers to Chord with rhythm. Note: To cancel “Composite Chord”, press the “Composite Chord” key once. If you want to close “chord tone” with “rhythm”, press the “Start up Stop” key once to stop chord and rhythm playing.

5. Use of insert function:
Press the “Insert” key during the use of rhythm, this opportunity will automatically play a strong intermezzo, then continue the rhythm accompaniment.

6. Adjust the pace of your rhythm:
The Speed of the rhythm is set to 120 beats/min. Press the accompaniment Speed “Speed+ Speed+” or “speed-speed -” to speed up or slow down the rhythm. There are 270 sections of speed control, and the speed range is 30 ~ 300. Normal power-on mode, the preset speed is 120; When the selected song is played, the speed of the song will be the main factor, which has nothing to do with the preset speed. When playing the selected rhythm, the set rhythm speed will be the main. Press Speed+ Speed+ or speed -Speed- for more than 2 seconds to continuously increase or decrease the speed. You can adjust the Speed of a song by pressing Speed+ Speed+ or speed-speed – when playing the song.

7. Accompaniment volume:
Press and hold down the “Features” key first, then press the accompaniment volume key “Accompaniment +” to increase the electronic organ accompaniment volume, the maximum can be adjusted to “10”;Press accompaniment volume control button “Accompaniment -” to reduce the accompaniment volume, the minimum value can be set to “1”.

(VI) Use of storage memory setting function

1. Setting of working state “storage” memory:
Select the timbre or rhythm, chord and speed you need before playing according to the needs of the performer. First hold down the “Features” key and then press the “storage” key and “memory” key at the same time. At this time, the current timbre, rhythm and speed are recorded in the “memory” key, after the state has been memorized, First hold down the “Features” key and then press the “memory” key to read the tone or rhythm you set to play.
Note: There are two sets of “Save memory” keys for users to memorize two sets of different Settings. In addition, the memorized data will be cleared after shutdown.

IV: APP connection

(I) APP installation

The download link: https://www.doutan.com.cn/.

Note:

(1)After installation, please follow the steps to finish the registration.
(2)【Doutan】VIP membership needs to be purchase separately.

(II) APP connection

1. Wired Connection
Connect with phone or tablet computer via a USB cable and OTG cable.

2. Bluetooth connection
Turn on the Bluetooth function from your device. The piano Bluetooth function will be on automatically when the piano is on.
(1) In the main interface, select [Me], then click the [Keyboard], click the [Intelligent Piano], click the [To connect the device];
(2) Select the corresponding device in the Bluetooth MIDI device for Bluetooth connection, device name [M2 MIDI];
(3) After the connection display [Connected], the APP automatically enters the keypad interface, and the functions of the piano can be controlled by operating the keypad interface.

(III) Further function

The below functions require software support. Here we use【Doutan】APP as an example to illustrate the details.

1. Double color LED intelligent light
Connect the APP and play a music, the LED light will be on. Practice the music by following the LED light. Red light for left hand, blue light for right hand.

2. Intelligent accompanied playing
You can set accompanied playing mode. For example, when you set right hand accompanied playing, the piano will play the right hand part of the music, you only need to play the left hand part.

3. Intelligent following practice
Follow the LED light to practice the music.

Appendix I (600 kinds) Voice List

Appendix II (200 kinds) Rhythmic List

Appendix III (100 kinds) Demo List

Appendix IV: 61 groups of keyboard percussion comparison table

Appendix V: single finger chord chart

Appendix VI: multi-fingered chord chart (1)

Appendix VII: multi-fingered chord chart (2)

Maintenance precautions

It is very important to do the maintenance of the piano well and reduce the fault.

• do not open the shell of the piano and try to decompose the components, and do not make any changes to the interior. If the function is abnormal in use, please stop using the instrument and send it to qualified maintenance personnel for maintenance.
• please use the specified voltage and adapter, using the wrong voltage and adapter will damage the electronic organ.
• before connecting the instrument to other devices, all the power should be turned off and the volume should be turned down to the lowest level.
• do not put the power adapter near a heat source (such as a heater or radiator). Do not bend the adapter wire too much. Do not place heavy objects or wind other objects on the adapter wire to avoid damaging the adapter wire. Do not use the plug of the instrument in the multi-purpose socket and near the flammable and explosive places, so as not to cause danger. When need not be in long time or thunder, want to close power supply and adapter unplug, when unplug adapter power supply plug, want to hold adapter to pull out, do not pull wire directly. The adapter used in this product cannot be used for other products to avoid danger.
• do not put the instrument in an environment with dust, vibration, low temperature or high temperature (such as in direct sunlight, next to the heater or in the car under the sun) to avoid damage to the appearance and internal components.
• do not put the instrument in an unstable place, lest it is damaged by falling. Do not sit or place heavy objects on the harp.
• avoid the electric piano from rain or damp. Do not place liquid containers on the instrument to prevent liquid from flowing into the instrument and damaging the internal components.
• please remove the adapter before cleaning the instrument body. Do not use wet hands to insert or remove the adapterWipe it.
• do not use paint coating, organic solvent or chemical impregnation cloth to wipe the piano body, do not put vinyl products on the piano body, so as not to make the panel or keyboard fade, check the adapter regularly and remove the dirt on its surface.
• Wet weather needs to do a good job of moisture-proof work, because excessive humidity will make the internal circuit bad phenomenon. Therefore, the instrument should always be electrified in wet weather, and dissipate the moisture in the instrument through the heat generated during operation. If the weather is too humid, use a dust proof damp cloth to cover the instrument.
• it must be used by adults after opening the packaging, please remove the plastic packaging bag and other packaging items properly stored or discarded, do not let children play, prevent suffocation! This product contains small parts, do not put into the mouth to avoid accidental swallowing, this product is not suitable for children aged 3 and under.

The specifications are subject to change without prior notice.

This instruction manual and the design of the packing box are for reference only.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Manufactured by
Guangzhou Pearl River Amason Digital Musical Instrument Co.,Ltd

Add:No.38.Xiangshan Ave,Zengcheng Economic and Technological Development
Zone,Guangzhou China
Tel:+86-20-36574618
Fax:+86-20-81764948
Email:maggiechen@prpiano.cn
NO.:00

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>